LATEST ARRIVALS

DIGITAL RF MODULATORS

TECHNOMATE TM-RF HD	Description:
HDMI input DVB-T modulator	Connect any HDMI device, e.g. satellite receiver, CCTV system, Blu-ray
	player, etc. and watch it in Full HD 1080p over a coaxial RF system.
	–
	If you already have an existing Standard Definition RF distribution
	system but your device is in High-Definition, just change your existing
	RF modulator to this and watchin High-Definition 1080p on a DVB-T or
	DVB-T2compatible TV. The cabling is exactly the same.
	–
	Can also be cascaded with multiple TM-RF HD so you can watch different
	devices on different TVs! Such as CCTV on TV1, Satellite on TV2, etc.
	–
	All settings are controlled via the onboard menu screen and buttons.
	Automatic HDCP and EDID management continuously monitors
	communication between connected devices.
	–
	Technical Features:
	• HDMI DVB-T RF Modulator
	• 1080p High-Definition over RF
	• Converts an HDMI signal into an HD digital Freeview DVB-T compatible
	signal
	• Cascadable
	• Automatic EDID & HDCP Communication
	• Requires a DVB-T or DVB-T2 compatible TV
	• LCD screen for easy setup & configuration
	• HDCP 1.3 Compliant
	• DVB-T COFDM Modulation
	• LCN, Channel Name Edit
	• USB – software updates only
	• Wall Mountable Metal Housing

OUTDOOR
CONDOR YA7	CONDOR YA15

Yagi 7	Yagi 15
UHF 21-60 GAIN 13db	UHF 21-60 GAIN 14,5db
470-790 Mhz	470-790 Mhz
75 Ohm with F-connector	75 Ohm with F-connector
Length of antenna: 0,75m	Length of antenna: 1,25m
–	–
CONDOR TF25	CONDOR TF45

UHF 21-69 GAIN 13,5db	UHF 21-69 GAIN 15db
470-862 Mhz	470-862 Mhz
75 Ohm with F-connector	75 Ohm with F-connector
Length of antenna: 0,80m	Length of antenna: 1,05m
–	–
CONDOR TT90	CONDOR TT120

UHF 21-69 GAIN 15db	UHF 21-69 GAIN 17db
470-862 Mhz	470-862 Mhz
75 Ohm with F-connector	75 Ohm with F-connector
Length of antenna: 1,05m	Length of antenna: 1,40m
–	–


WB4820	WB4830	WB4840
Wall mount pipe support	Wall mount pipe support	Wall mount pipe support
Pipe Φ 48mm	Pipe Φ 48mm	Pipe Φ 48mm
Length: 20cm	Length: 30cm	Length: 40cm

High-Band Circular (LO 10.75 GHz) for NTV+
INVERTO	INVERTO
IDLB-SINR42	IDLB-QUDR41
SINGLE	QUAD
LO 10.75 GHz	LO 10.75 GHz

DIGITAL RF MODULATORS


TERRA MHD101	Modulating from HDMI source into COFDM modulated DVB-T RF channel
Agile TV modulators HDMI to DVB-T	–
modulator	Description:
	The MHD101 is a high quality DVB-T “Home” modulator which
	accepts one HDMI signal and converts it into one RF DVB-T channel
	on its output. The excellent picture (Full HD 1920*1080-30p) and
	modulation quality (MER~35 dB) renders the MHD101 the ideal
	solution for distributing HD TV signals coming from e.g. a STB or
	CCTV in a CATV network using the DVB-T technology.
	–
	The user has the ability to control the device by either using the
	onboard SSD (Seven Segment Display) interface and keypad for
	quick installation or by using the USB interface with the appropriate
	software accompanying the MHD101 for advance programming.
	–
	Finally, the MHD101 s metal case provides excellent electromagnetic
	shielding as well as great temperature dissipation and rigidness.
	–
	Technical Features:
	● High quality and performance
	● HDMI – DVB-T stand-alone modulator
	● H.264 HD encoder bitrate 1-19 Mbps
	● MER value ~ 35 dB
	● HDCP support
	● Very friendly user interface for quick installation
	● LED display and push buttons control of internal microprocessor
	● USB interface for advanced programming
	● Very clean RF spectrum
	● RF output frequencies 174…862 MHz
	● Adjustable RF output level
	● Wall mounting
	● External power supply
	● Mains 230 AC adapter in delivery
	● Connectors:
	digital input – HDMI
	socket RF – type F
	PC connection – USB
	DC entry – 5.2/2.1 mm DC jack

