Multiswitches and Accessories

MULTISWITCHES

MS SERIES – 4 cable system, Amplifier
	TERRA
	SA412
	–
	4 path equalized line amplifier of SAT IF signals
	For compensation of through losses of multiswitches and interconnection cables in
	4 cable distribution system
	Extremely low power consumption
	Fixed 4 dB slope precorrection
	In line powering from H lines
	DC pass through H & V lines
	Frequency range: 950-2400 MHz
	Gain: 13 – 17 dB
	Maximal output level, IMD3=35 dB (EN 50083-3): 106 dBμV
	External DC feeding: + 18 V & 1 A max.

MS SERIES – 4 cable system, Cascadable multiswitches
	TERRA
	MS408G12
	–
	Through line 4×8 multiswitches
	Cascadable distribution system of 4 SAT polarities for floor by floor installation
	and star distribution
	DC pass from receiver to all SAT lines
	Economical power using concept – no DC power consumption from line; subscriber
	line is powered from a corresponding receiver
	To make easier level equalization in distribution network, several types of
	multiswitches with different tap gain are produced
	Frequency range: 950-2400 MHz
	Maximal output level IMD3=35 dB(EN50083-3): 93 dBμV
	–
	MS408G12 Tap gain: 12 dB

MS, MR, MSR, MV, MSV SERIES – 5 cable system, Amplifier
	TERRA
	SA51
	SA51D or SA511
	–
	Launch and line amplifiers
	For compensation of through losses of multiswitches and interconnection cables in
	5 cable distribution systems
	Cascadable with 5 cable system components: taps, splitters and multiswitches
	Signal level control at all inputs
	Built-in adjustable equalizer and push-pull amplifier on terrestrial TV line
	Fixed 7 dB slope precorrection on SAT IF lines
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 47-790 MHz
	Output level IMD3=35 dB (EN50083-3) SAT IF: 114 dBμV
	Output level IMD3=60 dB(DIN45004B) Terr. TV: 109 dBμV
	Gain SAT IF, adjustable: 22 dB (0 ÷ -15 dB) by 1 dB step
	Gain Terr. TV, adjustable: 22 dB (0 ÷ -15 dB) by 1 dB step
	–
	SA51 or SA501: launch amplifier for amplifying of 4 SAT IF and terrestrial TV signals;
	built-in switch-mode power supply allows to feed: 18 V DC via H inputs and 14 V
	DC via V inputs to up lines; 18 V DC (switchable) via H outputs and 14 V DC via V
	outputs to down lines; 12 V DC via Terr. TV input (switchable)
	–
	SA51D or SA511: line amplifier for amplifying of 4 SAT IF and terrestrial TV signals;
	in line powering through H lines; switchable DC pass through H and V lines;
	switchable 12 V feeding via Terr. TV input; remote powering voltage indication

MS SERIES – 5 cable system, Cascadable multiswitches
	TERRA
	MS553
	MS554
	–
	Cascadable distribution system of 4 SAT polarities and terrestrial TV for floor by
	floor installation and/or star distribution
	Possibility to supply DC for LNBs through end line multiswitch MS554
	Economical power using consept – no DC power consumption from line
	Passive terrestrial TV path allows to receive terrestrial TV programs without
	switching on SAT TV receiver
	Depending on interconnection cable up to 5 multiswitches can be connected into
	cascade without compensating amplifier
	Ready for return path operation
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 5-862 MHz
	Maximal output level for SAT IF circuit, IMD3=35 dB (EN50083-3): 93 dBμV
	Tap gain SAT IF: 2 dB
	Tap gain Terr. TV: – 19 dB
	–
	MS553: through line 5×4 multiswitch
	MS554: end line 5×4 multiswitch feeds DC to all SAT IF incoming lines

MR SERIES – 5 cable system, Radial multiswitches
	TERRA
	MR508
	MR512
	MR516
	MR524
	–
	For star distribution system of 4 SAT IF polarities and terrestrial TV signal
	Built-in power supply for remote DC feeding
	Possibility to feed preamplifier through terrestrial TV input
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 47-790 MHz
	Output level for SAT IF (IMD3=35 dB): 96 dBμV
	–
	MR508: 5×8 outputs multiswitch
	–
	MR512: 5×12 outputs multiswitch
	–
	MR516: 5×16 outputs multiswitch
	–
	MR524: 5×24 outputs multiswitch






