| Network Products: |
| Cabinets, Cables, Connectors, Plugs, Homeplugs, Wifi Extenders, |
| Indoor/Outdoor Wifi Antennas, Switches, PoE Switches/Injectors, |
| Routers and Tools |
 |
 |
|
|
 |
 |
| Cabinets and Accessories | |
 |
628024 |
| Cabinet 20U Depth 500 mm | |
| – | |
| 980098 | |
| Cabinet 16U Depth 600mm | |
| – | |
| 980136 | |
| Cabinet 32U Depth 600 mm |
|
| – | |
| 628034 | |
| Cabinet 42U Depth 800 mm | |
 |
672005 |
| 19′ Shelf | |
| –– | |
 |
907072 |
| Panel 24 Port Shielded 19″ CAT5 1U | |
| –– | |
 |
907071 |
| 19″ Brush Panel for Patch Panel 1U | |
| HomePlug Ethernet Adapter | |
| |
TECHNOMATE |
| |
TM-85HP |
| |
– |
 |
The TM-85HP is a HomePlug Turbo device that utilizes the existing electrical |
| wiring in the house as a path to create a secured network of computers and | |
| Ethernet devices. No device driver required to work. With a maximum data rate |
|
| of 85 Mbps, the TM-85HP can reliably provide Internet connection among linked |
|
| devices. It can be used in Windows, Macintosh, or Linux operating systems |
|
| immediately out of the box. PowerPacket Utility software included, allows you to |
|
| manage and monitor these devices. It also allows to communicate with other | |
| HomePlug Turbo and HomePlug 1.0 devices. | |
| – | |
| Product Description: TM-85HP 85Mbps HomePlug Ethernet Adapter Starter Kit | |
| Box Contains: 2pcs TM-85HP HomePlug Ethernet Adapters, 2pcs Network Cables, | |
| Resource CD, Easy Start Guide | |
| Line Rate: 85Mbps | |
| |
Protocol: HomePlugAV 1.0, co-exists with existing HomPlug 1.0 |
| IEEE 802.3 10/100 Ethernet, IEEE 802.3u Fast Ethernet | |
| Operating System: Windows 98SE, 2000, Me, XP, Vista, 7, MAC, Linux | |
| Ethernet Interface: 1x RJ45 for 0/100 Ethernet (Auto MDI/MDI-X) | |
| Encryption: 56-bit DES Link Encryption |
|
| LEDs: Power, Data (Powerline Link & Activity), Ethernet (Ethernet link & Activity) | |
| Power socket: UK Type | |
| |
TECHNOMATE |
| |
TM-200HP |
| – | |
 |
The TM-200HP is a HomePlugAV device that utilizes the existing electrical |
| wiring in the house as a path to create a secured network of computers and | |
| Ethernet devices. No device driver required to work. With a maximum data rate |
|
| of 200 Mbps, the TM-200HP can reliably provide Internet connection among linked |
|
| devices, such as computers, routers, gaming consoles, hubs, IPTV set-top boxes |
|
| with high definition video streaming and Voice over IP. | |
| It can be used in Windows, Macintosh or Linux operating systems immediately |
|
| out of the box. HomePlug AV Utility software included, allows you to manage and |
|
| monitor these devices. It also allows to communicate with other HomePlugAV | |
| devices. | |
| The Technomate HomePlugAV offers SimpleConnect – a simpler way to set up |
|
| your Home Plug network. With just the press of a button, HomePlugAV devices |
|
| can create or join a secure network. No computer is needed. | |
| – | |
| Product Description: TM-200HP 200Mbps HomePlug Ethernet Adapter Starter Kit | |
| Box Contains: 2pcs TM-200HP HomePlug Ethernet Adapters, 2pcs Network Cables, | |
| Resource CD, Easy Start Guide | |
| Line Rate: 200Mbps | |
| Protocol: HomePlugAV 1.0, co-exists with existing HomPlug 1.0 | |
| IEEE 802.3 10/100 Ethernet, IEEE 802.3u Fast Ethernet | |
| Operating System: Windows 98SE, 2000, Me, XP, Vista, 7, MAC, Linux | |
| Ethernet Interface: 1x RJ45 for 0/100 Ethernet (Auto MDI/MDI-X) | |
| Encryption: 128-bit AES Encryption |
|
| LEDs: Power, Data (Powerline Link & Activity), Ethernet (Ethernet link & Activity) | |
| Power socket: UK Type | |
| TECHNOMATE | |
| TM-500HP | |
| – | |
 |
Turn any electrical outlet into a high-speed network connection |
| With the TM-500 HP you can extend your home network by using electrical |
|
| sockets. Forget about drilling and rewiring cable throughout your house, |
|
| with the TM-500 HP you can have internet anywhere in the house (on the | |
| same powerline) in a simple and convenient plug ‘n’ play system with no set |
|
| up required. | |
| – | |
| Complying with the HomePlug AV standard, the TM-500 HP gives you a data | |
| transmission speed of up to 500Mbps, together with the built-in QoS that |
|
| gives bandwidth intensive and sensitive applications a higher priority to |
|
| remain stable and fast. | |
| – | |
| Forget Wireless | |
| No need to worry about wireless signal strength and walls reducing signal quality. | |
| – | |
| Simply Plug ‘n’ Play | |
| No complex configuration is required for installation, just plug one adapter |
|
| into a power outlet, connect it to your computer via the network cable, plug |
|
| the second adapter into another power outlet and press the encryption button |
|
| and you are ready to go! | |
| – | |
| HD Multimedia Streaming | |
| Connect your Internet-ready TV, Blu-ray™ player, IPTV set-top box or gaming |
|
| console through any power outlet in your home for super-fast 500Mbps transfer |
|
| speeds. | |
| – | |
| Secure | |
| With its powerful 128-bit AES encryption, your network is secure and protected. | |
| – | |
| Product Features: |
|
| TM-500HP 500Mbps HomePlug Ethernet Adapter Starter Kit | |
| Extremely small…smaller than a credit card! | |
| HomePlug AV Compliant | |
| Up to 200m range over household powerline | |
| Plug ‘n’ Play – no configuration necessary | |
| Up to 60% Reduction in energy consumption (standby mode) | |
| 128-bit AES Encryption | |
| Built-in QoS | |
| Includes: 2x 500Mbps HomePlugs, 2x 1.8m Ethernet Cable, CD | |
| Power socket: UK Type | |
| |
TP-Link |
| |
TL-PA4010KIT |
| |
– |
 |
TP-Link TL-PA4010 500Mbps Powerline Starter Kit |
| Features: | |
| o HomePlug AV standard compliant and offers high speed data transfer up to |
|
| 500 Mbit/s | |
| o Miniature design is smaller than most of the power line adapters available |
|
| on the market | |
| o No new wiring cables needed, Plug and Play with no configuration |
|
| o Patented power save mode automatically reduces power consumption by up |
|
| to 85% |
|
| – | |
| Modulation Technology: OFDM | |
| Encryption: 128-bit AES Encryption | |
| |
Certification: CE, FCC, RoHS |
| Standards and Protocols: HomePlug AV, IEEE802.3, IEEE802.3u | |
| Interface: 1 * 10/100Mbps Ethernet Port | |
| Button: Pair Button | |
| Dimensions (w * h * v): 65 × 52 × 28.5 mm | |
| LED: PWR, PLC, ETH | |
| Consumption: <2.0 W | |
| Distance: 300m in house | |
| TP-Link | |
| TL-WPA4220KIT | |
|
– |
|
 |
TP-Link TL-WPA4220KIT N300 Powerline Extend.Kit |
| Starter Kit with wireless repeater AV500 powerline with a speed of 300 Mbit/s | |
|
– |
|
| Overview |
|
| Starter Kit TP-LINK TL-WPA4220 KIT expands your Internet connection into |
|
| every room of the house using existing electrical network. Set TL-WPA4220 |
|
| is equipped with a button Cloning Wi-Fi enabling large extension range, which |
|
| means it can automatically copy the SSID and password for your router. |
|
| In this way, a set of TL-WPA4220 simplifies the configuration of Wi-Fi and a |
|
| seamless roaming within a home network. | |
| – | |
 |
FEATURES |
| • The cloning Wi-Fi for a large extension range simplifies the configuration of |
|
| Wi-Fi and helps to create a single seamless home network | |
| • Standard HomePlug AV offers through household electrical network high |
|