Multichannel headend 4XX series
	sda410C – DVB-S/S2 to IP and ASI
	Modular reception system, DVB to IP streamers
	IP streaming and ASI output of free-to-air or descrambled DVB services
	–
	One channel IP streamers
	● common interface
	● one SAT transponder (descrambled or FTA)
	● BISS descrambling
	● SPTS or MPTS IP stream
	● regeneration of information contained in the MPEG-2 tables
	● UDP and RTP transmission protocols
	● SDP/SAP protocol support
	● Web control and SNMP agent
	● loop through RF distributing
	● DIN rail or wall mounting
	● robust die-cast housing
	● connectors:
	RF inputs, ASI input/output – type F
	Ethernet control, Ethernet stream output – RJ-45
	CAM – PCMCIA
	screw terminal block for DC entry
	power distribution bus
	–
	RF input: QPSK / 8PSK
	frequency range: 950-2150 MHz
	AGC range/impedance: 45-85 dBμV / 75 Ω
	symbol rate: 2-45 Ms/s
	–
	LNB powering/control: 0/14/18 V & 300 mA max. DiSEqC 1.0
	–
	IP output:
	standard: IEE802.3 10/100 Base T
	bit rate: up to 100 Mbps
	transmission protocols: UDP/RTP
	multicast: YES
	MPTS: YES
	SPTS: YES
	–
	ASI output:
	bit rate: up to 72 Mbps
	impedance: 75 Ω
	packet length: 188 bytes
	MPTS: only
	–
	Control port: standard IEE802.3 10/100 Base T
	Current consumption: 12V – 0.2 A


MV SERIES – 5 cable system, Remotely powered multiswitches
	TERRA
	MV508
	–
	For large installations of SAT IF distribution systems
	In line powering through H lines
	All components of 5 cable distribution system are compatible to each other
	Length of the subscriber line up to 80 meters
	Four positions discrete gain regulator for each SAT IF line and separate 16
	positions discrete gain regulator for terrestrial TV
	Optimized for operation with terrestrial digital/analog signals
	Active terrestrial TV path is powered from central power supply allows to receive
	terrestrial TV programs without switching on SAT TV receiver
	LED indication of 18 V line powering
	Possibility to supply powering for LNBs and network equipment from external +18V
	power supply unit: recommended power supply – PS182F
	Die-cast housing providing high screening efficiency
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 47-862 MHz
	Output level for SAT IF (IMD3=35 dB): 105 dBμV
	–
	MV508: 5×8 outputs multiswitch


MR SERIES – 9 cable system, Radial multiswitches
	TERRA
	MR908L
	–
	Star distribution system of 8 SAT IF polarities and terrestrial TV signal
	integrated LTE signal suppression filter
	Built-in power supply for remote DC feeding for LNBs
	Possibility to feed DC for preamplifier through terrestrial TV input
	Gain regulators for every SAT IF input and separate 1 dB step regulator for
	terrestrial TV
	Passive and active Terr.TV path
	Die-cast housing providing high screening efficiency
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: active 47-790 MHz; passive 5-862 MHz
	Output level for SAT IF (IMD3=35 dB): 93 dBμV
	–
	MR908L: 9×8 outputs multiswitch

			–
	Model No:		TM-3770FULMO
	Category:		Full-Motion Flat Screen Wall Bracket
	Descript.:		for flat screens 37″-70″ (94-178cm)
			holds weight up to 50kg
	Details:		black colored
			compliant for all holes pattern including VESA standard
			max. hole pitch: 600×400 mm
			wall distance adjustable: 64-510 mm
			adjust. screen tilt:-20°/+10°, lateral rotation:-60°/+60°
			Swivel angle :±3°
			adjustment possible without tools – at any time
			incl. mounting guide and complete mountings in gift box
			–

			–
	Model No:		TM-2342CEISM
	Category:		Flat Screen Ceiling Bracket
	Descript.:		for flat screens 23″-42″ (58-107cm)
			holds weight up to 30 kg
	Details:		Color: black
			compliant for all holes pattern including VESA standard
			max. hole pitch: 200×200 mm
			adjustable screen tilt:-20°/+20°
			adjustable length: 625 – 875 mm
			Swivel angle : -90°/+90°
			Mounting on flat ceilings or bevelled/angled ceilings
			incl. mounting guide and complete mountings in gift box
			–
			–
	Model No:		TM-3250CEI
	Category:		Flat Screen Ceiling Bracket
	Descript.:		for flat screens 32″-50″ (81-127cm)
			holds weight up to 50 kg
	Details:		Color: black
			compliant for all holes pattern including VESA standard
			max. hole pitch: 400×200 mm
			adjustable screen tilt:-0°/+15°
			adjustable length: 1050 – 1560 mm
			Swivel angle :360°
			Mounting on flat ceilings or bevelled/angled ceilings
			incl. mounting guide and complete mountings in gift box
			–

	Model No:		TM-3260TIL
	Category:		Flat Screen Wall Bracket
	Descript.:		for flat screens 32″-60″ (81-152cm)
			holds weight up to 50kg
	Details:		Color: black
			compliant for all holes pattern including VESA standard
			adjustable screen tilt:-15°/+15°
			max. hole pitch: 600×400 mm
			wall distance: 74 mm
			incl. mounting guide and complete mountings in gift box
			–

			–
	Model No:		TM-3260 FIX
	Model No:		Flat Screen Wall Bracket
	Descript.:		for flat screens 32″-60″ (81-152cm)
			holds weight up to 50kg
	Details:		Color: black
			compliant for all holes pattern including VESA standard
			max. hole pitch: 600×400 mm
			width: 755 mm
			wall distance: 26 mm
			incl. mounting guide and complete mountings in gift box
			—
			–
	Model No:		TM-2342TIL
	Category:		Flat Screen Wall Bracket
	Descript.:		for flat screens 23″-42″ (58-107cm)
			holds weight up to 50kg
	Details:		Color: black
			compliant for all holes pattern including VESA standard
			adjustable screen tilt:-15°/+15°
			max. hole pitch: 400×200 mm
			wall distance: 60 mm
			incl. mounting guide and complete mountings in gift box
			–