MSV SERIES – 5 cable system, Remotely powered multiswitches
	TERRA
	MSV512
	MSV516
	–
	For large installations of SAT IF distribution systems
	In line powering through H lines
	All components of 5 cable distribution system are compatible to each other
	Length of the subscriber line up to 80 meters
	Two gain regulators for SAT IF and separate regulators for terrestrial TV
	Optimized for operation with terrestrial digital/analog signals
	Active terrestrial TV path is powered from central power supply allows to receive
	terrestrial TV programs without switching on SAT TV receiver
	LED indication of 18 V line powering
	Possibility to supply powering for LNBs and network equipment from external +18V
	power supply unit: recommended power supply – SA125A
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 47-862 MHz
	Output level for SAT IF (IMD3=35 dB): 93 dBμV
	–
	MSV512: 5×12 outputs multiswitch
	MSV516: 5×16 outputs multiswitch

MV SERIES – 5 cable system, Remotely powered multiswitches
	TERRA
	MV508
	–
	For large installations of SAT IF distribution systems
	In line powering through H lines
	All components of 5 cable distribution system are compatible to each other
	Length of the subscriber line up to 80 meters
	Four positions discrete gain regulator for each SAT IF line and separate 16
	positions discrete gain regulator for terrestrial TV
	Optimized for operation with terrestrial digital/analog signals
	Active terrestrial TV path is powered from central power supply allows to receive
	terrestrial TV programs without switching on SAT TV receiver
	LED indication of 18 V line powering
	Possibility to supply powering for LNBs and network equipment from external +18V
	power supply unit: recommended power supply – PS182F
	Die-cast housing providing high screening efficiency
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 47-862 MHz
	Output level for SAT IF (IMD3=35 dB): 105 dBμV
	–
	MV508: 5×8 outputs multiswitch

MS, MR, MSR, MSV SERIES – 9 cable system, Amplifier
	TERRA
	SA901
	SA911
	–
	Launch and line amplifiers
	For compensation of through losses of multiswitches and interconnection cables in 9
	cable distribution systems
	Cascadable with multiswitches MS951, MS952 and other 9 cable system components
	Signal level control at all inputs
	Built-in adjustable equalizer and push-pull amplifier on terrestrial TV line
	Fixed 7 dB slope precorrection on SAT IF lines
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 47-862 MHz
	Output level IMD3=35 dB (EN50083-3) SAT IF: 114 dBμV
	Output level IMD3=60 dB (DIN45004B) Terr. TV: 112 dBμV
	Gain SAT IF, adjustable: 15-22 dB
	Gain Terr. TV, adjustable: 17 dB
	–
	SA901: launch amplifier for amplifying of 8 SAT IF and terrestrial TV signals;
	built-in switch-mode power supply allows to feed: 18 V DC via H inputs and 14 V
	DC via V inputs to up lines; switchable 18 V DC via H outputs to down lines;
	12 V DC via Terr. TV input (switchable)
	–
	SA911: line amplifier for amplifying of 8 SAT IF and terrestrial TV signals;
	in line powering through H lines; DC pass through H and V lines
	(switchable through H lines); 12 V feeding via Terr. TV input (switchable)

MS SERIES – 9 cable system, Cascadable multiswitches
	TERRA
	MS951
	MS952
	–
	Cascadable distribution system of 8 SAT polarities and terrestrial TV for floor by
	floor installation and/or star distribution
	Economical power using concept – no DC power consumption from line;
	subscriber line is powered from a corresponding receiver
	Possibility to supply DC for LNBs through end line multiswitch MS952 as well as
	multipath launch amplifier SA901
	Passive terrestrial TV path allows to receive terrestrial TV programs without
	switching on SAT TV receiver
	Depending on interconnection cable up to 5 multiswitches can be connected into
	cascade without using a compensation amplifier
	Ready for return path operation
	High isolation between all outputs
	Recommended power supply – SA125A
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 5-862 MHz
	Maximal output level for SAT IF circuit, IMD3=30 dB (EN50083-3): 93 dBμV
	Tap gain SAT IF: 3 dB
	Tap gain Terr. TV: – 19 dB
	–
	MS951: through line 9×4 multiswitch
	MS952: end line 9×4 multiswitch

