FIL-LTE50

FIL-LTE50

FIL-LTE50 – Outdoor 5G LTE Filter with DC pass F-jack to F-jack

Categories: , ,

Description

Description

FIL-LTE50 – Outdoor 5G LTE Filter with DC pass F-jack to F-jack
 
LTE Filter 50dB Outdoor 690MHz Tecatel FIL-LTE50EXT/2L
 
Description:
5G LTE exterior filter to adapt your DTT system. Filter with external housing to place on the mast of the UHF antenna, always install before the internal or mast amplifier.

This low pass filter with a large rejection of 50dB from 690 MHz eliminates all interference caused by the 5G frequency band.

How to install an outdoor LTE filter?
It is always recommended to install the 4G/5G LTE filter prior to the amplifier to prevent it from amplifying the signals that interfere with DTT programming. In this case it is an external filter, so it can be placed on the mast next to the antenna and then place the mast or indoor amplifier. This filter has DC current pass to power active antennas that require it, so if it is your case you will not have problems in this regard. 2 “F” type male connectors are required for connection (not included).

Features:
● 5G LTE Band-stop-filter with DC-pass
● Outdoor weather-proof housing
● F-female and F-female
● Prevents transients in the DVB-T / DVB-T2 range by LTE
● LTE: LTE2 / 5G (2nd Digital Dividend)
● Impedance: 75 Ω
● DC pass through: YES
● Channel: 5 MHz – 694 MHz
● Through loss:
– 174 – 692MHz: 0,4…2dB
– 695MHz: >50dB
● Size: 52x80x20 mm
● Weight 45 gr

Go to Top