| speed data transfer speeds of up to 500 Mbit/s, which is ideal for streaming |
|
| HD or 3D video and online gaming | |
| • Expand 300Mbit/s wireless connectivity to previously difficult to reach areas |
|
| of your home and office | |
| – | |
| HARDWARE FEATURES |
|
| Standards and Protocols | |
| • HomePlug AV, IEEE802.3, IEEE802.3u, IEEE802.11b / g / n | |
| – | |
| Interface | |
| • 2 * 10 / 100Mbps Ethernet Port | |
| – | |
| Button | |
| • Pair, Reset, Wi-Fi / Wi-Fi Clone | |
| LED | |
| • PWR, PLC, ETH, Wi-Fi / Wi-Fi Clone | |
| Reach | |
| • 300m over the electricity grid | |
| – | |
| DRAG |
|
| Modulation Technology | |
| • OFDM (PLC) | |
| – | |
| Encryption | |
| • Powerline Security: 128-bit AES | |
| • Wireless Security: WEP, WPA / WPA2, WPA-PSK / WPA2-PSK Encryption | |
| – | |
| OTHER |
|
| Package Contents | |
| • Powerline Ethernet Adapter TL-WPA4220 & TL-PA4010 | |
| • 2m Ethernet cable (RJ45) | |
| • Resource CD | |
| • Quick Installation Guide | |
| – | |
| System Requirements | |
| • Windows 2000 / XP / 2003 / Vista, Windows 8.7, Mac, Linux | |
| Wireless AP/Repeater/Bridge | |
| Tenda | |
| W316R | |
| – | |
 |
Tenda W316R WiFi-N 150 Router, 1x WAN, 4x LAN, 1x Fix. Ant 5dBi |
| – | |
| Description |
|
| Wireless Wi-Fi router supports 802.11n-lite 2.4 GHz, which allows you to |
|
| configure the single-antenna communication speeds up to 150 Mb / s. |
|
| Tenda W316R betting on the new, cleverly designed Broadcom BCM5356 |
|
| chipset, which was developed for a maximum transmission speed of up to |
|
| 80 Mb / s. And all this, consume about four watts! The new chipset brings |
|
| the “Green Wi-Fi mode” that dynamically off-chip components, thereby |
|
| reducing active power consumption. The device uses the properties of the |
|
| router, home Internet gateway, wireless access point, 4-port switch and |
|
| firewall in one. Tenda W316R is suitable for smaller firms and to households |
|
 |
for sharing an Internet connection from your ISP. Router implements a WDS |
| link two or more AP and increase the wireless range. Tenda W316R motto |
|
| “Easy to Use” and thus puts the accent on the easiest setting. Tenda W316R | |
| strongest supports WPA2-PSK, the option to disable broadcast the name of |
|
| your wireless network (SSID), MAC address filtering, port forwarding, and |
|
| other standard network functions. Content filtering provides control access |
|
| to inappropriate websites. The device is equipped with a non-removable |
|
| omni-directional antenna with a gain of 5 dBi. | |
| – | |
| W316R is a 802.11n compliant wireless router that delivers up to 4x faster |
|
| wireless speeds (150Mbps) and 3x farther range than 802.11g while staying |
|
| backward compatible with 802.11g/b devices. | |
| – | |
 |
The router supports WPA/WPA2 wireless security standards ensuring that you |
| will be able to use the best possible encryption regardless of your other |
|
| wireless devices. | |
| – | |
| Intelligent QoS: Prioritizes both wired and wireless Internet traffic to |
|
| bandwidth-sensitive applications like online gaming, VoIP or stream |
|
| multimedia. | |
| – | |
| Specifications |
|
| Wi-Fi standards: 802.11b / g / n | |
| Frequency: 2.4 GHz | |
| Wireless Modes: AP, Router, WDS Repeater | |
| Bit rate: 150 Mb/s | |
| Modulation: DSSS, OFDM | |
| Channel Width: 20 MHz, 40 MHz | |
| Output Power: <20 dBm (EIRP) | |
| Output Power Control: no | |
| Sensitivity: -87 dBm @ 11 Mb/s, -74 dBm @ 54 Mb/s, -68 dBm @ 150 Mb/s | |
| Security: WEP, WPA-PSK, WPA2-PSK, MAC ACL, URL filtering | |
| Control Methods: HTTP | |
| Network Function: UPnP, SNTP, virtual server, DMZ host, DHCP server / |
|
| client, WDS, WPS | |
| QoS: 802.11e WMM | |
| Central management: no | |
| PoE: no | |
| Interface: 1x WAN, 4x LAN, the RESET / WPS | |
| Antenna: 1x 5dBi external, undismountable | |
| Chipset: Broadcom BCM5356 | |
| Design: indoor, desktop, can be mounted to wall / ceiling | |
| Housing Material: Plastic | |
| Power supply: 9V DC 600 mA | |
| Consumption: 2W | |
| Cooling: passive | |
| Operating Temperature: 0 °C to 40 °C | |
| |
Tenda |
| |
W303R |
| |
Wireless N300 RangeMax Router |
 |
– |
| What It Does | |
| The 300Mbps Wireless W303R RangeMax Router, W303R, delivers up to 14x |
|
| faster speeds and 6x farther range than 802.11g and is seamlessly backward | |
| compatible with wireless 802.11g/b devices. This Router uses MIMO technology |
|
| to reduce dead spots and maximize the speed and range of your wireless signal |
|
| to significantly outperform previous-generation Wireless G devices. Connect the | |
| W303R to a cable or DSL modem and it will provide high-speed Internet access |
|
| to multiple computers, game consoles, and media players or create a secure |
|
| wireless network to share photos, files, music, videos, printers, and more | |
| throughout the entire home or office | |
| – | |
| Main Features | |
| >> WISP client provides seamless connection to your WISP | |
| >> Easy to install, easy to use with the world’s most intuitive UI | |
 |
>> Three high gain antennas greatly increase the wireless robustness and stability |
| >> Intelligent bandwidth control prioritizes optimal bandwidth down to a |
|
| specific computer based on IP address | |
| >> More useful features like Client Filter, URL filter, DDNS, and port forwarding,etc | |
| – | |
| Maximum Wireless N Performance | |
| Equipped with 3 antennas and 3×3 MIMO technology, users can create a high |
|
| speed wireless network and up to 18X the speed and 6X the range of conventional |
|
| 11g products. It shows more excellent abilities of mitigating data loss over long |
|
| distances and through obstacles in a small office or a large apartment, even in a |
|
| steel-and-concrete building. Above all, you could easily pick up the wireless |
|
| network in a long-distance connection where legacy 11g products may not! | |
| – | |
| WISP Client Connects You to Internet Wirelessly | |
| In WISP Client mode, the device wirelessly connects to a WISP (wireless Internet |
|
| Service Provider) AP and acts as a router for clients on the LAN, to allow the |
|
| clients to still access the Internet even it is using wireless technology. | |
| – | |
| Intelligent Bandwidth Control | |
| With Intelligent bandwidth control feature, the device prioritizes optimal |
|
| bandwidth down to a specific computer or device based on IP address. |
|
| So, bandwidth-intensive tasks such as voice, video and data transmission can |
|
| be conducted simultaneously without lag. It allows optimum utilization of |
|
| bandwidth and offering bandwidth control over congestion, preventing bandwidth |
|
| abuse and non-critical applications from degrading network performance. |
|
| In this way, users of a small network receive committed and specific bandwidth. | |
| – | |
| Advance Wireless Security Blocks Unauthorized Access | |
| Offers the latest wireless security features to help prevent unauthorized access |
|
| |
from over a wireless network. WEP, WPA and WPA2 standards ensure that you |
| |
will be able to use the best possible encryption, regardless of your client devices. |
| |
Plus the Access Control based on MAC addresses of wireless adapters further |
| ascertains that wireless network access is granted to only desired clients while |
|