MSR SERIES – 9 cable system, Radial multiswitches
	TERRA
	MSR912
	MSR916
	MSR924
	–
	Star distribution system of 8 SAT IF polarities and terrestrial TV signal
	Built-in power supply for remote DC feeding
	Possibility to feed DC for preamplifier through terrestrial TV input
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 47-862 MHz
	Output level for SAT IF (IMD3=35 dB): 93 dBμV
	–
	MSR912: 9×12 outputs multiswitch
	MSR916: 9×16 outputs multiswitch
	MSR924: 9×24 outputs multiswitch

MR SERIES – 9 cable system, Radial multiswitches
	TERRA
	MR908L
	–
	Star distribution system of 8 SAT IF polarities and terrestrial TV signal
	integrated LTE signal suppression filter
	Built-in power supply for remote DC feeding for LNBs
	Possibility to feed DC for preamplifier through terrestrial TV input
	Gain regulators for every SAT IF input and separate 1 dB step regulator for
	terrestrial TV
	Passive and active Terr.TV path
	Die-cast housing providing high screening efficiency
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: active 47-790 MHz; passive 5-862 MHz
	Output level for SAT IF (IMD3=35 dB): 93 dBμV
	–
	MR908L: 9×8 outputs multiswitch

MSV SERIES – 9 cable system, Remotely powered multiswitches
	TERRA
	MSV908
	MSV912
	MSV916
	–
	For large installations of SAT IF distribution systems
	In line powering through H lines
	Length of the subscriber line up to 80 metres
	4 gain regulators for SAT IF and separate regulator for terrestrial TV
	Optimized for operation with terrestrial digital/analog signals
	Active terrestrial TV path is powered from central power supply allows to receive
	terrestrial TV programs without switching on SAT TV receiver
	LED indication of 18 V line powering
	Possibility to supply powering for LNBs equipment from external +18V power
	supply unit: recommended power supply – SA125A
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 47-862 MHz
	Output level for SAT IF (IMD3=35 dB): 93 dBμV
	––
	MSV908: 9×8 outputs multiswitch
	MSV912: 9×12 outputs multiswitch
	MSV916: 9×16 outputs multiswitch

MS SERIES – 17 cable system, Cascadable multiswitches
	TERRA
	MS1751
	MS1752
	–
	Cascadable distribution system of 16 SAT polarities and terrestrial TV for floor by
	floor installation and/or star distribution
	Economical power using concept – no DC power consumption from line;
	subscriber line is powered from a corresponding receiver
	Possibility to supply DC for LNBs through end line multiswitch MS1752
	Passive terrestrial TV path allows to receive terrestrial TV programs without
	switching on SAT TV receiver
	Depending on interconnection cable up to 5 multiswitches can be connected into
	cascade without using a compensation amplifier
	Ready for return path operation
	High isolation between all outputs
	Recommended power supply – SA125A
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 5-862 MHz
	Maximal output level for SAT IF circuit, IMD3=30 dB (EN50083-3): 90 dBμV
	Tap gain SAT IF: 1 dB
	Tap gain Terr. TV: – 20 dB
	–
	MS1751: through line 17×4 multiswitch
	MS1752: end line 17×4 multiswitch

	TERRA
	MS1708
	–
	Cascadable distribution system of 16 SAT polarities and terrestrial TV for floor by
	floor installation and/or star distribution
	Through line 17×8 multiswitch
	Separate SAT IF gain adjustment for every pair of subscribers outputs
	DC through path and multiswitch feeding from SAT A HLo, SAT A HHi lines
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 5-862 MHz
	Maximal output level for SAT IF circuit, IMD3=35 dB: 100 dBμV
	–
	–

MSR SERIES – 17 cable system, Radial multiswitches
	TERRA
	MSR1708
	MSR1716
	–
	Star distribution system of 16 SAT IF polarities and terrestrial TV signal
	Separate SAT IF gain adjustment for every pair of subscribers outputs
	Built-in power supply with possibility of remote DC feeding for LNBs and other
	network components
	Power supply has short-circuit and overload protection with LED indicators
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 47-862 MHz
	Output level for SAT IF (IMD3=35 dB): 100 dBμV
	–
	MSR1708: 17×8 outputs multiswitch
	MSR1716: 17×16 outputs multiswitch

