HI-F0820FL – 10-Port 10/100Mbps Desktop Switch with 8-Port PoE Active Switch 120W



10-Port 10/100Mbps Desktop Switch with 8-Port PoE Switch AF/AT 120W

Easy Deployment for SOHO and Home Users
HI-F0820FL, a 8-port 10/100Mbps 802.3at/af Power over Ethernet + 2-port Fast Ethernet Switch, can be easily and quickly deployed for SOHO and home-use PoE application environment by any users as it is compact in size and simple to install. The HI-F0820FL is definitely an ideal solution for SOHO and home users as it has the following advanced features:
• 8-port PoE, 120-watt PoE budget
• Two 10/100Mbps uplink ports
• 250m distance w/30W power output at speed of 10Mbps in the Extend Mode
• Desktop design
• Fanless design

TwoFast Uplink Ports
The HI-F0820FL comes with two uplink ports with 100Mbps transfer rate to ensure high-speed data and video transmission, reliable assurance for connection between the surveillance system and outside network where the eight PoE ports can be used to their full potential.

Ideal Solution for Securing SOHO IP Surveillance Infrastructure
Targeting the growing popular IP surveillance applications, the HI-F0820FL 802.3at/af PoE Switch is also positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding. The HI-F0820FL supports both 802.3at and 802.3af PoE standards along with eight 10/100BASE-TX ports featuring up to 30 watts per RJ45 copper interface, and one extra Fast Ethernet TP interface supporting high-speed transmission of surveillance images and videos.
The built-in solid DIP switch provides “Standard” and “Extend” operation modes. The HI-F0820FL operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. In the “Extend” operation mode, the HI-F0820FL operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the HI-F0820FL provides an additional solution for 802.3at/af PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates ports so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.

Easy Cable Connection
With data switching and power over Ethernet integrated into one unit, the HI-F0820FL reduces cabling requirements and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. With 8 PoE interfaces, the HI-F0820FL is ideal for small businesses and workgroups making the deployment of the PoE facility including wireless access points, IP-based surveillance camera and IP phones in any places easier, more efficient and more cost-effective.

Key Features:
RJ45 Interface
• Ten 10/100Mbps Fast Ethernet ports
• 8 ports support 48V DC power to PoE powered device

Power over Ethernet
• Complies with IEEE 802.3af/at Power over Ethernet end-span
• Up to 8 IEEE 802.3af/2 IEEE 802.3at devices powered
• Supports PoE power up to 30 watts for each PoE port
• 120-watt PoE budget
• Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m in the standard mode

• Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 1K absolute MAC addresses
• Automatic address learning and address aging
• Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing

• Desktop design
• LED indicators for PoE ready/activity and LINK/ACT
• One DC 52V 2.3A external power supply
• Power cord with UK type plug included



Product 8+2 Port 250m POE Switch (External)
Model Hi-F0820FL
POE Port 1 to 8 support IEEE802.3AF/AT Standard
Output Power 15.4W/30W    IEEE802.3af/at
Power Pin both 1/2+, 3/6- and 4/5+7/8-
Whole Power 120W (52V 2.3A)
POE Portocol IEEE 802.3af/IEEE 802.3at
POE Type End-span
Power Distance 250m
Network Standard IEEE 802.3, IEEE802.3u, 802.3x, 802.3af/at
Network Medium 10/100BASE-TX:5 Class and above non shielded twisted pair
Data Distance 250m
Switch Capability 1.6Gbps
Forwarding Mode Store and forward
Forwarding Rate 10BASE-T:14880PPS/port
100BASE-tx: 14800pps/port
MAC Address MAC address table 1K
Port Function Power priority mechanism, fast and forward, MAC automatic learning and aging
IEEE802.3X Full-duplex and mode and backpressure for Half-duplex mode
LED Indicator LINK/ACT.100Mbps;POE Status Indicator; Power indicator;Extender
Working Environment Working temperature: -10~55C
Weight 0.95kg
Size 197mm*75mm*30mm(L*W*H)
Go to Top