| others will be denied.SSID Broadcast: Enable/Disable: Making your wireless |
|
| network visible/invisible to others is all at your choice. | |
| – | |
| Easy to Manage Internet Access | |
| The device provides ways to allow/disallow a specific PC to access Internet or a |
|
| specific website during a specified time length using the Client, MAC and/or URL |
|
| filter features. It is simple and easy to deploy and also helps administrators to |
|
| better manage network resources. | |
| Tenda | |
| W309R+ | |
| – | |
 |
Tenda W309R+ WiFi-N 300 Router, 2x Ext. Antennas 9 dBi |
| Wireless Wi-Fi router 802.11b/g/n, 2.4 GHz band. Transfer speeds up to |
|
| 300Mb/s. Support for WPA/WPA2. 2x detachable omnidirectional antenna 9 dBi. |
|
| – | |
| Description |
|
| Tenda W309R+ includes a new version of the Broadcom BCM5357 chipset, |
|
| codenamed Intensi-Fi® – get ready for a really intense experience. The new |
|
| chipset brings the “Green Wi-Fi mode” that dynamically off-chip components, |
|
| thereby reducing active power consumption to only 6 Watt! | |
| – | |
| The device uses the properties of the router, home Internet gateway, wireless |
|
| access point, 4-port switch and firewall in one. It implements a WDS link for |
|
| two or more AP and increase the wireless range. | |
| – | |
| Tenda W309R+ supports the strongest security WPA2-PSK, the option to |
|
| disable broadcast the name of your wireless network (SSID), MAC address |
|
| filtering, port forwarding, and other standard network functions. Content |
|
| filtering provides control access to inappropriate websites. The device is |
|
| equipped with two removable omnidirectional antennas with a gain of 9dBi | |
| and provides indeed a maximum range of wireless network. | |
| – | |
| Specifications |
|
| Wi-Fi standards: 802.11b / g / n | |
| Frequency: 2.4 GHz | |
| Wireless Modes: AP, Router, WDS Repeater, WISP, Universal Repeater Mode | |
| Bit rate: 300 Mb/s | |
 |
Modulation: DSSS, OFDM |
| Channel Width: 20 MHz, 40 MHz | |
| Output Power: <20 dBm (EIRP) | |
| Output Power Control: no | |
| Sensitivity: -87 dBm @ 11 Mb/s, -72 dBm @ 54 Mb/s, -68 dBm @ 270 Mb/s | |
| Security: WPA-PSK, WPA2-PSK, MAC ACL, URL filtering | |
| Control Methods: HTTP, Remote web management | |
| Network Features: UPnP, SNTP, virtual server, DMZ host, DHCP server/client, |
|
| WDS, WPS | |
| QoS: 802.11e WMM | |
| Central management: no | |
| PoE: no | |
| Interface: 1x WAN, 4x LAN, the RESET / WPS | |
| Antenna: 2x 9 dBi external detachable | |
| Antenna connector: SMA female reverse | |
| Chipset: Broadcom | |
| Design: indoor, desktop, due to wall / ceiling | |
| Housing material: plastic | |
| Power supply: 9V DC 1000 mA | |
| Consumption: 6W | |
| Cooling: passive | |
| Operating Temperature: 0° to 40 °C | |
| Dimensions (W x H x D): 259 x 334 x 74 mm | |
| Weight: 810 g | |
| |
|
| |
TECHNOMATE |
| |
TM-500HPWIFI |
| |
– |
 |
A world’s first! |
| The TM-500 HP WIFI is the world’s first 500Mbps HomePlug + Dual Band |
|
| 5Ghz/2.4Ghz Range Extender 2in1! | |
| – | |
| We all know how frustrating it is to run out of signal with your wireless devices, |
|
| especially if your wireless signal stops only metres from certain points in your | |
| home or office so you can’t browse the internet, stream videos, send/receive | |
| e-mails… on your iPad®, Android® tablet, smartphone, media player… | |
| – | |
| Furthermore, what if that device is using the latest superfast 5Ghz bandwidth |
|
| such as with the iPhone 5S and Samsung Galaxy 5? With most range extenders, |
|
| you would only be able to use the slow 2.4Ghz bandwidth. What if you also |
|
 |
wanted to connect two wired devices at the optimum HomePlug speed of |
| 500Mbps? We developed the TM-500 HP WIFI to resolve your speed, wired and |
|
| wireless frustrations! | |
| – | |
| Installation is simple. You need only connect the TM-500 HP WIFI to your |
|
| computer once to set it up with your network and then you can place it into |
|
| any power outlet to use it as a range extender and to connect up to 2 wired |
|
| devices. | |
| – | |
| Dual Band 2.5Ghz & 5Ghz | |
| The TM-500 HP WIFI’s range extender can work on WiFi bands of 2.4Ghz & 5Ghz | |
| – | |
| |
Nearly all range extenders only work on the congested and slow 2.4Ghz band |
| |
which suffers from interference from microwaves, Bluetooth, wireless devices, |
| |
ovens, cordless phones, etc, reducing and even disrupting the wireless signal |
| |
– |
| |
5Ghz has more bandwidth and less interference providing you with a faster |
| |
signal and better connection without interruption. |
| |
– |
| |
Compatible 5Ghz devices include: iPhone 5, 5S, iPad Retina, iPad Mini |
| |
(& Retina), Samsung Galaxy 5, amongst others. |
| |
– |
| |
Built in QoS traffic prioritization technology is designed to deliver your |
| time-sensitive Internet traffic efficiently so you can enjoy smooth video, music |
|
| streaming, and gaming performance. | |
| – | |
| The advanced security solutions of 128-bit AES, WEP, WPA, WPA2 & EAP |
|
| encryptions are included for that extra peace-of-mind. | |
| – | |
| 500Mbps HomePlug | |
| With the TM-500 HP WIFI you can extend your home network by using |
|
| electrical sockets. Forget about drilling and rewiring cable throughout your |
|
| house, with the TM-500 HP WIFI you can have internet anywhere in the house |
|
| (on the same powerline) in a simple and convenient plug ‘n’ play system. | |
| – | |
| Complying with the HomePlug AV standard, the TM-500 HP WIFI gives you a |
|
| data transmission speed of up to 500Mbps, together with the built-in QoS that |
|
| gives bandwidth intensive and sensitive applications a higher priority to remain |
|
| stable and fast. | |
| – | |
| You can also connect up to two wired devices! | |
| – | |
| *The TM-500 HP will be required to form a HomePlug connection in order for |
|
| both the wired & wireless connections to function | |
| – | |
| Product Features: |
|
| HomePlug & Wireless Range Extender | |
| Up to 500Mbps wired & 300Mbps Dual Band wireless! | |
| Supports: Wireless 2.4Ghz/5Ghz Dual Band Wireless IEEE 802.11 a/b/g/n, |
|
| IEEE 802.3 10/100 Ethernet, IEEE 802.3u Fast Ethernet | |
| Wireless Strength Indicator | |
| No more wireless blind spots! | |
| Advanced Security: 128-bit AES, WEP, WPA, WPA2, EAP | |
| QoS | |
| WPS | |
| Up to 60% Reduction in energy consumption (standby mode) | |
| HomePlug AV Compliant | |
| Up to 200m range over household powerline | |
| Plug ‘n’ Play – no configuration necessary | |
| Two Ethernet Ports | |
| Power socket: UK Type | |
| |
TP-Link |
| |
TL-WA854RE |
 |
300Mbps Universal WiFi Range Extender |
| – | |
| Wireless N Repeater Wall Plugged, QCOM, 2T2R, 2.4GHz, 802.11n/g/b, Ranger | |
| Extender button, Range extender mode, WPS, with internal Antennas without | |
| Ethernet Port | |
| – | |
| Overview | |
| Range Extender mode boosts wireless signal to previously unreachable or |
|
| hard-to-wire areas flawlessly | |
| Miniature size and wall-mounted design make it easy to deploy and move flexibly | |
| Easily expand wireless coverage at a push of Range Extender button | |
| – | |
 |
Technical Specification |
| Certifications: CE, RoHS | |
| Depth (mm): 65.8 mm | |
| External Colour: White | |
| Height (mm): 75.2 mm | |
| Local Area Network Architecture: Wi-Fi | |