	Model No:		TM-1342
	Category:		Full-Motion Flat Screen Wall Bracket
	Descript.:		for flat screens 13″-42″ (33-107cm)
			holds weight up to 20kg
	Details:		Color: black
			compliant for all holes pattern including VESA standard
			max. hole pitch: 200×200 mm
			wall distance adjustable: 97 mm
			adjust. screen tilt:-15°/+15°, lateral rotation:-40°/+40°
			Swivel angle :±360° (Portrait or Landscape Viewing mode)
			Cable management, Anti Theft (requires padlock)
			adjustment possible without tools – at any time
			incl. mounting guide and complete mountings in gift box
			–
			–
	Model No:		TM-1342-1
	Category:		Full-Motion Flat Screen Wall Bracket
	Descript.:		for flat screens 13″-42″ (33-107cm)
			holds weight up to 20kg
	Details:		Color: black
			compliant for all holes pattern including VESA standard
			max. hole pitch: 200×200 mm
			wall distance adjustable: 92-258 mm
			adjust. screen tilt:-15°/+15°, lateral rotation:-90°/+90°
			Swivel angle :±360° (Portrait or Landscape Viewing mode)
			Cable management, Anti Theft (requires padlock)
			adjustment possible without tools – at any time
			incl. mounting guide and complete mountings in gift box
			–
			–
	Model No:		TM-1342-2
	Category:		Full-Motion Flat Screen Wall Bracket
	Descript.:		for flat screens 13″-42″ (33-107cm)
			holds weight up to 20kg
	Details:		Color: black
			compliant for all holes pattern including VESA standard
			max. hole pitch: 200×200 mm
			wall distance adjustable: 92-417 mm
			adjust. screen tilt:-15°/+15°, lateral rotation:-90°/+90°
			Swivel angle :±360° (Portrait or Landscape Viewing mode)
			Cable management, Anti Theft (requires padlock)
			adjustment possible without tools – at any time
			incl. mounting guide and complete mountings in gift box
			–

	TECHNOMATE
	TM-500HP
	–
	Turn any electrical outlet into a high-speed network connection
	With the TM-500 HP you can extend your home network by using electrical
	sockets. Forget about drilling and rewiring cable throughout your house,
	with the TM-500 HP you can have internet anywhere in the house (on the
	same powerline) in a simple and convenient plug ‘n’ play system with no set
	up required.
	–
	Complying with the HomePlug AV standard, the TM-500 HP gives you a data
	transmission speed of up to 500Mbps, together with the built-in QoS that
	gives bandwidth intensive and sensitive applications a higher priority to
	remain stable and fast.
	–
	Forget Wireless
	No need to worry about wireless signal strength and walls reducing signal quality.
	–
	Simply Plug ‘n’ Play
	No complex configuration is required for installation, just plug one adapter
	into a power outlet, connect it to your computer via the network cable, plug
	the second adapter into another power outlet and press the encryption button
	and you are ready to go!
	–
	HD Multimedia Streaming
	Connect your Internet-ready TV, Blu-ray™ player, IPTV set-top box or gaming
	console through any power outlet in your home for super-fast 500Mbps transfer
	speeds.
	–
	Secure
	With its powerful 128-bit AES encryption, your network is secure and protected.
	–
	Product Features:
	TM-500HP 500Mbps HomePlug Ethernet Adapter Starter Kit
	Extremely small…smaller than a credit card!
	HomePlug AV Compliant
	Up to 200m range over household powerline
	Plug ‘n’ Play – no configuration necessary
	Up to 60% Reduction in energy consumption (standby mode)
	128-bit AES Encryption
	Built-in QoS
	Includes: 2x 500Mbps HomePlugs, 2x 1.8m Ethernet Cable, CD
	Power socket: UK Type

IR REMOTE EXTENDERS
	Ebode
	IRLPKUK – IR Link P
	WIRE
	–
	Description
	The ebode IR Link P is an InfraRed extender system that allows full
	InfraRed remote control operation of A/V components located behind
	closed cabinet doors or other concealed and/or out-of-sight locations.
	The ebode IR Link P uses power from the mains (no battery required).
	An InfraRed Extender in general consists of an IR (InfraRed) capture
–	device, the Receiver, a distribution circuit/connecting block, the Hub,
	and finally the IR LED output, the Emitter, which flashes the IR signal
	to the A/V component.
	–
	Set content
	The ebode IR Link P consists of 3 parts:
	1x IR Receiver IRLP TRX
	1x IRHUB1 with attached IR Emitters and extra 3.5mm jack for
	Emitter expansion
	1x 12VDC Power supply wall adapter


