WNAP-6325 – 2.4GHz 300Mbps CPE Outdoor Wireless 14dBi Antenna
WNAP-6325
Description
Description
2.4GHz 300Mbps CPE Outdoor Wireless 14dBi Antenna
WNAP-6325 2.4GHz 300Mbps 802.11n Outdoor Wireless CPE (Built-in 14dBi Antenna)
Description:
Reliable Wireless Solution
The WNAP-6325 is designed to provide a reliable wireless solution for outdoor wireless deployment. Utilizing the same transmission power as 802.11g devices, the WNAP-6325 offers significant range and superior throughput than traditional 802.11g wireless device. With its embedded 14dBi dual-polarization (vertical and horizontal) directional antenna, it provides good diversity coverage and better noise immunity, optimizing the performance of a long-distance, outdoor connection even in environments with many other 2.4GHz wireless equipment.
Designed for Various Applications
The WNAP-6325 is specifically designed for WISP solution to provide CPE users with Internet access utilizing WISP services such as in rural areas. In addition, the unit addresses various wireless communication connectivities (AP / Client / WDS PtP / WDS PtMP / Repeater), thus meeting users’ application requirements.
Advanced Security Authentication
The WNAP-6325 supports WEP, WPA / WPA2, WPA-PSK and WPA2-PSK wireless encryptions. With advanced WPA2-AES mechanism and 802.1X RADIUS authentication, the WNAP-6235 can effectively prevent snooping by unauthorized users or bandwidth occupied by unauthenticated wireless access. In addition, the WNAP-6325 can grant or deny access to the Wireless LAN network based on a pre-configured ACL (Access Control List).
Flexible and Reliable Outdoor Characteristics
The WNAP-6325 is ideal for applications such as an IP surveillance network, the backhaul link of building to building and the backbone of a public service. Additionally, the self-healing/schedule reboot capability keeps connections active at all times. Meeting the IP55 rating for outdoor UV resistant enclosure, the WNAP-6325 can withstand rigorous weather conditions and can be installed in any harsh, outdoor environments. With the proprietary Power over Ethernet (PoE) design, the WNAP-6325 can easily be installed in areas where power outlets are not available.
Easy Deployment and Management
With user-friendly Web UI and step-by-step setup wizard, the WNAP-6325 is easy to install, even for users without experience in setting up a wireless network. In addition, Planet’s Smart Discovery Utility function and SNMP-based management interface, the WNAP-6325 is convenient to be managed and configured remotely.
Key Features:
• Standard: IEEE 802.11b/g/n
• Standard: IEEE 802.11b/g/n
• Max. Data Rate: IEEE 802.11n (40MHz): 300Mbps
• Antenna: Built-in 12dBi dual-polarization
• Network Interface: 1 x 100TX PoE, 1 x 100TX Passive PoE Pass-through
• Max. Client: 25 Wireless, 60 Wired
• Operating Temp: -20° to 70°C
• Power System: 24V DC, 1A/Passive-PoE
PLANET
Brand
Brand
Planet
Specifications
Specifications
|
Hardware Specifications |
|
| Standard Support | IEEE 802.11b/g/n |
| IEEE 802.3 | |
| IEEE 802.3u | |
| IEEE 802.3x | |
| Memory | 64 Mbytes DDR SDRAM |
| 16 Mbytes Flash | |
| PoE | Passive PoE |
| Interface | Wireless IEEE802.11b/g/n, 2T2R |
| PoE LAN (LAN 1): 1 x 10/100Base-TX, auto-MDI/MDIX, passive PoE | |
| LAN 2: 1 x 10/100Base-TX, auto-MDI/MDIX, passive PoE pass-through | |
| Antenna | Built-in 12dBi dual-polarization antenna |
| – Horizontal: 30 degrees | |
| – Vertical: 20 degrees | |
| Wireless RF Specifications | |
| Wireless Technology | IEEE 802.11b/g |
| IEEE 802.11n | |
| Data Rate | IEEE 802.11b: 1, 2, 5.5, 11Mbps |
| IEEE 802.11g: up to 54Mbps | |
| IEEE 802.11n (20MHz): up to 150Mbps | |
| IEEE 802.11n (40MHz): up to 300Mbps | |
| Media Access Control | CSMA/CA |
| Modulation | Transmission/Emission type: OFDM |
| Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM | |
| Frequency Band | 2.412GHz ~ 2.484GHz |
| Operating Channel | America/ FCC: 2.414~2.462GHz (11 Channels) |
| Europe/ ETSI: 2.412~2.472GHz (13 Channels) | |
| Japan/ TELEC: 2.412~2.484GHz (14 Channels) | |
| RF Output Power (Max.) | IEEE 802.11b: up to 26 ± 1dBm |
| IEEE 802.11g: up to 23 ± 1dBm | |
| IEEE 802.11n: up to 22 ± 1dBm | |
| Receiver Sensitivity (dBm) | IEEE 802.11b: -94dBm |
| IEEE 802.11g: -91dBm | |
| IEEE 802.11n: -89dBm | |
| Output Power Control | 12~27dBm |
| Power Consumption | 12W |
| Power Requirements | LAN: 24V DC, 1A/ Passive PoE |
| Pin 4,5 V DC+ | |
| Pin 7,8 V DC- | |
| Pin 3 Reset | |
| Software | |
| LAN | Built-in DHCP server supporting static IP address distribution |
| Supports 802.1d STP (Spanning Tree) | |
| WAN | ■ Static IP |
| ■ Dynamic IP | |
| ■ PPPoE | |
| Operating Mode | ■ Bridge |
| ■ WISP | |
| Firewall | NAT firewall with SPI (Stateful Packet Inspection) |
| Built-in NAT server supporting virtual server and DMZ | |
| Built-in firewall with port/ IP address/ MAC/ URL filtering | |
| Wireless Mode | ■ AP |
| ■ Client | |
| ■ WDS PTP | |
| ■ WDS PTMP | |
| ■ * WDS Repeater (AP+WDS) | |
| Channel Width | 20MHz / 40MHz |
| Wireless Isolation | Enable to isolate each connected wireless client to let them cannot access mutually |
| Encryption Type | 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1x |
| Wireless Security | Wireless LAN ACL (Access Control List) filtering |
| Wireless MAC address filtering | |
| Enable/Disable SSID Broadcast | |
| Multiple SSIDs | * Up to 8 |
| Max. Wireless Clients | 25 |
| Max. WDS APs | 8 |
| Max. Wired Clients | 60 |
| WMM | Supports Wi-Fi multimedia |
| QoS | Supports Quality of Service for bandwidth control |
| NTP | Network Time Management |
| Self Healing | Supports Schedule Reboot |
| Management | Web UI, DHCP Client, Configuration Backup and Restore, Dynamic DNS, and SNMP |
| Diagnostic Tool | System Log, Ping Watchdog |
| Environment and Certification | |
| Operating Temperature | -20~70°C |
| Operating Humidity | 10~95% non-condensing |
| IP Level | IP55 |
| Regulatory | CE, FCC, RoHS |
| Accessory | |
| Standard Accessories | ■ WNAP-6325 x 1 |
| ■ PoE Injector x 1 | |
| ■ Power Cord x 1 | |
| ■ Plastic Strap x 1 | |
| ■ Quick Installation Guide x 1 | |
| Remarks | * means future firmware support |