| Maximum Operating Ambient Temperature: 40 °C | |
| Maximum Operating Humidity: 90% | |
| Maximum Power Consumption: 3 W | |
| Minimum Operating Ambient Temperature: 0 °C | |
| Minimum Operating Humidity: 10% | |
| Status Indicator: Activity Status | |
| Width (mm): 110 mm | |
| Plug Type: UK | |
| |
TP-Link |
| |
TL-WR841N |
 |
Router TP-Link TL-WR841N 300Mbps WiFi Wireless LAN |
| – | |
| Wireless N speed up to 300Mbps makes it ideal for bandwidth consuming |
|
| or interruption sensitive applications like HD video streaming, online gaming | |
| and VoIP | |
| Two antennas greatly increase the wireless robustness and stability | |
| Easily setup a WPA encrypted secure connection at a push of the WPS button | |
| IP based bandwidth control allows administrators to determine how much | |
| bandwidth is allocated to each PC | |
| – | |
 |
Features: |
| 300Mbps wireless transmission rate, adopts MIMO, CCA™ technology, | |
| allows for faster speed, further wireless coverage, more stable performance | |
| For home and o ce use, Supports PPPo Dynamic IP, and static IP | |
| broadband access and various kind of dialing requirements | |
| Supports UPnP, DDNS, static routing, VPN Pass-through, and data forwarding | |
| Provides 64/128/152-bit WEP encryption, supports WPA/WPA2, |
|
| WPA-PSK/WPA2-PSK authentication | |
| WDS wireless bridge provides seamless bridging to expand your wireless |
|
| network | |
| QoS function assures the quality of VoIP and multimedia streaming | |
| |
Wi-Fi On/Off Button allows users to simply turn their wireless radio on or off |
| |
Features parental control function managing the internet access of children |
| |
or employee’s computer |
| |
Supports virtual server, special application and DMZ host ideal for creating a |
| |
website within your LAN |
| |
Offers Auto-mail function for system log, convenient for managing the router |
| |
Backward compatible with 802.11b/g products |
| |
Easy Setup Assistant provides quick & hassle free installation |
| |
Two external non-detachable antennas allow for better alignment |
| |
Sleek exterior, can be mounted on a wall or placed horizontally on a table |
| |
or desk |
| |
|
| |
TP-Link |
| |
TL-WR841ND |
 |
Router TP-Link TL-WR841ND 300Mbps WiFi Wireless LAN |
| – | |
| 300Mbps wireless speed ideal for interruption sensitive applications like |
|
| HD video streaming | |
| Two antennas greatly increase the wireless robustness and stability | |
| Easy wireless security encryption at a push of WPS button | |
| IP based bandwidth control allows administrators to determine how |
|
| much bandwidth is allocated to each PC | |
| – | |
| Features: | |
| Wireless N speed up to 300Mbps makes it ideal for bandwidth consuming |
|
 |
or interruption sensitive applications like video streaming, online gaming and |
| VoIP | |
| 2T2R MIMO™ delivers greater throughput at range versus conventional 1T1R | |
| Easily setup a WPA encrypted secure connection at a push of the WPS button | |
| WDS wireless bridge provides seamless bridging to expand your wireless network | |
| QoS function assures the quality of VoIP and multimedia streaming | |
| Wi-Fi On/Off Button allows users to simply turn their wireless radio on or off | |
| Features parental control function managing the internet access of children or | |
| employee’s computer | |
| Supports virtual server, special application and DMZ host ideal for creating a | |
| website within your LAN | |
| |
Offers Auto-mail function for system log, convenient for managing the router |
| |
Backward compatible with 802.11b/g products |
| Easy Setup Assistant provides quick & hassle free installation | |
| External detachable antennas allow for better alignment and stronger antenna | |
| upgrades | |
| Sleek exterior, can be mounted on a wall or placed horizontally on a table or | |
| desk | |
| |
TP-Link |
| |
TL-WR843ND |
 |
TP-Link TL-WR843ND WiFi 300Mbps Wireless AP/Client Router |
| – | |
| Highlights: | |
| Wireless ISP function provides the wireless Internet access in areas without |
|
| wired ISP infrastructure | |
| 300Mbps wireless speed ideal for latency sensitive applications like HD video |
|
| streaming | |
| Easily setup a WPA2 encrypted secure connection at a push of the WPS button | |
| WAN Port supports up to 30 meters Passive Power over Ethernet | |
| WDS wireless bridge provides seamless bridging to expand your wireless |
|
| network | |
 |
– |
| Features: | |
| 300Mbps wireless data transfer ideal for interruption sensitive applications like |
|
| HD video streaming | |
| Client Router Mode supports WISP Internet connection, allowing users to share |
|
| an Internet connection wireless or via cables | |
| WAN Port supports up to 30 meters (100 feet) Passive Power over Ethernet | |
| Easily setup a WPA2 encrypted secure connection at a push of the WPS button | |
| Provide hardware switch to change the device’s operation mode easily | |
| WDS wireless bridge provides seamless bridging to expand the wireless network | |
| IP based Bandwidth Control allows administrators to determine how much |
|
| |
bandwidth is allocated to each PC |
| |
Live Parental Control allow parents or administrators to established restricted |
| |
access policies for children or staff |
| |
IP and MAC binding effectively prevents ARP attacks |
| TP-Link | |
| TL-WR1043ND | |
| TP-Link TL-WR1043ND Ultimate Wifi N Gigabit Router | |
| – | |
 |
OVERVIEW |
| 300Mbps Wireless N Gigabit Router TL-WR1043ND is a combined |
|
| wired/wireless network connection device integrated with internet-sharing |
|
| router and 4-port switch. It creates wireless network with incredibly high |
|
| speeds of up to 300Mbps, which ensures that you are free to simultaneously | |
| enjoy multiple high-bandwidth consuming and interruption sensitive |
|
| applications such as streaming HD video, making VoIP calls, sharing large |
|
| files and playing online games. Specially, it is equipped with a USB storage |
|
| port on the back of the router for connecting USB storage devices to the |
|
| network, for convenient resource sharing for everyone on the network. | |
| – | |
| • 300Mbps Wireless speed and Gigabit Ethernet ports are ideal for multiple |
|
| HD video streaming | |
 |
• Speed boost mode increases wireless speeds up to 450Mbps |
| • Multi-functional USB 2.0 port – Easily share printers, files or media with |
|
| your friends or family locally or over the internet using the device’s ftp |
|
| server functions so that you never have to part with your files | |
| • Wireless security encryption easily at a push of WPS Button | |
| • With 5 built-in gigabit ports and a Hardware NAT function, the wireless | |
| router provides powerful data processing capabilities. Its NAT WAN to LAN |
|
| throughput can achieve up to 800Mbps+ allowing users to unleash the full |
|
| potential of their networks | |
| – | |
| HARDWARE FEATURES | |
| Interface | |
| • 4 10/100/1000Mbps LAN Ports | |
 |
• 1 10/100/1000Mbps WAN Port |
| • 1 USB 2.0 Port | |
| Button | |
| • WPS/Reset Button | |
| • Power Button | |
| • Wi-Fi Button | |
| – | |
| External Power Supply | |
| • 12VDC / 1.5A | |
| – | |
| Wireless Standards | |
| • IEEE 802.11n, IEEE 802.11g, IEEE 802.11b | |
| – | |
| Antenna | |
| • 5dBi*3 Detachable Omni Directional (RP-SMA) | |