	Ebode
	IRLCKUK – IR Link C
	COAX
	–
	Description
	The IR Link C is a mains powered InfraRed Extender System that
	allows full remote control operation of audio/video components (such
	as your Blu-ray player, A/V Receiver, DVR, Satellite Box, Cable Tuner,
	etc.) which are located in another room and makes use of existing
	coax cable (CATV).
	An InfraRed Extender in general consists of an IR (InfraRed) capture
	device, the Receiver, a distribution circuit/connecting block, the Hub,
	and finally the IR LED output, the Emitter, which flashes the IR signal
	to the A/V component.
	–
	Set content
	The ebode IR Link C consists of the following supplied parts:
	1. One InfraRed Receiver, Model IRLP. It is placed at the remote room
	location to receive IR signals from the handheld remote controller.
	2. One INJ Injector. This unit, located in the remote room, injects the
	remote control signal into the room to- room coaxial cable (along with
	the TV signal) and passes it to the CPL Coupler in the main room. It
	also provides quick connection of the IRLP IR Receiver and 12VDC
	power supply cables.
	3. One CPL Coupler. Located in the main room, this Coupler extracts
	the remote control signal from the coaxial cable and passes it to the
	emitters that control your source equipment.
	4. One Triple Blinking IR Emitter, model 3IREDB. The Emitters on this
	device allow control of three InfraRed remote controlled audio/video
	components. The IR Emitters have a self adhesive film on one surface
	of each Emitter. This allows them to be “stuck” to the IR sensor
	“window” on your source equipment. There is a set of replacement
	adhesive pads included.
	5. A 12VDC Power Supply. This plugs into a 230V~50Hz outlet to
	provide power to the IRLP Receiver.
	6. 3 extra replacement adhesives for the IR Emitters
	–
	Optional:
	IRLCEXPUK
	EXTRA INJ Injector kit for IRLCKUK – IR Link C
	–
	Set content
	1x table top mouse receiver
	1x RF/IR injector
	1x power supply

	*Optional:*
	3IREDB
	Extra 3IREDB Triple Infrared Emitting Diode Blinking/Flash
	Triple infrared emmitting diode blinking. For connecting to CPL
	Coupler to control 3 more sources (total 6 sources).
	–
	The IRED Emitter contains three tiny infrared LED’s* housed in a
	miniature, mouse shaped, black appearing, injection molded plastic
	shell. It emits IR (infrared) control signals sent to it by IR receivers or
	other controllers. The IRED can be installed directly on the IR sensor
	window of the controlled device or other suitable location.
	LED = Light Emitting Diode


	Ebode
	PM28UK
	WIRELESS
	–
	Description
	PowerMid Premium, Extend the signal of your remote control through
	walls and ceilings
	–
	This kit allows you to control remotely any A/V distant appliance, TV,
	VCR, Hi-Fi, satellite and cable box, just by using your existing remote
	control! The remote control signal is transmitted through walls and
	ceilings, up to 100 meters away (open field, about 30 meters through
	walls and ceilings).
	–
	The ebode proprietary eIR2xTM (pronounce Irex) Technology
	guarantees a high level of immunity for infrared noise of direct
	sunlight, CFL lighting and Flat Panel TV’s (including Plasma, LCD and
	LED). Provides accurate reproduction of the latest generation
	Infrared codes that are used in remote controls of, for instance,
	set-top boxes and media players (incl. RC5/6, RCMM, XMP).
	–
	Set Content
	1x Transmitter: converts IR signals of remote controls into 433.92MHz
	RF messages and transmits them to the Receiver, even through walls
	and ceilings
	1x Receiver: converts RF messages back into IR signals to control the
	selected A/V source
	2x Mains power supply wall adapters 230V~50Hz to 9VDC 200mA
	–
	Technical data
	Power: SMPS AC/DC adapter 100-240V~50Hz – 12VDC 200mA (UK)
	Frequency Band: 433.92 MHz
	RF Output Power: 1mW typical @3m
	Operating Range: 100m* (open field). 15-30m* (in building)
	*depending on environmental conditions
	Dimensions: 56 x 40 x 25 mm
	25 mm is height without antenna, height including antenna is 50 mm.
	–
	Optional:
	• ST28UK
	Extra Transmitter for PowerMid Premium (PM28UK)
	Add EXTRA ST28 Transmitters to use your remote controls in several
	rooms
	–
	*Optional:*
	3IREDB
	Extra 3IREDB Triple Infrared Emitting Diode Blinking/Flash
	Triple infrared emmitting diode blinking. For connecting to PM28
	Receiver to control more sources.
	–
	Add a 3IREDB Infrared Extender if you need to place the PowerMid
	Receiver next to your equipment instead of in front of it, or if your
	equipment is located inside a closed cabinet
	–
	The IRED Emitter contains three tiny infrared LED’s* housed in a
	miniature, mouse shaped, black appearing, injection molded plastic
	shell. It emits IR (infrared) control signals sent to it by IR receivers or
	other controllers. The IRED can be installed directly on the IR sensor
	window of the controlled device or other suitable location.
	LED = Light Emitting Diode