SMK, SMS SERIES – 9 cable system, Amplifier
	SPAUN
	SBK9965NF
	–
	Power Launch Amplifiers for large distribution networks
	Used only in combination with SMK 99xxx F or SMS 99xxxF multiswitches
	–
	Features:
	Integrated energy-saving switch mode power supply U~: 100 … 240 V / 50 … 60 Hz
	–
	Terrestrial:
	CATV compatible
	Push pull technology
	Level adjuster range: 0 … -15 dB
	Return path: Selectable: off, passive, active. Gain selectable: 20, 15, 10 or 5 dB
	Forward path: Terrestrial amplifier with pre emphasis
	–
	SAT-IF:
	An special amplifier / filter design improves the intermodulation properties of the
	launch amplifiers considerably
	The high selective input filter guarantees that interference products of the LNBs
	cannot drive the amplifiers into saturation
	A additional output filter ensures that intermodulation products and noise effects do
	not degrade the terrestrial signal
	–
	Frequency range SAT IF: 950-2200 MHz
	Frequency range Terr. TV: 85-862 MHz
	Maximum output level IMA3=35 dB (EN50083-3) SAT IF: 117 dBμV
	Maximum output level IMA3=60 dB (EN50083-3) Terr. TV: 116 dBμV
	Gain SAT IF, adjustable: 27-31 dB
	Gain Terr. TV, adjustable: 26-31 dB

SMK SERIES – 9 cable system, Cascadable multiswitches
	SPAUN
	SMK9969F
	SMK99169F
	–
	Cascadable distribution system of 8 SAT polarities and terrestrial TV for floor by
	floor installation and/or star distribution
	Standby function (trunkline 1)
	IF selection logic: Using the analogue control signals 14/18 V, 0/22 kHz and
	ToneBurst or the DiSEqC commands Polarity, Band and Position
	Frequency range SAT IF: 950-2200 MHz
	Frequency range Terr. TV: 5-862 MHz
	–
	SMK9969F: through line 9×6 multiswitch
	Tap loss SAT IF: 15-18 dB
	Tap loss Terr. TV: 18-21 dB
	–
	SMK99169F: through line 9×16 multiswitch
	Tap loss SAT IF: 16-20 dB
	Tap loss Terr. TV: 22-25 dB

	SPAUN
	SMS9982NF
	–
	PREMIUM CLASS
	Cascadable distribution system of 8 SAT polarities and terrestrial TV for floor by
	floor installation and/or star distribution
	With adjustable SAT output level for 8 subscribers
	–
	SAT-IF:
	The multiswitches support a standby mode. The
	SAT- IF amplifiers and the LNB remote voltage are only active when at least one
	receiver feeds a remote voltage to its multiswitch outlet
	The multiswitches support DiSEqC 2.0. Bidirectional communication between
	receiver and multiswitch is possible
	9 isolated termination resistors are shipped with the multiswitches to terminate the
	trunklines
	SAT-IF amplifiers precompensating 4 dB slope
	IF selection logic: Using the analogue control signals 14/18 V, 0/22 kHz and
	ToneBurst or the DiSEqC commands Polarity, Band and Position
	Using the mode selector available for each receiver to swap
	Frequency range SAT IF: 950-2200 MHz
	Frequency range Terr. TV: 47-862 MHz
	Maximum output level IMA3=35 dB (EN50083-3) SAT IF: 109 dBμV
	Maximum output level IMA3=60 dB (EN50083-3) Terr. TV: 105 dBμV
	Gain Trunklines SAT IF, adjustable: 13-17 dB
	Gain Trunklines Terr. TV, adjustable: 18 dB
	Tap gain SAT IF: -2.5-6.5 dB
	Tap gain Terr. TV: 0.5-3.5 dB