| – | |
| Dimensions ( W x D x H ) | |
| • 225 x 141 x 30mm | |
| – | |
| WIRELESS FEATURES | |
| Frequency | |
| • 2.4-2.4835GHz | |
| – | |
| Signal Rate | |
| • 11n: Up to 450Mbps(dynamic) | |
| • 11g: Up to 54Mbps(dynamic) | |
| • 11b: Up to 11Mbps(dynamic) | |
| – | |
| EIRP | |
| • <20dBm(EIRP) | |
| – | |
| Reception Sensitivity | |
| • 270M: -68dBm@10% PER | |
| • 130M: -68dBm@10% PER | |
| • 108M: -68dBm@10% PER | |
| • 54M: -68dBm@10% PER | |
| • 11M: -85dBm@8% PER | |
| • 6M: -88dBm@10% PER | |
| • 1M: -90dBm@8% PER | |
| – | |
| Wireless Functions | |
| • Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics | |
| – | |
| Wireless Security | |
| • 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK | |
| – | |
| SOFTWARE FEATURES | |
| WAN Type | |
| • Dynamic IP/Static IP/PPPoE/ | |
| • PPTP(Dual Access)/L2TP(Dual Access)/BigPond | |
| – | |
| DHCP | |
| • Server, Client, DHCP Client List, Address Reservation | |
| – | |
| Quality of Service | |
| • WMM, Bandwidth Control | |
| – | |
| Port Forwarding | |
| • Virtual Server,Port Triggering, UPnP, DMZ | |
| – | |
| Dynamic DNS | |
| • DynDns, Comexe, NO-IP | |
| – | |
| VPN Pass-Through | |
| • PPTP, L2TP, IPSec (ESP Head) | |
| – | |
| Access Control | |
| • Parental Control, Local Management Control, Host List, Access Schedule, |
|
| Rule Management | |
| – | |
| Firewall Security | |
| • DoS, SPI Firewall | |
| • IP Address Filter/MAC Address Filter/Domain Filter | |
| • IP and MAC Address Binding | |
| – | |
| Management | |
| • Access Control | |
| • Local Management | |
| • Remote Management | |
| – | |
| System Requirements | |
| • Microsoft® Windows® 8/7/Vista/XP/2000, MAC® OS, NetWare®, UNIX® or |
|
| Linux | |
 |
Planet |
| WNRT-627 | |
| – | |
| 300Mbps 802.11n Wireless Broadband Router | |
 |
|
| Key Features: | |
 |
IEEE Compliant Wireless & Wired LANs |
| Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps |
|
| data rate | |
| Backward compatible with 802.11b/g standard | |
| Two 5dBi fixed antennas | |
| Equipped with four LAN ports (10/100Mbps) and one WAN port (10/100Mbps); |
|
| auto MDI/MDI-X supported | |
| – | |
| Fixed-Network Broadband Router | |
| Internet Types: Dynamic IP, Static IP, PPPoE, Telstra Big Pond, L2TP, PPTP | |
 |
Supports Static Routing, WDS, UPnP and Dynamic DNS |
| – | |
| Secure Network Connection | |
| Supports Wi-Fi Protected Setup (WPS) | |
| Advanced Security: 64/128/152-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK |
|
| with TKIP/AES encryption, and 802.1x authentication | |
| Supports NAT firewall features, with SPI function to protect against DoS attacks | |
| IP/Protocol-based access control and MAC filtering | |
 |
Supports Parental Control to restrict children to access to certain websites |
| and the time of surfing the Internet | |
| – | |
| Advanced Networking Function for Specific Applications | |
| Supports multiple sessions like IPSec, L2TP and PPTP VPN pass-through | |
| Supports virtual server, ALG, DMZ and UPnP for various networking applications | |
| Supports DHCP server | |
| Supports IGMP proxy/IGMP snooping for IPTV multicast stream | |
 |
– |
| Easy Installation and Management | |
| Web-based UI for quick setup and easy configuration | |
| Remote management allows configuration from a remote site | |
| System status monitoring includes DHCP Client and System Log | |
| Supports PLANET DDNS, Easy DDNS for quick access to Internet servers using |
|
| a domain name | |
| Easy AP discovery by PLANET Smart Discovery utility | |
| Planet | |
| WNRT-633 | |
| – | |
| 300Mbps 802.11n Wireless Gigabit Broadband Router | |
 |
 |
| Key Features: | |
| IEEE Compliant Wireless & Wired LANs | |
| Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps data rate | |
| Backward compatible with 802.11b/g standard | |
| Equipped with all Gigabit RJ-45 ports (10/100/1000Mbps) like 1 WAN and 4 LAN ports | |
| Auto MDI/MDI-X supported | |
| – | |
| Fixed-Network Broadband Router | |
| Supported Internet types: Dynamic IP/ Static IP/ PPPoE/ L2TP/ PPTP | |
 |
Supports Static & Dynamic (RIP1 and 2) Routing |
| Supports IP / MAC-based Bandwidth Control | |
| Supports 802.1d STP & IGMP Proxy | |
| – | |
| Secure Network Connection | |
| One-touch Wi-Fi Protected Setup (WPS) | |
| Advanced security: 64-/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK |
|
| (TKIP/AES encryption) and 802.1x Authentication | |
| Built-in NAT firewall is featured with Port/ IP/ MAC/ URL Filtering, and DoS protection | |
| Supports Multiple-SSID to allow users to access different networks through a single AP | |
| – | |
 |
Advanced Networking Function for Specific Applications |
| Supports multiple sessions IPSec, L2TP, PPTP, and IPv6 VPN pass-through | |
| Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking |
|
| applications | |
| Supports DHCP Server | |
| – | |
| Easy Installation and Management | |
| User Friendly Web-based UI and setup Wizard for easy configuration | |
| Remote Management allows configuration from a remote site | |
| System status monitoring includes DHCP Client List and System Log | |
| Planet | |
| WDRT-731U | |
| – | |
| 600Mbps Dual-Band 802.11n Wireless Gigabit Router | |
 |
 |
| Key Features: | |
| IEEE Compliant Wireless & Wired LANs | |
| Compliant with IEEE 802.11a/b/g/n dual band (2.4G & 5G) wireless |
|
| technology capable of up to 300+300Mbps data rate | |
| Equipped with all Gigabit RJ-45 ports (10/100/1000Mbps) (1 WAN and 4 LAN ports) | |
| Auto MDI/MDI-X supported | |
| LAN 4 supports IPTV pass-through enabling you to enjoy online videos | |
 |
– |
| Fixed-Network Broadband Router | |
| Supports WAN connection types: Dynamic IP / Static IP / PPPoE / PPTP / L2TP / |
|
| PPPoE Dual Access | |
| Supports Dynamic DNS and DHCP Server | |
| – | |
| Secure Network Connection | |
| Supports Wi-Fi Protected Setup (WPS) | |
| Advanced security: 64/128-bit WEP, WPA/WPA2 and WPA-PSK / WPA2-PSK |
|
| (TKIP/AES encryption) | |
| Supports NAT firewall, IP / Port / URL-based access control and MAC address filtering | |
 |
Supports dual-SSID to allow users to access different networks through one single AP |
| – | |
| Advanced Networking Function for Specific Applications | |
| Supports Bandwidth Control (QoS) based on different local IP addresses | |
| Supports NTP, Virtual Server, UPnP and DMZ for various networking applications | |
| Equipped with one USB port for sharing printers and USB mass storages wirelessly | |
| – | |
| Easy Installation and Management | |
| User-friendly Web-based UI with On-line Help | |
| Remote Management allows configuration from a remote site | |
| System status monitoring includes DHCP Client List and System Log | |
| 10/100M Switches | |
| Tenda | |
| S5 | |
| – | |
 |
5 port mini Fast Ethernet switch S5, based on the Atheros chipset. Fully |
| supports 802.3, 802.3u, and 802.3x. It is designed for use in homes and small |
|
| businesses. Tenda S5 switched data network using the RJ45 5 ports with a |
|
| transmission speed of 10/100 Mb/s, the automatic detection speed and the |
|
| type of cable connected, Auto-MDI/MDIX. |
|
| The device is powered by an external power supply. |
|
| – | |
| Specifications |
|
| • Method of control: without management | |
| • Number of RJ45 ports: 5 | |
| • Support PoE: no | |
