| SAT-IF LINE AMPLIFIER and EQUALIZER (SAT & Terrestrial) |
| GECEN |
Remote power SAT-IF line amplifier |
| A0420 |
DC and tone through pass |
|
Zinc die-cast housing, nickel-plated |
| Frequency range: 900-2150 MHz |
| Power supply: 15 +/- 3V DC |
| Power supplied from satellite receiver through coaxial cable |
| DC power passing: 500mA (MAX) |
| Perfect to compensate loss of long LNB downlead cables |
| F jack / F connector for direct connection |
| Gain 20dB |
| |
|
TERRA
|
Remote power SAT-IF line amplifier
|
SA001
|
DC and tone through pass
|
 |
Power supplied from satellite receiver through coaxial cable
|
Perfect to compensate loss of long LNB downlead cables
|
| F jack / F connector for direct connection |
| Gain 22dB |
| |
|
| TERRA |
Remote power SAT-IF line amplifier |
| SA002 |
DC and tone through pass |
 |
For outdoor mounting |
| Power supplied from satellite receiver through coaxial cable |
| Perfect to compensate loss of long LNB downlead cables |
| F jack / F connector for direct connection |
| Gain 10dB |
| |
|
| TERRA |
Remote power SAT-IF line amplifier |
| SA003 |
DC and tone through pass |
|
|
Power supplied from satellite receiver through coaxial cable |
| Perfect to compensate loss of long LNB downlead cables |
| F jack / F connector for direct connection |
 |
SAT Frequency range: 950-2400 MHz, Gain 22dB |
| Maximal output level IMD3=35 dB (EN50083-3): 118 dBμV |
| Integrated LTE signal suppression filter, Frequency range: 47-790 MHz, Gain -3dB |
|
|
| SPAUN |
SAT Slope Equalizer |
| SLR2200F |
To compensate the slope of distribution networks |
 |
Frequency range: 950-2200 MHz |
| Slope control / variation range: 0 to -12 dB |
Slope equalizer will be used in distribution networks where long cable runs cause a higher
|
| through loss in the upper frequency range |
Slope equalizer compensate this higher through loss by having a higher loss in the lower
|
| frequency range compared to the upper frequency range |
| F jack to F plug / F connector |
| |
|
| SPAUN |
SAT Slope Equalizer |
| SLE4420/6F |
To compensate the slope of distribution networks |
|
Frequency range: 950-2200 MHz |
| Slope control (fixed value): -6 dB |
| Slope equalizer will be used in distribution networks where long cable runs cause a higher |
| through loss in the upper frequency range |
| Slope equalizer compensate this higher through loss by having a higher loss in the lower |
| frequency range compared to the upper frequency range |
| F jacks to F quick plugs / F connector |
| |
|
| TERRA |
4 path equalized line amplifier of SAT IF signals |
| SA412 |
For compensation of through losses of multiswitches and interconnection cables in 4 |
|
|
cable distribution system |
| Extremely low power consumption |
| Fixed 4 dB slope precorrection |
| In line powering from H lines |
| DC pass through H & V lines |
| Frequency range: 950-2400 MHz |
| Gain: 13 – 17 dB |
| Maximal output level, IMD3=35 dB (EN 50083-3): 106 dBμV |
| External DC feeding: + 18 V & 1 A max. |
| – |
| – |
| |
|
| MEDIUM POWER LINE AMPLIFIER |
| TERRA |
Amplifier 1 input / 2 outputs with built-in adjustable gain regulators |
| AS036 |
Additional test point attenuation output |
 |
Die-cast housing inside plastic case |
| Built-in power supply |
| Gain 23dB |
| Maximal output level IMD3=60 dB (DIN45004B) 103dBμV |
| Frequency range: 47- 862 MHz |
| |
|
| TERRA |
Amplifier 1 input / 2 outputs with built-in adjustable gain regulators |
| AS036R65 |
With passive return path from output #1 |
 |
Additional test point attenuation output |
| Die-cast housing inside plastic case |
| Built-in power supply |
| Gain 23dB |
