Fibre Optic

Fibre Optic


Invacom Fibre Optic Products
	–
FibreMDU Optical LNB C120
	An innovative new design Fibre LNB that converts 4 Universal IF bands, to a single optical output,
	capable of supplying 32 Virtual Converters over a 10 kilometre radius.
	Designed for dishes supplied with their own feed-horn.
	Typically used with motorised dishes.
	–
	–
	–
FibreMDU Optical Output LNB
	An innovative new design Fibre LNB that converts 4 Universal IF bands, to a single optical output,
	capable of supplying 32 Virtual Converters over a 10 kilometre radius.
	–
	–
	–
	–
	–
FibreMDU Virtual Quattro Converter
	The FibreMDU Virtual quad, connects to a single fibre optic cable from a FibreMDU Optical LNB.
	This is done either through a network of passive optical splitters (PON) or directly from the LNB
	(with attenuation).
	Each Virtual Quattro provides 4 fixed feeds (VL -HL -VH -HH) ideal for multi-switches.
	–
	–

FibreMDU Virtual Quad Converter
	The FibreMDU Virtual quad, connects to a single fibre optic cable from a FibreMDU Optical LNB.
	This is done either through a network of passive optical splitters (PON) or directly from the LNB
	(with attenuation).
	Each Virtual Quad provides 4 universal feeds.
	–
	–

Compact Optical Splitters
	Used in the fibre optic industry for many years, these splitters are designed to equally divide the
	optical signal generated by the FibreMDU and FibreIRS systems.
	They are passive, dual window (1310 & 1550nm) and low loss.
	2 way optical splitter
	3 way optical splitter
	4 way optical splitter
	8 way optical splitter

PRO Optical Splitters
	The NEW PRO Fibre Splitters are designed specifically for the Satellite and Aerial industry to support
	all Global Invacom fibre systems.
	Sporting easy fit FC/PC connectors, they allow the installer to connect directly rather than using a
	barrel adaptor to a pigtail. Also designed to equally divide the optical signal generated by the FibreMDU
	and FibreIRS systems.
	They are passive, dual window (1310 & 1550nm) and low loss
	2 way optical splitter
	3 way optical splitter
	4 way optical splitter
	8 way optical splitter

OptiSCAN
	The NEW OptiScan is designed to assist the installer with the installation and alignement of a dish and
	the FibreMDU Optical LNB.
	The OptiScan shows transponder identity and position, read directly from the satellite, with a ‘Favorites’
	function for the quick storage.
	–
	–

FibreROD
	FibreRODs are NEW to our range and consist of 6 flexible rods (of varying flex), 2 x FC/PC adapter
	and 1 x wire pulling sock.
	They are designed to assist the installer with pre and un-terminated fibre cable routing.
	–

FibreLIGHT Visible Light Source
	The NEW GI FibreMDU Visible Light Source is designed to assist the installer during installation in
	finding faults within the optical cable, after fitting connectors.
	It does this by beaming a low powered red laser light through the fibre cable to show where there
	may be leakage or damaged areas.
	–

Fibre Connectors & Attenuators
	Global Invacom provide a number of fibre connectors and attenuators that assist with the installation
	of a fibre system.
	There are Barrel Connectors and Adapters designed to aid a trouble free install and attenuators of
	varying values used when the optical signals are too strong (type, male to female).
	Joiner for 2 pre-terminated optical leads
	5dB optixcal attenuator
	OT2 Optical Terminator
	10dB optixcal attenuator
	15dB optixcal attenuator
	20dB optixcal attenuator

FibreCLEANING Kit
	When installing a fibre system it is imperative that the end-face of every fibre cable is spotless.
	The NEW FibreCLEANING Kit comprises of Wipes, a cleaning fluid pen and a pot of swabs which
	provide the complete cleaning solution.
	Cleaning Cube
	Solvent Pen
	2.5mm Fibre Swabs

3.0 Steel Armoured Fibre Optic Cable
	The 0.9 micron G657a Single Mode fibre used in our 3.0 cable is protected by a tight fitting PVC buffer,
	flexible steel tape and a Kevlar layer. Encased in a UV stable, low smoke, zero halogen PVC outer
	jacket, our 3.0 cable is the most flexible, damage resistant fibre cable available to the satellite and
	aerial industry.
	Pre-Terminated 1m
	Pre-Terminated 3m
	Pre-Terminated 5m
	Pre-Terminated 10m
	Pre-Terminated 15m
	Pre-Terminated 20m
	Pre-Terminated 30m
	Pre-Terminated 40m
	Pre-Terminated 50m
	Pre-Terminated 75m
	Pre-Terminated 100m
	Pre-Terminated 150m
	Pre-Terminated 200m
	Pre-Terminated 500m