G-LC-LC-S-001.0-DX-A-28-Y – FIBRAIN DX Patch cord LC/PC-LC/PC, G.652D, dia. 2.8mm, Yellow LS0H jacket, SM, 1m

Categories: ,



G-LC-LC-S-001.0-DX-A-28-Y – FIBRAIN DX Patch cord LC/PC-LC/PC, G.652D, dia. 2.8mm, Yellow LS0H jacket, SM, 1m
Indoor LC/UPC Duplex Fiber Optic Patch Cable

The term fiber optic ‘patch cord’ is also referred to as a Jumper, Jumper cable, Lead, Assembly, Cable, Patch cable and more. They traditionally refer to a length of fiber optic cable which has been terminated at both ends with fibre optic connectors. Their aim is to lose as little light as possible, measured as a decibel (dB) loss or attenuation.

This singlemode 9/125µm fiber optic patch cable is terminated with LC connectors with PC polish. The snap-in connectors are typically used for high-density connections and are compatible with plug-and-play devices such as SFP modules.

For a low smoke emission in case of fire, this Patch Cord is equipped with a flame-resistant, halogen-free LS0H jacket. G.652D LC-LC fiber optic Patch Cords are suitable for the connection of patch panel ports and connection of optical transceivers.

● Singlemode LC duplex patch cord is produce with AB polarity type as a standard
● Easy Polarity Management with Color Coding Boots, Red-Black
● High quality zirconia ferrules
● Good repeatability and interchangeability
● Low insertion loss
● High return loss
● Perfect solution for installs that require extra protection
● LC connectors
● Polished ceramic end-face PC
● Factory terminated and tested for insertion loss, return loss and end face
● Length: 1m

● Building interconnections (campus LAN)
● Connector end in optical distribution boxes and termination boxes
● Trunk lines direct to telecommunications cabinet
● Cross-connect in outdoor termination box
● Distribution connection in central office ODF (optical distribution frame)
● Fiber patch panels within communications frames
● Links between internet electronic equipment (SFP module, switch, OLT, ONU etc.), Cable TV optical equipment (Transmitter, EDFA, Node, etc.) and fiber patch panels

Physical Characteristics:
● Fiber Count: Duplex 9/125
● Fiber type: G.652D
● Connector A: 2x LC
● Connector B: 2x LC
● Polish Type: PC
● Cable Jacket: LS0H
● Jacket Color: Yellow
● Cable Diameter: 2.8mm
● Mating Cycles: ≥1000
● Length: 1m

Optical Characteristics:
● Singlemode fiber
● Max. insertion loss ILmax acc. to IEC 61300-3-4 (dB): ≤0.2
● Typical insertion loss ILtyp acc. to IEC 61300-3-4 (dB): ≤0.15
● Return loss RL acc. to IEC 61300-3-6 (dB): PC ≤55
● Wavelength (nm): 1310/1550
● Repeatability (dB): ≤0.1
● Durability (1000 Mating) (dB): ≤0.2
● Operating Temperature: -25°C to 70°C






Go to Top