| Maximal output level IMD3=60 dB (DIN45004B) 103dBμV |
| Frequency range: 87- 862 MHz |
| Return path Frequency range: 5 – 65 MHz |
| Return path Gain: -2 dB |
|
|
| TERRA |
Amplifier 1 input / 4 outputs with built-in adjustable gain regulators |
| AS038 |
Additional test point attenuation output |
 |
Die-cast housing inside plastic case |
| Built-in power supply |
| Gain 20dB |
| Maximal output level IMD3=60 dB (DIN45004B) 100dBμV |
| Frequency range: 47- 862 MHz |
| |
|
| TERRA |
Medium power amplifier 1 input / 1 output |
| HA024 |
Additional test point attenuation output |
|
Built-in adjustable gain & slope regulators |
| Die-cast housing inside plastic case |
Interstage switchable forward path gain allowing to reduce gain without affect noise figure
|
| of the amplifier |
| Gain 30dB |
| Output level CTB, CSO (EN50083-3) 97dBμV |
| Frequency range: 47- 862 MHz |
| |
|
| TERRA |
Medium power amplifier 1 input / 1 output |
| HA123 |
Additional test point attenuation output |
|
Push-pull technology |
| Built-in adjustable gain & slope regulators |
| Metal-plastic housing for indoor mounting |
| Output test point and screw terminal for equipotential bonding |
| Gain 28dB |
| Output level CTB, CSO (EN50083-3) 101dBμV |
| Maximal output level IMD3=60 dB (DIN45004B) 117dBμV |
| Frequency range: 47- 862 MHz |
| |
|
| TERRA |
Medium power amplifier 1 input / 1 output |
| HA127 |
Push-pull output stage |
 |
Built-in adjustable gain & slope regulators |
| Die-cast housing |
| Switchable forward path gain |
| Gain 36dB |
| Output level CTB, CSO (EN50083-3) 101dBμV |
| Frequency range: 47- 862 MHz |
| |
|
| HIGH POWER LINE AMPLIFIER |
| TERRA |
High power amplifier 1 input / 1 output |
| HA203 |
Additional test point attenuation output and screw terminal for equipotential bonding |
 |
Built-in adjustable gain & slope regulators |
| Metal-plastic housing for indoor mounting |
| Gain 34dB |
| Output level CTB, CSO (EN50083-3) 106dBμV |
| Frequency range: 47- 862 MHz |
| |
|
TERRA
|
High power amplifier with interstage plug-ins 1 input / 1 output
|
BA204U
|
Additional test points: input – bi-directional, output – directional
|
|
Flexibility provided by changeable plug-in modules: return path passive pd 02-xx or
|
| active pr 02-xx, interstage attenuator JXP, slope precorrection and adjustable gain & |
| slope regulators |
| GaAs push-pull output stage |
| Plug-in inverse equalizer |
| Weatherproof and RF-screened die-cast housing |
| Gain 36dB |
| Output level CTB, CSO (EN50083-3) 107dBμV |
| Frequency range: 47/75/87- 862 MHz |
| |
|
| TERRA |
High power amplifier with interstage plug-ins 1 input / 2 output |
| DA213C |
Additional : input – through |
 |
Universal distribution amplifier |
| Combined type of power supply for local or remote powering |
| GaAs push-pull technology |
| Flexibility provided by plug-in return path diplexers |
| Plug-in interstage attenuator and equalizer for improving amplifier performance |
| Weatherproof and RF-screened die-cast housing |
| Switch-mode power supply unit |
| Transient protection at all inputs and outputs |
| Built-in adjustable gain & slope regulators |
| Gain 24dB (36dB for amplifier with plug-in pf 01-12) |
| Output level CTB (EN50083-3) 112 dBμV (42 ch.) |
| Output level CSO (EN50083-3) 113 dBμV (42 ch.) |
| Frequency range: 47/75/87- 862 MHz |
|
|
| TERRA |
High power amplifier with 1 input / 2 output |
| DA233P |
Additional : output – through |
|
Universal distribution amplifier |
| GaAs push-pull technology |
| Flexibility provided by plug-in return path diplexers |
| Plug-in interstage attenuator and equalizer for improving amplifier performance |
