OPDA40001-M3 – OM4 MM DX Corning Patch cord LC/UPC-LC/UPC, G.657A2, dia. 2mm, Violet LSZH jacket, 3m

Categories: ,



OPDA40001-M3 – OM4 MM DX Corning Patch cord LC/UPC-LC/UPC, G.657A2, dia. 2mm, Violet LSZH jacket, 3m
Indoor LC/UPC-LC/UPC OM4 Multimode Duplex Fiber Optic Patch Cable

The term fiber optic ‘patch cord’ is also referred to as a Jumper, Jumper cable, Lead, Assembly, Cable, Patch cable and more. They traditionally refer to a length of fiber optic cable which has been terminated at both ends with fibre optic connectors. Their aim is to lose as little light as possible, measured as a decibel (dB) loss or attenuation.

This multi-mode 50/125 fiber optic patch cable is terminated with LC connectors with UPC polish. The snap-in connectors are typically used for high-density connections and are compatible with plug-and-play devices.

For a low smoke emission in case of fire, this Patch Cord is equipped with a flame-resistant, halogen-free LSZH jacket. 50/125 LC fiber optic Patch Cords are suitable for the connection of patch panel ports.

● OM4 Multimode Duplex Patch Cable
● Easy Polarity Management with Duplex Clips
● High quality zirconia ferrules
● Good repeatability and interchangeability
● Low insertion loss
● High return loss
● Perfect solution for installs that require extra protection
● LC connectors
● Polished ceramic end-face UPC
● Factory terminated and tested for insertion loss, return loss and end face
● Length: 3m
● Mechanical performance compliant with IEC 61754-4
● Cable compliant with Telcordia GR-409
● Connectors compliant with Telcordia GR-326

● Building interconnections (campus LAN)
● Connector end in optical distribution boxes and termination boxes
● Trunk lines direct to telecommunications cabinet
● Cross-connect in outdoor termination box
● Distribution connection in central office ODF (optical distribution frame)
● Fiber patch panels within communications frames
● Links between internet electronic equipment (SFP module, switch, OLT, ONU etc.), Cable TV optical equipment (Transmitter, EDFA, Node, etc.) and fiber patch panels

Physical Characteristics:
● Fiber Count: Duplex 50/125
● Fiber type: OM4
● Connector A: 2x LC
● Connector B: 2x LC
● Polish Type A: UPC
● Polish Type B: UPC
● Cable Jacket: LSZH
● Jacket Color: Yellow
● Cable Diameter: 2mm
● Plug times: ≥1000
● Length: 3m

Optical Characteristics:
● Multimode fiber
● Insertion Loss (dB): ≤0.3
● Return Loss (dB): UPC ≥55
● Wavelength (nm): 1310/1550
● Repeatability (dB): ≤0.1
● Changeability (dB): ≤0.2
● Durability (1000 Mating) (dB): ≤0.2
● Operating Temperature: -40°C to 80°C
● Storage Temperature: -45°C to 85°C


Go to Top