Digital Audio to Analog	Converts S/PDIF or TOSLINK digital audio to L/R analogue audio with a digital interpolation filter and digital
Converter	to analogue converter. A perfect solution that supports up to 6 channels (up to 5.1 Surround) of audio
CV30RL	encoded in Dolby Digital with raw audio with auto sample rate of 32, 44.1, 48 KHz and 24-bit incoming
	Bitstream on the left and right channels.
	–
	CV30RL is a digital audio decoder with a special audio DSP, that support PCM and others audio formats.
	–
	Set Contents
	• Digital Audio to Analog Converter
	• Power Supply
	• User Manual

	Planet
	WNRT-627
	–
	300Mbps 802.11n Wireless Broadband Router

	Key Features:
	IEEE Compliant Wireless & Wired LANs
	Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps
	data rate
	Backward compatible with 802.11b/g standard
	Two 5dBi fixed antennas
	Equipped with four LAN ports (10/100Mbps) and one WAN port (10/100Mbps);
	auto MDI/MDI-X supported
	–
	Fixed-Network Broadband Router
	Internet Types: Dynamic IP, Static IP, PPPoE, Telstra Big Pond, L2TP, PPTP
	Supports Static Routing, WDS, UPnP and Dynamic DNS
	–
	Secure Network Connection
	Supports Wi-Fi Protected Setup (WPS)
	Advanced Security: 64/128/152-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
	with TKIP/AES encryption, and 802.1x authentication
	Supports NAT firewall features, with SPI function to protect against DoS attacks
	IP/Protocol-based access control and MAC filtering
	Supports Parental Control to restrict children to access to certain websites
	and the time of surfing the Internet
	–
	Advanced Networking Function for Specific Applications
	Supports multiple sessions like IPSec, L2TP and PPTP VPN pass-through
	Supports virtual server, ALG, DMZ and UPnP for various networking applications
	Supports DHCP server
	Supports IGMP proxy/IGMP snooping for IPTV multicast stream
	–
	Easy Installation and Management
	Web-based UI for quick setup and easy configuration
	Remote management allows configuration from a remote site
	System status monitoring includes DHCP Client and System Log
	Supports PLANET DDNS, Easy DDNS for quick access to Internet servers using
	a domain name
	Easy AP discovery by PLANET Smart Discovery utility

	Planet
	WNRT-633
	–
	300Mbps 802.11n Wireless Gigabit Broadband Router

	Key Features:
	IEEE Compliant Wireless & Wired LANs
	Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps data rate
	Backward compatible with 802.11b/g standard
	Equipped with all Gigabit RJ-45 ports (10/100/1000Mbps) like 1 WAN and 4 LAN ports
	Auto MDI/MDI-X supported
	–
	Fixed-Network Broadband Router
	Supported Internet types: Dynamic IP/ Static IP/ PPPoE/ L2TP/ PPTP
	Supports Static & Dynamic (RIP1 and 2) Routing
	Supports IP / MAC-based Bandwidth Control
	Supports 802.1d STP & IGMP Proxy
	–
	Secure Network Connection
	One-touch Wi-Fi Protected Setup (WPS)
	Advanced security: 64-/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK
	(TKIP/AES encryption) and 802.1x Authentication
	Built-in NAT firewall is featured with Port/ IP/ MAC/ URL Filtering, and DoS protection
	Supports Multiple-SSID to allow users to access different networks through a single AP
	–
	Advanced Networking Function for Specific Applications
	Supports multiple sessions IPSec, L2TP, PPTP, and IPv6 VPN pass-through
	Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking
	applications
	Supports DHCP Server
	–
	Easy Installation and Management
	User Friendly Web-based UI and setup Wizard for easy configuration
	Remote Management allows configuration from a remote site
	System status monitoring includes DHCP Client List and System Log

	Planet
	WDRT-731U
	–
	600Mbps Dual-Band 802.11n Wireless Gigabit Router

	Key Features:
	IEEE Compliant Wireless & Wired LANs
	Compliant with IEEE 802.11a/b/g/n dual band (2.4G & 5G) wireless
	technology capable of up to 300+300Mbps data rate
	Equipped with all Gigabit RJ-45 ports (10/100/1000Mbps) (1 WAN and 4 LAN ports)
	Auto MDI/MDI-X supported
	LAN 4 supports IPTV pass-through enabling you to enjoy online videos
	–
	Fixed-Network Broadband Router
	Supports WAN connection types: Dynamic IP / Static IP / PPPoE / PPTP / L2TP /
	PPPoE Dual Access
	Supports Dynamic DNS and DHCP Server
	–
	Secure Network Connection
	Supports Wi-Fi Protected Setup (WPS)
	Advanced security: 64/128-bit WEP, WPA/WPA2 and WPA-PSK / WPA2-PSK
	(TKIP/AES encryption)
	Supports NAT firewall, IP / Port / URL-based access control and MAC address filtering
	Supports dual-SSID to allow users to access different networks through one single AP
	–
	Advanced Networking Function for Specific Applications
	Supports Bandwidth Control (QoS) based on different local IP addresses
	Supports NTP, Virtual Server, UPnP and DMZ for various networking applications
	Equipped with one USB port for sharing printers and USB mass storages wirelessly
	–
	Easy Installation and Management
	User-friendly Web-based UI with On-line Help
	Remote Management allows configuration from a remote site
	System status monitoring includes DHCP Client List and System Log