| Plug-in inverse equalizer |
| Weatherproof and RF-screened die-cast housing |
| Switch-mode power supply unit |
| Possibility to inject supply voltage for remote powering |
| Transient protection at all inputs and outputs |
| Gain 36dB |
| Output level CTB (EN50083-3) 112 dBμV (42 ch.) |
| Output level CSO (EN50083-3) 113 dBμV (42 ch.) |
| Frequency range: 47/75/87-862 MHz |
| Return path: 5-30/55/65 MHz |
| |
|
| TERRA |
High power amplifier with 1 input / 2 output |
| DA234P |
Additional : output – through |
 |
Universal distribution amplifier |
| GaAs push-pull technology |
| Flexibility provided by plug-in return path diplexers |
| Plug-in interstage attenuator and equalizer for improving amplifier performance |
| Plug-in inverse equalizer |
| Weatherproof and RF-screened die-cast housing |
| Switch-mode power supply unit |
| Possibility to inject supply voltage for remote powering |
| Transient protection at all inputs and outputs |
| Gain 36dB |
| Output level CTB (EN50083-3) 112 dBμV (42 ch.) |
| Output level CSO (EN50083-3) 113 dBμV (42 ch.) |
| Frequency range: 47/75/87-862 MHz |
| Return path: 5-30/55/65 MHz |
| |
|
| TWIN CHANNEL AMPLIFIER |
| TERRA |
Twin TV channel amplifier tunable in all UHF range |
| AT420 |
SAW filters provide a high selectivity processing of digital and analog channels |
 |
Each section has a built-in AGC system and an independent regulator of output level |
| Output signal level indication allows to accelerate the search of fault |
| Digital indication setting of output level |
| Built-in indicators and push buttons allow operatively to set required parameters |
| DIN rail or wall mounting |
| Robust die-cast housing |
| Connectors: 4xRF – type F, screw terminal block for DC entry |
| – |
| Tuning range of channels: 470-862 MHz (21-69 ch.) |
| – |
| RF input analog, level/impedance: 60-90 dBμV/75 Ω |
| RF input digital, level/impedance: 45-80 dBμV/75 Ω |
| RF input, frequency range of RF distribution: 47-862 MHz |
| – |
| RF output analog, level/ impedance: 90 dBμV/75 Ω |
| RF output digital, level/ impedance: 85 dBμV/75 Ω |
| RF output, frequency range of RF combining: 5-2150 MHz |
| RF output, DC pass through: 0.3 A |
| RF output, combining through loss Terr/SAT: 1.5/2.5 dB |
| RF output, level adjustment range: 0 ÷ -10 dB by 1 dB step |
| – |
| AGC dynamic range: 35 dB |
| Noise figure: 8 dB |
| Rejection: 45 dB -2 MHz; 45 dB +1.25 MHz from channel border |
|
|
| SPLITBAND POWER LINE AMPLIFIER |
| TERRA |
Splitband amplifier for amplification signals of SAT and terrestrial TV bands |
| HSA100 |
Suitable for signals combining of SAT and terrestrial TV bands |
 |
Possibility of DC feeding for LNBs from external power supply |
| Possibility of DC and DiSEqC signals pass |
| Built-in separate gain & slope regulators for every band |
| Die-cast housing |
| SAT IF amplifier with active/passive terrestrial TV path, switchable |
| Frequency range: |
| SAT IF: 950- 2400 MHz |
| Terr. TV: 47-862 MHz |
| Gain SAT IF: 23-31 dB (pre-correction) |
| Gain Terr. TV: 21-24 dB (pre-correction)/-4 dB switchable |
| Gain adjustment SAT IF: 10 dB |
| Gain adjustment Terr. TV: 18 dB |
| Slope adjustment SAT IF: 14/8 dB switchable |
| Slope adjustment Terr. TV: 18dB |
| Maximal output level IMD3=35 dB (EN50083-3) SAT IF 120 dBμV (2 equal carriers) |
| Maximal output level IMD3=60 dB (DIN45004B) Terr. TV 115 dBμV |
| |
|
| MULTIBAND TERRESTRIAL MEDIUM POWER AMPLIFIER |
| SPAUN |
Medium power multiband amplifier 4 input / 1 output |
| MBV420F |
Selective frequency range inputs |
 |
Integrated mains power supply |
| Optimized for reception of DVB-T (DTT) |
