HI-SF0420F2L – 4+2-Port 10/100Mbps Desktop Switch with 4-Port 24V PoE Switch 72W



4+2-Port 10/100Mbps Desktop Switch with 4-Port 24V PoE Switch 72W, Passive
Easy Deployment for SOHO and Home Users
HI-SF0420F2L is a fast PoE Switch with 4*10/100Mbps PoE ports, 2*10/100Mbps Up-Link Ports. All Ports support auto-negotiation, auto MDI/MDIX, the PoE ports support 24V Passive PoE, can be easily and quickly deployed for SOHO and home-use PoE application environment by any users as it is compact in size and simple to install. The HI-SF0420F2L is definitely an ideal solution for SOHO and home users as it has the following advanced features:
• 4-port PoE, 72-watt PoE budget
• Two 10/100Mbps uplink ports
• 250m distance w/30W power output at speed of 10Mbps in the Extend Mode
• Desktop/Wall design
• Fanless design

TwoFast Uplink Ports
The HI-SF0420F2L comes with two uplink ports with 100Mbps transfer rate to ensure high-speed data, reliable assurance for connection between the WiFi transmition network and outside network where the four PoE ports can be used to their full potential.

Ideal Solution for Securing SOHO WiFi Network Infrastructure
Targeting the growing WiFi Network applications, the HI-SF0420F2L 24V PoE Switch is also positioned as a Network Switch for quick and easy PoE WiFi deployment with power feeding. The HI-SF0420F2L supports 24V PoE along with four 10/100BASE-TX ports, and two extra Fast Ethernet TP interface supporting high-speed transmission of data.
The built-in solid DIP switch provides “Standard” and “Extend” operation modes. The HI-SF0420F2L operates as a normal 24V PoE Switch in the “Standard” operation mode. In the “Extend” operation mode, the HI-SF0420F2L can support PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the HI-SF0420F2L provides an additional solution for 24V PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates ports so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.

Intelligent PoE and Port Priority
Support 24V passive POE. If power consumption is overloaded, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.

Easy Cable Connection
With data switching and power over Ethernet integrated into one unit, the HI-SF0420F2L reduces cabling requirements and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. With 4 PoE interfaces, the HI-SF0420F2L is ideal for small businesses and workgroups making the deployment of the PoE facility including wireless access points, IP-based surveillance camera and IP phones in any places easier, more efficient and more cost-effective.

Plug and Play, easy maintenance
Desktop/wall-mount metal case, plug and play, LED indicator show the working status, quickly to configure and maintain.

Key Features:
RJ45 Interface
• Six 10/100Mbps Fast Ethernet ports
• 4 ports support 24V DC power to PoE Passive PD equipment

Power over Ethernet
• 24V Power over Ethernet end-span
• Supports PoE power up to 30 watts for each PoE port
• 72-watt PoE budget
• Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m in the standard mode
• Data Pins:1236

• Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 1K absolute MAC addresses
• Automatic address learning and address aging
• Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing

• Desktop/wall design
• LED indicators for PoE ready/activity and LINK/ACT
• One DC 24V 3A external power supply
• Power cord with UK type plug included



Product 4+2 Port Passive POE Switch
Model HI-SF0420F2L
POE Port 1 to 4 Supply Power
Up Link Port 2 Port
Power Pin 4/5+7/8-
Input Power DC 24V/3A
POE Type End-span
Power Distance ≤250m
Network Standard IEEE 802.3、 IEEE802.3u、802.3x、802.3af/at
Network Medium 10/100BASE-TX:5 class and above non shielded twisted pair
Data Distance ≤250m
Switch Capability 1.6Gbps
Forwarding Mode Store and forward
Forwarding Rate 10BASE-T:14880PPS/port
MAC Address MAC address table 1K
Port Function Power priority mechanism, fast and forward, MAC automatic learning and aging
IEEE802.3X Full-duplex and mode and backpressure for Half-duplex mode
LED Indicator Each port occupied 1 LINK/ACT.100Mbps,
POE Status Indicator, Whole power indicator; Extend Indicator
Working Environment Working temperature:-10°~55°C
Weight 0.24kg
Size 136×66×32(L*W*H)mm
Go to Top