	Planet
	FSD-1606
	–
	16-Port 10/100Mbps Fast Ethernet Desktop Switch

	Key Features:
	RJ-45 Interface
	Sixteen 10/100Mbps Fast Ethernet
	Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
	–
	Switching
	Hardware based 10/100Mbps Auto-Negotiation and Auto MDI/MDI-X
	Features Store-and-Forward mode with wire-speed filtering and forwarding rates
	Flow control for Full Duplex operation and back pressure for Half Duplex operation
	Integrates address look-up engine, supporting 4K absolute MAC addresses
	1.625Mb RAM for Packet Buffer
	Switching Fabric: 3.2Gbps, Switch Throughput: 2.38Mpps
	Automatic address learning and address aging
	Complies with CSMA/CD protocol
	–
	Hardware
	Made from Plastic desktop size, wall mount design
	LED indicators for system power, per port Link / Act
	Supports to handle up to 1522bytes packet size
	External 9V DC, 1A Power Adapter
	FCC Class B, CE compliant

	Planet
	FNSW-1601
	–
	16-Port 10/100Mbps Fast Ethernet Rackmount Switch

	Key Features:
	Physical Port
	16 10/100Mbps Fast Ethernet ports
	Supports auto MDI/MDI-X function
	–
	Layer 2 Features
	Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX Ethernet standards
	Supports powerful Green Ethernet to power saving
	Features Store-and-Forward mode with wire-speed filtering and forwarding rates
	Handles up to 1522 bytes packet size
	Complies with IEEE 802.3x flow control for full duplex operation and back pressure
	for half duplex operation
	Integrated address look-up engine, supports 8K absolute MAC addresses
	Automatic address learning and address aging
	Supports CSMA/CD protocol
	–
	Hardware Features
	100~240V AC, 50~60Hz, 0.3A universal power input
	FCC, CE class A compliant

	Planet
	FNSW-2401
	–
	24-Port 10/100Mbps Fast Ethernet Rackmount Switch

	Key Features:
	Physical Port
	• 24 10/100Mbps Fast Ethernet ports
	• Supports auto MDI/MDI-X function
	–
	Layer 2 Features
	• Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX Ethernet standard
	• Supports powerful Green Ethernet to power saving
	• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
	• Handles up to 1522 bytes packet size
	• Complies with IEEE 802.3x flow control for full duplex operation and back pressure
	for half duplex operation
	• Integrated address look-up engine, support 8K absolute MAC addresses
	• Automatic address learning and address aging
	• Support CSMA/CD protocol
	–
	Hardware Features
	• 100~240V AC, 50~60Hz, 0.3A universal Power input
	• FCC, CE class A compliant

	Planet
	GSD-1603
	–
	16-Port 10/100/1000BASE-T Desktop Gigabit Ethernet Desktop Switch, Metal
	(External Power)

	Key Features:
	Physical Port
	16 10/100/1000BASE-T Gigabit Ethernet ports
	Supports auto MDI/MDI-X function
	–
	Layer 2 Features
	Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab
	1000BASE-T Ethernet standards
	Features Store-and-Forward mode with wire-speed filtering and forwarding rates
	Integrated address look-up engine, supporting 8K absolute MAC addresses
	9K jumbo packet support
	IEEE 802.1Q VLAN packet transparent support
	IEEE 802.3x flow control for full duplex operation and backpressure for half duplex
	operation
	Hardware based 10/100BASE-TX, half/full duplex and 1000BASE-T full duplex mode,
	flow control and auto-negotiation
	Automatic address learning and address aging
	Supports CSMA/CD protocol
	–
	Hardware Features
	Made of metal, desktop size and wall-mount design
	LED indicators for system power, per port Link/Act
	12V DC, 1A external power adapter
	FCC, CE Class B compliant

	Planet
	GSW-1601
	–

	Key Features:
	• Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab
	1000Base-T Ethernet standard
	• 16 10/100/1000Mbps Gigabit Ethernet ports
	• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
	• Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode,
	flow control and auto-negotiation
	• IEEE 802.3x flow control for full duplex operation and backpressure for half duplex
	operation
	• Integrated address look-up engine, supports 8K absolute MAC addresses
	• 9K Jumbo packet support
	• Automatic address learning and address aging
	• Supports Auto MDI/MDI-X function
	• Supports CSMA/CD protocol
	•100-240V AC, 0.6A, 50/60Hz universal power input
	• FCC, CE class A compliant

	Planet
	GSW-2401
	–
	24-Port 10/100/1000Mbps Gigabit Ethernet Rackmount Switch

	Key Features:
	• Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab
	1000Base-T Ethernet standard
	• 16 10/100/1000Mbps Gigabit Ethernet ports
	• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
	• Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode,
	flow control and auto-negotiation
	• IEEE 802.3x flow control for full duplex operation and backpressure for half duplex
	operation
	• Integrated address look-up engine, supports 8K absolute MAC addresses
	• 9K Jumbo packet support
	• Automatic address learning and address aging
	• Supports Auto MDI/MDI-X function
	• Supports CSMA/CD protocol
	•100-240V AC, 0.6A, 50/60Hz universal power input
	• FCC, CE class A compliant