| Ground clamp |
| Protection class IP 20 |
| Gain B I 10dB |
| Gain UKW 10dB |
| Gain B III 20dB |
| Gain B IV/V 20dB |
| Maximal output level IMD2=60 dB (EN 50083-3) 103dBμV |
| Maximal output level KMA=66 dB (EN 50083-5) 112dBμV |
| |
|
| TERRA |
Medium power multiband amplifier 6 input / 1 output |
| MA011 |
Additional test point attenuation output |
 |
Protection and indication of DC overload |
Switchable DC feeding for preamplifiers through all inputs and separate DC output via
|
| 2.1/5.5 mm socket |
| Metal-plastic housing for indoor mounting |
| Gain VHFI (47-68 MHz) 30dB |
| Gain FM (88-108 MHz) 30dB |
| Gain VHFIII (174-230 MHz) 30dB |
| Gain UHFIV (470-606 MHz) 34dB |
| Gain UHFV (638-862 MHz) 34dB |
| Gain UHF (470-862 MHz) 34dB |
| Maximal output level IMD3=60 dB (DIN45004B) 115dBμV |
| |
|
| TERRA |
Medium power multiband amplifier 6 input / 1 output |
| MA017 |
Additional test point attenuation output |
 |
Protection and indication of DC overload |
Switchable DC feeding for preamplifiers through all inputs and separate DC output via
|
| 2.1/5.5 mm socket |
| Metal-plastic housing for indoor mounting |
| Gain VHFI (47-68 MHz) / FM (88-108 MHz) 2 x 30dB |
| Gain VHFIII (174-230 MHz) 30dB |
| Gain UHFIV (470-606 MHz) 34dB |
| Gain UHFV (638-862 MHz) 34dB |
| Gain UHF (470-862 MHz) 34dB |
| Maximal output level IMD3=60 dB (DIN45004B) 115dBμV |
| |
|
| MULTIBAND TERRESTRIAL HIGH POWER AMPLIFIER |
| TERRA |
High output level amplifiers (push-pull) 6 input / 1 output |
| MA112 |
Additional test point attenuation output |
 |
Protection and indication of DC overload |
| Built-in attenuators for every band |
Switchable DC feeding for preamplifiers through all inputs and separate DC output via
|
| 2.1/5.5 mm socket |
| Metal-plastic housing for indoor mounting |
| Gain VHFI (47-68 MHz) / FM (88-108 MHz) 44dB |
| Gain VHFIII (174-230 MHz) 34dB/42dB (2 inputs of different gain) |
| Gain UHFIV (470-606 MHz) 47dB |
| Gain UHFV (638-862 MHz) 47dB |
| Gain UHF (470-862 MHz) 47dB |
| Maximal output level IMD3=60 dB (DIN45004B) 119dBμV |
| |
|
| TERRA |
High power amplifier 5 input / 1 output |
| MA202 |
Additional test point attenuation output |
|
Die-cast housing |
| Splitband FM+VHF and UHF amplifiers |
| Gain level control with interstage amplifiers and attenuators |
| Protection and indication of DC overload |
| Switchable +12 V DC feeding for preamplifiers through all inputs |
| Gain FM (88-108 MHz) 30dB |
| Gain VHFI (47-68 MHz) 40dB |
| Gain VHFIII (174-260 MHz) 40dB |
| Gain UHF (470-862 MHz) 2 x 47dB |
| Maximal output level IMD3=60 dB (DIN45004B) 118 dBμV (VHF); 121 dBμV (UHF) |
| |
|
| MAST MULTIBAND TERRESTRIAL AMPLIFIER |
| TERRA |
Mast multiband amplifier 2 input / 1 output
|
| MA064 |
For combination and balancing of the signals from 2 TV antennas
|
 |
Built-in attenuators for every band |
| DC feeding via output connector |
| Switchable DC feeding for preamplifier UHF |
| Shielded metal case inside plastic housing |
| For outdoor mounting |
| FM (88-108 MHz) 30dB |
| Gain VHFI (47-68 MHz) 30dB |
| Gain VHFIII (174-260 MHz) 30dB |
| Gain UHF (470-862 MHz) 38dB |
| Maximal output level IMD3=60 dB (DIN45004B) 104dBμV |
|
|
| MAST MULTIBAND AMPLIFIER – POWER SUPPLY |
TERRA
|
Power supply for remote DC feeding through RF input with 2 isolated outputs
|
PI008
|
DC feeding via input connector to mast multiband amplifiers (e.g. AB011, MA054)
|
 |
Die-cast housing inside plastic case |
| Built-in short circuit proof |
| Frequency range 47-862 MHz |
| Gain -4 dB (2 x RF outputs) |
| External DC feeding 12V/100mA max. |
|
|
|
|
Leave A Comment
You must be logged in to post a comment.