| • Installation in cabinet: no | |
| • Power supply: External | |
| • Housing material: plastic | |
| • Resource Parameters: 9V DC 600mA | |
| • Dimensions (H x W x H): 24.8 x 95 x 87.2 mm | |
| • Chipset Manufacturer: Atheros | |
| Tenda | |
| S8 | |
| – | |
 |
8 port mini Fast Ethernet switch S5, based on the IC+ chipset. Fully |
| supports 802.3, 802.3u, and 802.3x. It is designed for use in homes and small |
|
| businesses. Tenda S8 switched data network using the RJ45 8 ports with a |
|
| transmission speed of 10/100 Mb/s, the automatic detection speed and the |
|
| type of cable connected, Auto-MDI/MDIX. |
|
| The device is powered by an external power supply. |
|
| – | |
| Specifications |
|
| • Method of control: without management | |
| • Number of RJ45 ports: 8 | |
| • Support PoE: no | |
| • Installation in cabinet: no | |
| • Power supply: External | |
| • Housing material: plastic | |
| • Resource Parameters: 9V DC 600mA | |
| • Dimensions (H x W x H): 31.7 x 140 x 90 mm | |
| • Chipset Manufacturer: IC+ | |
 |
TP-Link |
| SF1005D | |
| – |
|
| Switch TP-Link TL-SF1005D |
|
| 5-Port 10/100Mbps Desktop Switch | |
|
|
Innovative energy-efficient technology saves power up to 60% |
| Supports MAC address auto-learning and auto-aging | |
| Non-blocking switching architecture that forwards and filters packets at |
|
| full wire-speed for maximum throughput | |
| Auto-negotiation ports provide smart integration between 10Mbps and | |
| 100Mbps hardware | |
| Auto-MDI/MDIX eliminates the need for crossover cables | |
| Fanless design ensures quiet operation | |
| Plug and Play design simplifies installation | |
| Supports IEEE 802.3x flow control for Full Duplex mode and backpressure |
|
| for Half Duplex mode | |
 |
TP-Link |
| SF1008D | |
| – | |
| Switch TP-Link TL-SF1008D | |
| 8-Port 10/100Mbps Desktop Switch | |
| Innovative energy-efficient technology saves power up to 60% | |
|
|
Supports MAC address auto-learning and auto-aging |
| Non-blocking switching architecture that forwards and filters packets at |
|
| full wire-speed for maximum throughput | |
| Auto-negotiation ports provide smart integration between 10Mbps and | |
| 100Mbps hardware | |
| Auto-MDI/MDIX eliminates the need for crossover cables | |
| Fanless design ensures quiet operation | |
| Plug and Play design simplifies installation | |
| Supports IEEE 802.3x flow control for Full Duplex mode and backpressure |
|
| for Half Duplex mode | |
| |
|
 |
TP-Link |
| SF1016D | |
| – | |
| Switch TP-Link TL-SF1016D | |
| 16-Port 10/100Mbps Desktop Switch | |
| Innovative energy-efficient technology saves power up to 70% | |
| Supports MAC address auto-learning and auto-aging | |
 |
Non-blocking switching architecture that forwards and filters packets at |
| full wire-speed for maximum throughput | |
| Auto-negotiation ports provide smart integration between 10Mbps and | |
| 100Mbps hardware | |
| Auto-MDI/MDIX eliminates the need for crossover cables | |
| Fanless design ensures quiet operation | |
| Plug and Play design simplifies installation | |
| |
Supports IEEE 802.3x flow control for Full Duplex mode and backpressure |
| |
for Half Duplex mode |
| |
Up to 200Mbps full duplex bandwidth capability for high speed data |
| |
processing |
| Planet | |
| FSD-1606 |
|
| – | |
| 16-Port 10/100Mbps Fast Ethernet Desktop Switch | |
 |
 |
| Key Features: | |
| RJ-45 Interface | |
| Sixteen 10/100Mbps Fast Ethernet | |
 |
Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX |
| – | |
| Switching | |
| Hardware based 10/100Mbps Auto-Negotiation and Auto MDI/MDI-X | |
| Features Store-and-Forward mode with wire-speed filtering and forwarding rates | |
| Flow control for Full Duplex operation and back pressure for Half Duplex operation | |
| Integrates address look-up engine, supporting 4K absolute MAC addresses | |
| 1.625Mb RAM for Packet Buffer | |
| Switching Fabric: 3.2Gbps, Switch Throughput: 2.38Mpps | |
| Automatic address learning and address aging | |
| Complies with CSMA/CD protocol | |
| – | |
| Hardware | |
| Made from Plastic desktop size, wall mount design | |
| LED indicators for system power, per port Link / Act | |
| Supports to handle up to 1522bytes packet size | |
| External 9V DC, 1A Power Adapter | |
| FCC Class B, CE compliant | |
| Planet | |
| FNSW-1601 |
|
| – | |
| 16-Port 10/100Mbps Fast Ethernet Rackmount Switch | |
 |
 |
| Key Features: | |
| Physical Port | |
| 16 10/100Mbps Fast Ethernet ports | |
| Supports auto MDI/MDI-X function | |
| – | |
| Layer 2 Features | |
| Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX Ethernet standards | |
| Supports powerful Green Ethernet to power saving | |
| Features Store-and-Forward mode with wire-speed filtering and forwarding rates | |
| Handles up to 1522 bytes packet size | |
| Complies with IEEE 802.3x flow control for full duplex operation and back pressure |
|
| for half duplex operation | |
| Integrated address look-up engine, supports 8K absolute MAC addresses | |
| Automatic address learning and address aging | |
| Supports CSMA/CD protocol | |
| – | |
| Hardware Features | |
| 100~240V AC, 50~60Hz, 0.3A universal power input | |
| FCC, CE class A compliant | |
| Planet | |
| FNSW-2401 |
|
| – | |
| 24-Port 10/100Mbps Fast Ethernet Rackmount Switch | |
 |
 |
| Key Features: | |
| Physical Port | |
| • 24 10/100Mbps Fast Ethernet ports | |
| • Supports auto MDI/MDI-X function | |
| – | |
| Layer 2 Features | |
| • Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX Ethernet standard | |
| • Supports powerful Green Ethernet to power saving | |
| • Features Store-and-Forward mode with wire-speed filtering and forwarding rates | |
| • Handles up to 1522 bytes packet size | |
| • Complies with IEEE 802.3x flow control for full duplex operation and back pressure |
|
| for half duplex operation | |
| • Integrated address look-up engine, support 8K absolute MAC addresses | |
| • Automatic address learning and address aging | |
| • Support CSMA/CD protocol | |
| – | |
| Hardware Features | |
| • 100~240V AC, 50~60Hz, 0.3A universal Power input | |
| • FCC, CE class A compliant | |
 |
ToToLink |
| SW24 | |
| – | |
| SW24 is a 24-port Fast Ethernet Switch that provides 24port 10/100Mbps | |
 |
auto-negotiation RJ-45 ports for users to connect. All ports support Auto |
| MDI/MDIX function helps to figure out if the link needs a straight-through | |
| or cross-over connection automatically. | |
| The switch is plug-and-play and each port can be used as general ports | |
| or uplink ports. It can also be simply plugged into a server, a hub or a switch | |
| using straight cable or crossover cable. | |
 |
– |
| Features: | |
| • Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards. | |
| • Provides 24 10/100Mbps auto-negotiation ports. | |
| • Supports IEEE 802.3x flow control for full duplex mode and backpressure |
|
| for half-duplex mode. | |
| • Supports MAC address auto-learning and auto-aging. | |
| • LED indicators for monitoring power, link and activity. | |
| • Plastic case, desktop or wall-mounting design. | |
| • External power supply. | |
| Gigabit Ethernet Switch | |
| Tenda | |
| |
SG50 – 5 Ports |
| |
– |
 |
Description |
| Attractive MINI desktop design, 5-port Gigabit switch, fully supports 802.3, |
|
| 802.3 802.3ua and is intended for use in homes and small businesses. It also |
