REMMULTI-KEY

Description

REMMULTI-KEY – Superior Self-learning multi-frequency RF remote control for gates and garage doors
The self-learning universal multi-frequency remote control for most common gates and garage doors.

Features:
• Ability to program up to 4 devices with 4 different frequencies
• The programming is simple and fast
• Large buttons for added convenience
• Maximum compatibility
• Handy keychain
• Powered by 2x CR2016 (3V) batteries (included)

Specifications:
It can replace original fixed code remote control operating at the frequencies (MHz) shown below:
• 280~360
• 288
• 300
• 303
• 303.825
• 306
• 310
• 318
• 385~400
• 390
• 403.55
• 418
• 433.92
• 868.1~869.3

Codes with different frequencies can be stored on each button (up to 4 different codes).
For example you can memorize:
• Button A: FAAC – 315 MHz
• Button B: Multicode – 310/315 MHz
• Button C: Hormann – 433.92/868.3 MHz
• Button D: Marantec – 330/433.92 MHz

Programming instructions:
1 Press buttons “A” and “B” simultaneously, holding them until the LED blinks quickly (about 5 seconds), then release both buttons and the LED will turn off.
2 Hold the original remote and the Superior “Multi-key” remote as close as possible to each other.
3 Press simultaneously the button on the original control you wish to memorize and that on the Superior “Multi-key” remote you wish to store that code. After 5 seconds, the LED will blink quickly to confirm programming was successful.
ATTENTION: If the LED blinks only once the code has not been memorized correctly. Please, repeat steps 2 & 3.
4 Repeat steps 2 & 3 to memorize any new original code on the Superior “Multi-key” remote buttons.

SUPERIOR