ACCESSORIES

SAT-IF LINE AMPLIFIER
	GECEN
	A0420
	Remote power SAT-IF line amplifier
	DC and tone through pass
	Zinc die-cast housing, nickel-plated
	Frequency range: 900-2150 MHz
	Power supply: 15 +/- 3V DC
	Power supplied from satellite receiver through coaxial cable
	DC power passing: 500mA (MAX)
	Perfect to compensate loss of long LNB downlead cables
	F jack / F connector for direct connection
	Gain 20dB

	TERRA
	SA001
	Remote power SAT-IF line amplifier
	Perfect to compensate loss of long LNB downlead cables
	DC and tone through pass
	Gain 22dB

	TERRA
	SA002
	Remote power SAT-IF line amplifier
	DC and tone through pass
	For outdoor mounting
	Power supplied from satellite receiver through coaxial cable
	Perfect to compensate loss of long LNB downlead cables
	F jack / F connector for direct connection
	Gain 10dB

	TERRA
	SA003
	Remote power SAT-IF line amplifier
	DC and tone through pass
	Power supplied from satellite receiver through coaxial cable
	Perfect to compensate loss of long LNB downlead cables
	F jack / F connector for direct connection
	SAT Frequency range: 950-2400 MHz, Gain 22dB
	Maximal output level IMD3=35 dB (EN50083-3): 118 dBμV
	Integrated LTE signal suppression filter, Frequency range: 47-790 MHz, Gain -3dB

SAT Slope Equalizer
	SPAUN
	SLR2200F
	SAT Slope Equalizer
	To compensate the slope of distribution networks
	Frequency range: 950-2200 MHz
	Slope control / variation range: 0 to -12 dB
	Slope equalizer will be used in distribution networks where long cable runs
	cause a higher through loss in the upper frequency range
	Slope equalizer compensate this higher through loss by having a higher loss
	in the lower frequency range compared to the upper frequency range
	F jack to F plug / F connector

	SPAUN
	SLE4420/6F
	SAT Slope Equalizer
	To compensate the slope of distribution networks
	Frequency range: 950-2200 MHz
	Slope control (fixed value): -6 dB
	Slope equalizer will be used in distribution networks where long cable runs
	cause a higher through loss in the upper frequency range
	Slope equalizer compensate this higher through loss by having a higher loss
	in the lower frequency range compared to the upper frequency range
	F jacks to F quick plugs / F connector

DIPLEXER
	TERRA
	DC004
	–
	Diplexer for combining of
	VHF and UHF Terr. signals

	TERRA
	DC009
	–
	Diplexer for combining of
	SAT IF & Terr. signals

	TERRA
	DC010
	–
	Diplexer for combining of
	SAT IF & Terr. signals
	For outdoor mounting

	SPAUN
	SEW121F
	–
	Diplexer for combining of
	SAT IF & Terr. signals
	Option: Waterproof cover WSG94

Polarity/band switch
	TERRA
	PI010
	–
	For insertion 14 V/18 V / 0/22 kHz control signal
	Powered from line or external 18 V power supply
	Frequency range: 950-2400 MH
	Gain: – 1 dB
	DC pass: 0.3 A max.

Active SAT IF splitters
	TERRA
	SS001
	–
	2 way active splitter
	DC and tone through pass
	High outputs isolation
	Frequency range: 950-2400 MHz
	Gain: -1-3 dB
	Maximal output level IMD3=35 dB (EN50083-3): 94 dBμV

	TERRA
	SS002
	–
	4 way active splitter
	DC and tone through pass
	High outputs isolation
	Frequency range: 950-2400 MHz
	Gain: -1-3 dB
	Maximal output level IMD3=35 dB (EN50083-3): 94 dBμV

	TERRA
	SS003
	–
	6 way active splitter
	DC and tone through pass
	High outputs isolation
	Frequency range: 950-2400 MHz
	Gain: -1-3 dB
	Maximal output level IMD3=35 dB (EN50083-3): 94 dBμV