|
| provides 5 10/100/1000 Mbps auto-negotiation ports, and supports automatic |
|
| MDI/MDIX. Each gigabit port can not only be used as ordinary ports, but can |
|
| also cascade to other network devices through UPLINK port. Built-in surge |
|
| protection. |
|
| – |
|
 |
Specifications |
| Method of control: without management | |
| Number of 1GB RJ45 ports: 5 | |
| Power supply: External | |
| Housing Material: Plastic | |
 |
Resource Parameters: 9 V DC 600 mA |
| Working temperature: 0° to 40°C | |
| Cooling: Passive | |
| – | |
| Package |
|
| 1x Tenda SG50 | |
| 1x Quick Installation Guide | |
| 1x Power adapter (9V DC 600 mA) | |
| |
|
| Tenda | |
| SG80 – 8 Ports | |
| – | |
 |
Description |
| Attractive MINI desktop design, 8-port Gigabit switch, fully supports 802.3, |
|
| 802.3 802.3ua and is intended for use in homes and small businesses. It also |
|
| provides 8 10/100/1000 Mbps auto-negotiation ports, and supports automatic |
|
| MDI/MDIX. Each gigabit port can not only be used as ordinary ports, but can |
|
| also cascade to other network devices through UPLINK port. Built-in surge |
|
| protection. |
|
| – | |
 |
Specifications |
| Method of control: without management | |
| Number of 1GB RJ45 ports: 8 | |
| Power supply: External | |
| Housing Material: Plastic | |
 |
Resource Parameters: 9 V DC 600 mA |
| Working temperature: 0° to 40°C | |
| Cooling: Passive | |
| – | |
| Package |
|
| 1x Tenda SG80 | |
| 1x Quick Installation Guide | |
| 1x Power adapter (9V DC 600 mA) | |
| |
Tenda |
| |
G1008D – 8 Ports |
| |
– |
 |
8-port Gigabit switch, fully supports 802.3, 802.3 802.3ua and is intended |
| for use in homes and small businesses. Tenda G1008D switched data |
|
| network using the RJ45 8 ports with transfer rate 10/100/1000 Mb/s speed |
|
| automatic detection. Auto MDI / MDIX on each of the ports. Switching nodes |
|
| in the mode Store-and-Forward. Built-in surge protection. |
|
| The device is powered by an external power supply. | |
| – | |
 |
Specifications: |
| Mode of operation: No Management | |
| Number of 1GB RJ45 ports: 8 | |
| Support PoE: No | |
| Rack: No | |
| Power supply: External | |
| Housing Material: Plastic | |
| Tenda | |
| TEG1016D – 16 Ports | |
| – |
|
 |
Complies with IEEE 802.3x full-duplex and flow control |
| NMA auto-negotiation | |
| Supports UPnP | |
| Provides 16 auto-negotiation 10/100/1000Mbps LAN ports | |
| Supports auto MDI/MDIX | |
| Non-blocking | |
| Store-and-forward switching | |
| Integrated 8,000 MAC address table | |
| Provide status/diagnostic LED indicators | |
| 11” metal case | |
| 1U mounting kit included | |
| Planet | |
| GSD-1603 |
|
| – | |
| 16-Port 10/100/1000BASE-T Desktop Gigabit Ethernet Desktop Switch, Metal |
|
 |
(External Power) |
 |
|
| Key Features: | |
 |
Physical Port |
| 16 10/100/1000BASE-T Gigabit Ethernet ports | |
| Supports auto MDI/MDI-X function | |
| – | |
| Layer 2 Features | |
| Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab | |
| 1000BASE-T Ethernet standards | |
 |
Features Store-and-Forward mode with wire-speed filtering and forwarding rates |
| Integrated address look-up engine, supporting 8K absolute MAC addresses | |
| 9K jumbo packet support | |
| IEEE 802.1Q VLAN packet transparent support | |
| IEEE 802.3x flow control for full duplex operation and backpressure for half duplex | |
| operation | |
| Hardware based 10/100BASE-TX, half/full duplex and 1000BASE-T full duplex mode, | |
| flow control and auto-negotiation | |
| Automatic address learning and address aging | |
| Supports CSMA/CD protocol | |
| – | |
| Hardware Features | |
| Made of metal, desktop size and wall-mount design | |
| LED indicators for system power, per port Link/Act | |
| 12V DC, 1A external power adapter | |
| FCC, CE Class B compliant | |
| Planet | |
| GSW-1601 |
|
| – | |
 |
 |
| Key Features: | |
|
• Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab |
|
| 1000Base-T Ethernet standard | |
| • 16 10/100/1000Mbps Gigabit Ethernet ports | |
| • Features Store-and-Forward mode with wire-speed filtering and forwarding rates | |
| • Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, |
|
| flow control and auto-negotiation | |
| • IEEE 802.3x flow control for full duplex operation and backpressure for half duplex | |
| operation | |
| • Integrated address look-up engine, supports 8K absolute MAC addresses | |
| • 9K Jumbo packet support | |
| • Automatic address learning and address aging | |
| • Supports Auto MDI/MDI-X function | |
| • Supports CSMA/CD protocol | |
| •100-240V AC, 0.6A, 50/60Hz universal power input | |
| • FCC, CE class A compliant | |
| Planet | |
| GSW-2401 | |
| – | |
| 24-Port 10/100/1000Mbps Gigabit Ethernet Rackmount Switch | |
 |
 |
| Key Features: | |
| • Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab |
|
| 1000Base-T Ethernet standard | |
| • 16 10/100/1000Mbps Gigabit Ethernet ports | |
| • Features Store-and-Forward mode with wire-speed filtering and forwarding rates | |
| • Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, |
|
| flow control and auto-negotiation | |
| • IEEE 802.3x flow control for full duplex operation and backpressure for half duplex |
|
| operation | |
| • Integrated address look-up engine, supports 8K absolute MAC addresses | |
| • 9K Jumbo packet support | |
| • Automatic address learning and address aging | |
| • Supports Auto MDI/MDI-X function | |
| • Supports CSMA/CD protocol | |
| •100-240V AC, 0.6A, 50/60Hz universal power input | |
| • FCC, CE class A compliant | |
| Indoor Wifi Antennas | |
| – | |
 |
AB-COM |
| ABWIFI | |
| – | |
| WiFi USB Dongle 2,4GHz with antenna | |
| IEEE802.11n 150Mbps | |
| – | |
 |
Planet |
| ANT-OM9 |
|
| – | |
| 2.4GHz 9dBI Omni Directional Antenna / Indoor / ABS / RP-SMA male / 11b/g/n | |
 |
|
 |
Key Features: |
| Compatible with 2.4GHz 802.11n devices | |
| Optimal 9dBi high gain, capable of eliminating wireless dead spots | |
| Flexible RP-SMA plug (male) connector type fits all wireless equipment with an |
|
| RP-SMA Jack (female) antenna connector | |
| Adjustable 90-degree tilted axis for best wireless transmission | |
| 360 degrees of wireless network coverage, no aiming required | |
| High-quality, elegant and stylish design | |
| No configuration or installation software required | |
 —- |
|
| Ceiling-mount Wireless Access Point |
|
| – | |
| Planet | |
| WNAP-C3220A | |
| – | |
| 300Mbps 802.11n Ceiling-mount Wireless Access Point | |
 |
 |
| Key Features: | |
| Wireless Standard Compliance | |
| Compliant with IEEE 802.11n wireless technology with data rate of up to 300Mbps | |
| Backward compatible with 802.11b/g standard | |
| Supports IEEE 802.3af standard-based PoE or local AC power | |
| Built-in 2T2R, 3dbi antenna | |
| – | |
| Secure Network Connection | |
| Advanced security: 64-/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK | |
| (TKIP/AES encryption), 802.1x | |
| Supports wireless MAC address filtering control to limit the connected wireless clients | |
 |
– |
| Comprehensive Wireless Advanced Features | |
| Multiple operation modes including AP (Multi-SSIDs), Client, Repeater/ | |
| Universal Repeater, WDS Point-to-Point (PtP) and WDS Point-to-Multipoint (PtMP) | |
| Up to 5 multiple-SSIDs to allow users to access different networks through a single AP | |
