XR200 – FIBRAIN CAT6A FTP RJ45 Tooless Keystone, Aqua dust cover
XR200
Description
Description
XR200 – FIBRAIN CAT6A FTP RJ45 Tooless Keystone, Aqua dust cover
FibrainDATA CAT6A FTP RJ45 connection module, Aqua dust cover, without adapter
FIBRAIN DATA MODULE CAT6A SHIELDED, without adapter XA-HDKS-0-SET
High Quality RJ45 CAT6A 180 degree Modular Tooless Keystone Jack Shielded
Description:
The Cat6A Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels.
Cat6A Tooless Keystone Jacks are designed to provide excellent performance which exceeds the industry standard TIA/EIA 568-B/A standard making these jacks perfect for use in today’s high speed networks while remaining completely backwards compatible with all previous standards.
Labeled with both 568-A and 568-B color codes there will be no more memorizing color codes; simply match the colors, insert the conductors and close to lock them in place. Category 6 Keystone Jacks are 8-Position 8-Conductor (8P8C).
Features:
● Highest Quality CAT6A RJ45 Keystone Modular Jack for inserting into patch panels, surface mount boxes, or wall plates (face plates)
● Cat6A FTP Keystone jack (180~180degr. exit)
● Screened
● Port density up to 48 ports per 1U
● The highest quality guaranteeing large margins of transmission parameters over the requirements of the standards
● The best performance in conjunction with FibrainDATA and SUMMIT connection cables
● Component complies to IEC 60603-7-51
● Efficient signal compensation inside a module
● Module construction equipped with an element for attaching the inserted cable without the use of cable ties
● Pins covered with layer of gold
● Module construction guaranty a minimal untwist of wire pairs
● Die cast housing guaranties 360º EMC protection
● Identification according to 568A and 568B
● Cat6A performance according to: ISO 11801, EN 50173, ANSI/TIA 568.2-D
● Automatic dust cover
● Housing material: Zinc alloy die cast
● Mating cycles standard/typical: 750/1000
● Solid or stranded wire support in range AWG 26 – AWG 22
● Exchangeable front plates of different colors for color coding
● Toolless termination, no Punch Down tool required
● IDC termination technology
● Cable diameter range: 5.0 ~ 8.5 mm
● Min number of re-terminations: 20
● Support for applications up to 10G
Recommended to be used with the following items:
● XA-HDKS-0-SET
● XB-50FPF-0102
● XB-50FPF-0202
● XMU00
● XMS00
| Technical Parameters: | |
| Standardization | ISO 11801-x, EN 50173-x, TIA 568.2-D, IEC 60603-7-41 |
| PoE | IEEE 802.3af/802at and 802bt type 3 and type 4 (up to 100W) |
| Operation temperature range | -10 ⁰C ÷ 60 ⁰C |
| Storage temperature range | -40 ⁰C ÷ 70 ⁰C |
| Transmission performance | Cat.6A |
| Shielding | Yes |
| Housing material | Zinc alloy die cast |
| Max. Current rating [A] | 1,5 |
| Min. isolation resistance [MΩ] | 500 |
| Max DC resistance [Ω] | 20 |
| Material of pin contacts | CuSN |
| Pin contacts plating | Min 50 μin of gold layer, min 80 μin of nickel layer |
| Conductor diameter range (wire) | AWG 22 ÷ AWG 26 |
| Conductor diameter range ( stranded wires) | AWG 22/7 ÷ AWG 26/7 |
| Cable diameter range | 5,0 ÷ 8,5 mm |
| Mating cycles standard/typical | 750/1000 |
| Min number of re-terminations | 20 |
| Fixation | Without adapters |
_
FIBRAIN
Brand
Brand
Fibrain