	Planet
	ANT-OM9
	–
	2.4GHz 9dBI Omni Directional Antenna / Indoor / ABS / RP-SMA male / 11b/g/n

	Key Features:
	Compatible with 2.4GHz 802.11n devices
	Optimal 9dBi high gain, capable of eliminating wireless dead spots
	Flexible RP-SMA plug (male) connector type fits all wireless equipment with an
	RP-SMA Jack (female) antenna connector
	Adjustable 90-degree tilted axis for best wireless transmission
	360 degrees of wireless network coverage, no aiming required
	High-quality, elegant and stylish design
	No configuration or installation software required
	—-

Ceiling-mount Wireless Access Point
	–
	Planet
	WNAP-C3220A
	–
	300Mbps 802.11n Ceiling-mount Wireless Access Point

	Key Features:
	Wireless Standard Compliance
	Compliant with IEEE 802.11n wireless technology with data rate of up to 300Mbps
	Backward compatible with 802.11b/g standard
	Supports IEEE 802.3af standard-based PoE or local AC power
	Built-in 2T2R, 3dbi antenna
	–
	Secure Network Connection
	Advanced security: 64-/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK
	(TKIP/AES encryption), 802.1x
	Supports wireless MAC address filtering control to limit the connected wireless clients
	–
	Comprehensive Wireless Advanced Features
	Multiple operation modes including AP (Multi-SSIDs), Client, Repeater/
	Universal Repeater, WDS Point-to-Point (PtP) and WDS Point-to-Multipoint (PtMP)
	Up to 5 multiple-SSIDs to allow users to access different networks through a single AP
	Supports WMM (Wi-Fi Multimedia) and wireless QoS to enhance the efficiency of
	multimedia application
	Supports IAPP (Inter Access Point Protocol) wireless roaming to enable clients to roam
	across multiple Aps
	Provides 5-level Transmitting Power Control to adapt various environments
	Wireless schedule allows administrators to enforce time-based internet access
	Self-healing (Schedule Reboot) mechanism for reliable connectio
	–
	Easy Deployment & Centralized Management
	Supports AP controller to enable administrator to configure and monitor multiple APs
	simultaneously
	Flexible deployment with standard 802.3af PoE/ PD supported
	Sleek, ceiling-mountable design and position LED help to locate multiple APs with ease
	Step-by-step configuration with intelligent setup wizard and graphical
	Web-based UI
	Supports SNMP-based management interface
	System status monitoring including associated client list and system log

	Planet
	WDAP-C7400
	–
	900Mbps Dual Band Ceiling Mount Wireless Access Point

	Key Features:
	Standard Compliant Hardware Interface
	Complies with IEEE 802.11a/b/g/n Wireless LAN speed up to 900Mbps
	2 x 10/100/1000Base-T Ports with 1-port PoE (PD, Powered Device)
	IEEE Standard 802.3at Power Over Ethernet Design
	–
	RF Interface Characteristics
	• 2.4GHz+5GHz Dual Band concurrent, more efficient in carrying high load traffic
	• 3T3R MIMO technology for enhanced throughput and coverage
	• Built-in 4.5dBi dual-band antenna x 3
	• High Output Power up to 500mW with multiple adjustable transmit power control
	• High Speed up to 900Mbps (450+450Mbps Transmit/Receive) data rate
	–
	Secure Network Connection
	Advanced security: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK
	(TKIP/AES encryption) and RADIUS authentication
	Supports MAC address filtering
	–
	Easy Deployment & Centralized Management
	Stylish ceiling mount design
	User friendly Web-based UI
	SNMP-based management interface
	Centralized Management Utility allows administrator to monitor and configure

In-Wall Wireless Access Point
	–
	Planet
	WNAP-W2201A
	–
	300Mbps 802.11n In-Wall Wireless Access Point (EU Type) 86×86 mm

	Key Features:
	Standard Compliant Hardware Interface
	Compliant with IEEE 802.11n wireless technology with data rate of up to 300Mbps
	One 10/100BASE-TX port and one PoE powered device (PD) port
	One RJ11 port for phone line connection
	European 86-type wall outlet
	Built-in 3dBi antenna x 2
	–
	Secure Network Connection
	Advanced security: 64-/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK
	(TKIP/AES encryption), 802.1x
	Supports wireless MAC address filtering control to limit the connected wireless clients
	–
	Comprehensive Wireless Advanced Features
	Multiple operation modes including AP (Multi-SSIDs), Client, Repeater/
	Universal Repeater, WDS Point-to-Point (PtP) and WDS Point-to-Multipoint (PtMP)
	Up to 5 multiple-SSIDs to allow users to access different networks through a single AP
	Supports WMM (Wi-Fi Multimedia) and wireless QoS to enhance the efficiency of
	multimedia application
	Supports IAPP (Inter Access Point Protocol) wireless roaming to enable clients to roam
	across multiple Aps
	Provides 5-level Transmit Power Control to adapt various environments
	Wireless schedule allows administrators to enforce time-based internet access
	Self-healing (Schedule Reboot) mechanism for reliable connection
	–
	Easy Deployment & Centralized Management
	Supports AP controller to enable administrator to configure and monitor multiple APs
	simultaneously
	Flexible deployment with standard 802.3af/at PoE/PD supported
	Stylish in-wall design perfectly matches the room decoration
	Step-by-step configuration with intelligent setup wizard and graphical
	Web-based UI
	Supports SNMP-based management interface
	System status monitoring including associated client list and system log


