XQ200

XQ200 – FIBRAIN CAT6 FTP RJ45 Tooless Keystone, Red dust cover

Description

Description

XQ200 – FIBRAIN CAT6 FTP RJ45 Tooless Keystone, Red dust cover
 
FibrainDATA CAT6 FTP RJ45 connection module, Red dust cover, without adapter
 
FIBRAIN DATA MODULE CAT6 SHIELDED, without adapter XA-HDKS-0-SET
 
High Quality RJ45 CAT6 180 degree Modular Tooless Keystone Jack Shielded
 
Description:
The Cat6 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels.

Cat6 Tooless Keystone Jacks are designed to provide excellent performance which exceeds the industry standard TIA/EIA 568-B/A standard making these jacks perfect for use in today’s high speed networks while remaining completely backwards compatible with all previous standards.

Labeled with both 568-A and 568-B color codes there will be no more memorizing color codes; simply match the colors, insert the conductors and close to lock them in place. Category 6 Keystone Jacks are 8-Position 8-Conductor (8P8C).

FIBRAIN CAT6 FTP RJ45 Tooless Keystone

Features:
● Highest Quality CAT6 RJ45 Keystone Modular Jack for inserting into patch panels, surface mount boxes, or wall plates (face plates)
● Cat6 FTP Keystone jack (180~180degr. exit)
● Screened
● Port density up to 48 ports per 1U
● The highest quality guaranteeing large margins of transmission parameters over the requirements of the standards
● The best performance in conjunction with FibrainDATA and SUMMIT connection cables
● Component complies to IEC 60603-7-41
● Efficient signal compensation inside a module
● Module construction equipped with an element for attaching the inserted cable without the use of cable ties
● Pins covered with layer of gold
● Module construction guaranty a minimal untwist of wire pairs
● Die cast housing guaranties 360º EMC protection
● Identification according to 568A and 568B
● Cat6 performance according to: ISO 11801, EN 50173, ANSI/TIA 568.2-D
● Automatic dust cover
● Housing material: Zinc alloy die cast
● Mating cycles standard/typical: 750/1000
● Solid or stranded wire support in range AWG 26 – AWG 22
● Exchangeable front plates of different colors for color coding
● Toolless termination, no Punch Down tool required
● IDC termination technology
● Cable diameter range: 5.0 ~ 8.5 mm
● Min number of re-terminations: 20
● Support for applications up to 5G

FIBRAIN CAT6 FTP RJ45 Tooless Keystone

Recommended to be used with the following items:
● XA-HDKS-0-SET
● XB-50FPF-0102
● XB-50FPF-0202
● XMU00
● XMS00

Technical Parameters:
Standardization ISO 11801-x, EN 50173-x, TIA 568.2-D, IEC 60603-7-41
PoE IEEE 802.3af/802at and 802bt type 3 and type 4 (up to 100W)
Operation temperature range -10 ⁰C ÷ 60 ⁰C
Storage temperature range -40 ⁰C ÷ 70 ⁰C
Transmission performance Cat.6
Shielding Yes
Housing material Zinc alloy die cast
Max. Current rating [A] 1,5
Min. isolation resistance [MΩ] 500
Max DC resistance [Ω] 20
Material of pin contacts CuSN
Pin contacts plating Min 50 μin of gold layer, min 80 μin of nickel layer
Conductor diameter range (wire) AWG 22 ÷ AWG 26
Conductor diameter range ( stranded wires) AWG 22/7 ÷ AWG 26/7
Cable diameter range 5,0 ÷ 8,5 mm
Mating cycles standard/typical 750/1000
Min number of re-terminations 20
Fixation Without adapters

_

FIBRAIN

Brand

Brand

Fibrain

Go to Top