5 cable system Taps and splitters
	TERRA
	SD504 or SS504
	SS510
	SD515 or SS515
	–
	2 way splitter and one way taps of 4 SAT+1 terrestrial signals
	Low losses
	DC pass through SAT and terrestrial TV trunk lines
	Switchable DC pass to tap H outputs
	Accepts central pin ∅ 1.2 mm max
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 5-862 MHz
	–
	SD504 or SS504: 2 way splitter
	Through loss SAT IF: 4 dB
	Through loss Terr. TV: 4 dB
	Tap loss SAT IF: 4 dB
	Tap loss Terr. TV: 4 dB
	–
	SS510: 1 way 10 dB tap
	Through loss SAT IF: 1.5 dB
	Through loss Terr. TV: 1.5 dB
	Tap loss SAT IF: 8-12 dB
	Tap loss Terr. TV: 10 dB
	–
	SD515 or SS515: 1 way 15 dB tap
	Through loss SAT IF: 1.1 dB
	Through loss Terr. TV: 1.3 dB
	Tap loss SAT IF: 13-17 dB
	Tap loss Terr. TV: 15-16 dB

	TERRA
	SSQ508
	–
	4 way splitter of 4 SAT+1 terrestrial TV signals
	Switchable DC pass to tap H outputs
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 5-862 MHz
	Through loss SAT IF: 8 dB
	Through loss Terr. TV: 8 dB
	–
	–
	–
	–

9 cable system Taps and splitters
	TERRA
	SS904
	SS910
	SS915
	–
	2 way splitter and one way taps of 8 SAT+1 terrestrial signals
	Low losses
	Switchable DC pass to tap H outputs
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 5-862 MHz
	–
	SS904: 2 way splitter
	Through loss SAT IF: 4 dB
	Through loss Terr. TV: 4 dB
	Tap loss SAT IF: 4 dB
	Tap loss Terr. TV: 4 dB
	–
	SS910: 1 way 10 dB tap
	Through loss SAT IF: 1.7 dB
	Through loss Terr. TV: 1.6 dB
	Tap loss SAT IF: 8-12 dB
	Tap loss Terr. TV: 10 dB
	–
	SS915: 1 way 15 dB tap
	Through loss SAT IF: 1.2 dB
	Through loss Terr. TV: 1.2 dB
	Tap loss SAT IF: 13-17 dB
	Tap loss Terr. TV: 15 dB

	TERRA
	SSQ908
	–
	4 way splitter of 8 SAT+1 terrestrial TV signals
	Switchable DC pass to tap H outputs
	Frequency range SAT IF: 950-2400 MHz
	Frequency range Terr. TV: 5-862 MHz
	Through loss SAT IF: 8 dB
	Through loss Terr. TV: 8 dB
	–
	–
	–
	–

	SPAUN
	AZR9990/10F
	–
	One way tap of 8 SAT+1 terrestrial signals
	With the structure of digital compatible distributed networks with several supplying
	lines these devices reduces the installation expenditure substantially
	The terrestrial line is return path compatible
	The trunk line DC path is linked to the tap outlet
	Frequency range SAT IF: 950-2200 MHz
	Frequency range Terr. TV: 5-862 MHz
	Through loss SAT IF: 1-2.5 dB
	Through loss Terr. TV: 3.5 dB
	Tap loss SAT IF: 10-14 dB
	Tap loss Terr. TV: 11 dB

Power Supply
	TERRA
	SA125A
	–
	High efficiency 18 V & 1.3 A switch-mode power supply
	DC output: +18 V/1.3 A
	Output DC connector: F male
	Mains voltage: 180 V÷ 240 V~ 50 Hz
	Dimensions: 86x53x35.5 mm

	TERRA
	PS182F
	–
	High efficiency 18 V & 2 A switch-mode power supply
	DC output: +18 V/2 A
	Output DC connector: F male
	Mains voltage: 180 V÷ 240 V~ 50 Hz
	Dimensions: 78x130x33 mm

	TERRA
	ZS12-250F
	–
	Stabilized power supply with power inserter, F socket – F socket
	DC output: +12V 250 mA
	Frequency range: 45-862 MHz
	Attenuation: 1 dB
	Output connector: F
	Mains voltage: 220 V~ 50 Hz
	Dimensions: 57x81x49 mm

Attenuator
	FR3-6
	Attenuator
	F-plug to F-jack, 6 dB
	5-2400 MHz

	FR3-10
	Attenuator
	F-plug to F-jack, 10 dB
	5-2400 MHz

	FR1F
	Adjustable Attenuator F-jack
	Adjustable from 0 to 20dB
	5-2400 MHz