10/100Mbps 802.3af/at PoE Switch
	–
	Planet
	FSD-504HP – Fast PoE Switch AF/AT 60W
	–
	4-Port 10/100Mbps 802.3af/at PoE + 1-Port 10/100Mbps Desktop Switch (60 Watts)

	Key Features:
	RJ45 Interface
	Five 10/100Mbps Fast Ethernet ports
	4 ports support 51V DC power to PoE powered device
	–
	Power over Ethernet
	Complies with IEEE 802.3af/at Power over Ethernet end-span + mid-span PSE
	Up to 4 IEEE 802.3af/2 IEEE 802.3at devices powered
	Supports PoE power up to 30 watts for each PoE port
	60-watt PoE budget
	Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend”
	mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and
	VLAN isolation
	Auto detects powered device (PD)
	Circuit protection prevents power interference between ports
	Remote power feeding up to 100m in the standard mode
	–
	Switching
	Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X
	Flow control for full duplex operation and back pressure for half duplex operation
	1536bytes packet size support
	Integrates address look-up engine, supporting 1K absolute MAC addresses
	Automatic address learning and address aging
	Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
	–
	Hardware
	Desktop palm size
	LED indicators for PoE ready/activity and LINK/ACT
	One 51V DC power jack

10/100/1000Mbps 802.3af/at PoE Switch
	–
	Planet
	GSD-604HP – Gigabit Switch AF/AT 55W
	–
	4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Desktop Switch
	(External 55 Watts)

	Key Features:
	RJ45 Interface
	6 10/100/1000Mbps Gigabit Ethernet ports
	4 ports support 54V DC power to PoE powered device
	–
	Power over Ethernet
	Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
	Up to 4 IEEE 802.3af/at devices powered
	Supports PoE power up to 30 watts for each PoE port
	55-watt PoE budget
	Auto detects powered device (PD)
	Circuit protection prevents power interference between ports
	Remote power feeding up to 100m
	–
	Switching
	Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
	Flow control for full duplex operation and back pressure for half duplex operation
	9216 bytes jumbo packet size support
	Integrates address look-up engine, supporting 8K absolute MAC addresses
	Automatic address learning and address agin
	Supports port-based VLAN and loop protection
	–
	Hardware
	LED indicators for PoE ready and LINK/ACT
	One 55V DC power jack

	Planet
	GSD-908HP – Gigabit Switch AF/AT 120W
	–
	8-Port 10/100/1000T 802.3at PoE + 1-Port Gigabit Desktop Switch (120 Watts)

	Key Features:
	RJ-45 Interface
	Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab
	1000Base-T
	9-Port 10/100/1000Mbps Gigabit Ethernet Switch
	8-Port supports 51V DC power to PoE Powered Device (Port 1 to port 8)
	–
	Power over Ethernet
	Complies with IEEE 802.3af / 802.3at Power over Ethernet End-Span PSE
	120-watt PoE budget
	Up to 8 IEEE 802.3af devices powered
	Supports PoE Power up to 15.4 watts for each PoE port
	Up to 4 IEEE 802.3at devices powered
	Supports PoE Power up to 30 watts for each PoE port
	Auto detects powered device (PD)
	Circuit protection prevents power interference between ports
	Remote power feeding up to 100m
	–
	Switching
	Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode,
	flow control and auto-negotiation and auto MDI/MDI-X
	Features Store-and-Forward mode with wire-speed filtering and forwarding rates
	IEEE 802.3x flow control for full duplex operation and back pressure for half duplex
	operation
	Integrates address look-up engine, supporting 4K absolute MAC addresses
	192 KB packet buffer
	9K Jumbo frame supports at 1000Mbps duplex mode
	Automatic address learning and address aging
	Supports CSMA/CD protocol
	–
	Hardware
	Made of metal, desktop size and wall-mount design
	LED indicators for system power, PoE usage 100%, per port PoE In-Use (Port 1
	to port 8), per port Link / Act (10/100/1000Mbps, port 1 to port 9)
	51V DC, 2.5A external power adapter
	FCC, CE Class A compliant

Infomir
MAG254

	MAG254 is a unique open platform. You can make
	changes to the Set-Top Box software as well as
	integrate with other developers’ software.
	–
	MAG 254 is a powerful Set-Top Box with efficient
	processor STiH207 and increased RAM memory, and it
	is an optimal solution for IPTV/OTT projects.
	The Set-Top Box is designed to fulfill business projects of
	internet providers, OTT operators and content
	aggregators. The increased productivity of MAG 254
	enables to use resource-intensive interactive applications
	and support 3D-video.
	–
	STiH207 650Mhz, Linux 2.6.23, Composite AV, –HDMI 1.4,
	USB x 2, S/PDIF, LAN, WiFi Ready
	–