| Supports WMM (Wi-Fi Multimedia) and wireless QoS to enhance the efficiency of | |
| multimedia application | |
| Supports IAPP (Inter Access Point Protocol) wireless roaming to enable clients to roam | |
| across multiple Aps | |
| Provides 5-level Transmitting Power Control to adapt various environments | |
 |
Wireless schedule allows administrators to enforce time-based internet access |
| Self-healing (Schedule Reboot) mechanism for reliable connectio | |
| – | |
| Easy Deployment & Centralized Management | |
| Supports AP controller to enable administrator to configure and monitor multiple APs | |
| simultaneously | |
| Flexible deployment with standard 802.3af PoE/ PD supported | |
| Sleek, ceiling-mountable design and position LED help to locate multiple APs with ease | |
| Step-by-step configuration with intelligent setup wizard and graphical | |
| Web-based UI | |
| Supports SNMP-based management interface | |
| System status monitoring including associated client list and system log | |
| |
|
| |
Planet |
| |
WDAP-C7400 |
| |
– |
| 900Mbps Dual Band Ceiling Mount Wireless Access Point | |
 |
 |
| Key Features: | |
| Standard Compliant Hardware Interface | |
| Complies with IEEE 802.11a/b/g/n Wireless LAN speed up to 900Mbps | |
| 2 x 10/100/1000Base-T Ports with 1-port PoE (PD, Powered Device) | |
| IEEE Standard 802.3at Power Over Ethernet Design | |
| – | |
| RF Interface Characteristics | |
| • 2.4GHz+5GHz Dual Band concurrent, more efficient in carrying high load traffic | |
 |
• 3T3R MIMO technology for enhanced throughput and coverage |
| • Built-in 4.5dBi dual-band antenna x 3 | |
| • High Output Power up to 500mW with multiple adjustable transmit power control | |
| • High Speed up to 900Mbps (450+450Mbps Transmit/Receive) data rate | |
| – | |
| Secure Network Connection | |
 |
Advanced security: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK |
| (TKIP/AES encryption) and RADIUS authentication | |
| Supports MAC address filtering | |
| – | |
| Easy Deployment & Centralized Management | |
| Stylish ceiling mount design | |
| User friendly Web-based UI | |
| SNMP-based management interface | |
| Centralized Management Utility allows administrator to monitor and configure | |
| In-Wall Wireless Access Point | |
| – | |
| Planet | |
| WNAP-W2201A | |
| – | |
| 300Mbps 802.11n In-Wall Wireless Access Point (EU Type) 86×86 mm | |
 |
 |
| Key Features: | |
| Standard Compliant Hardware Interface | |
| Compliant with IEEE 802.11n wireless technology with data rate of up to 300Mbps | |
| One 10/100BASE-TX port and one PoE powered device (PD) port | |
| One RJ11 port for phone line connection | |
| European 86-type wall outlet | |
| Built-in 3dBi antenna x 2 | |
 |
– |
| Secure Network Connection | |
| Advanced security: 64-/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK | |
| (TKIP/AES encryption), 802.1x | |
| Supports wireless MAC address filtering control to limit the connected wireless clients | |
| – | |
| Comprehensive Wireless Advanced Features | |
| Multiple operation modes including AP (Multi-SSIDs), Client, Repeater/ | |
| Universal Repeater, WDS Point-to-Point (PtP) and WDS Point-to-Multipoint (PtMP) | |
 |
Up to 5 multiple-SSIDs to allow users to access different networks through a single AP |
| Supports WMM (Wi-Fi Multimedia) and wireless QoS to enhance the efficiency of | |
| multimedia application | |
| Supports IAPP (Inter Access Point Protocol) wireless roaming to enable clients to roam | |
| across multiple Aps | |
| Provides 5-level Transmit Power Control to adapt various environments | |
| Wireless schedule allows administrators to enforce time-based internet access | |
| Self-healing (Schedule Reboot) mechanism for reliable connection | |
| – | |
 |
Easy Deployment & Centralized Management |
| Supports AP controller to enable administrator to configure and monitor multiple APs | |
| simultaneously | |
| Flexible deployment with standard 802.3af/at PoE/PD supported | |
| Stylish in-wall design perfectly matches the room decoration | |
| Step-by-step configuration with intelligent setup wizard and graphical | |
| Web-based UI | |
| Supports SNMP-based management interface | |
| System status monitoring including associated client list and system log | |
| High Power Wireless Outdoor Wifi Antennas | |
| |
– |
| |
UBIQUITI NETWORKS |
| |
UBNT NanoStationM5 outdoor MIMO 5GHz +16dBi ant. |
| |
NSM5 |
 |
– |
| Description: | |
| NanoStationM5 is a powerful complete outdoor unit including 2 x 16 dBi |
|
| antenna (MIMO) for the 5 GHz band. Unit allows real communication speeds up |
|
| to 150 Mbps. Another benefit is in addition to high transmission speed due to |
|
| use of 802.11n standard time multiplex TDMA, which allows the unit to the AP |
|
| to connect more than 300 clients, and low latency. Compared to its predecessor | |
| NanoStation5 has a stronger processor clocked at 400 MHz and more memory. | |
| Over 15km Outdoor Range | |
| – | |
| Technical specifications: | |
| Frequency (MHz): 5170 – 5825 | |
| Standards: 802.11a / n | |
| The maximum transfer rate: 300 Mbps | |
| LAN port: 2x RJ45 10/100 Mbps | |
| |
Power: 12 – 24V (PoE only) |
| |
Wireless Operation Modes: AP, Client, WDS |
| |
Operating modes: Bridge, NAT |
| |
DHCP server / client: Yes / Yes |
| |
Output for external antenna: Not |
| |
Encryption: WEP, WPA, WPA2 |
| |
Minimum sensitivity: -94 |
| |
Operating temperature: -30 to 75 ° C |
| |
Power control: Yes |
| |
Max. output power: 27dBm |
| |
Number of antennas: 2 |
| Viewing angle H / V: 43 ° / 41 ° | |
| Antenna Gain: 16dBi | |
| Airmax: Yes | |
| Chipset: Atheros | |
| Processor: MIPS 24KC, 400MHz | |
| RAM: 32 megabytes | |
| NAND: 8 megabytes | |
| Weight: 0.4 kg | |
| Operating System: AirOS | |
| Support for IPv6: Transparent (bridge mode) | |
| The default IP: 192.168.1.20 | |
| The default username / password: ubnt / ubnt | |
| Package Contents: equipment, PoE supply, power cable, manual, cable ties | |
| Outdoor use: Yes | |
| |
UBIQUITI NETWORKS |
| |
UBNT BulletM2-HP mini outdoor 2,4GHz 1xLAN Hi-Power 28dBm |
| |
BM2HP |
 |
– |
| Description: | |
| BulletM2HP is a miniature fastest 2.4 GHz outdoor client that can be easily | |
| mounted directly to the antenna. This eliminates the need to use lossy coaxial | |
| cable! With an integrated indicator signal intensity can be on site to direct the | |
| client correctly antenna. High transfer speed (up to 100 Mbps) is achieved by | |
| supporting the 802.11n standard, using only one antenna. Since older versions | |
| Bullet also differ more powerful processor, more memory and high sensitivity | |
| wireless. | |
| Note: | |
| * Bullet M2 HP works with any antenna with a Type N female connector | |
| ** Ethernet cable, Power supply and POE injector sold separately | |
| – | |
| Technical specifications: | |
| Frequency (MHz): 2412 – 2462 | |
| Standards: 802.11b/g/n | |
| The maximum transfer rate: 150 Mbps | |
| LAN port: 1x RJ45 10/100 Mbps | |
| Power: 12 – 24V (PoE only) | |
| Wireless Operation Modes: AP, Client, WDS | |
| Operating modes: Bridge, NAT | |
| DHCP server / client: Yes / Yes | |
| Output for external antenna: N-male | |
| |
Encryption: WEP, WPA, WPA2 |
| |
Minimum sensitivity: -96 |
| |
Operating temperature: 40 to 80 ° C |
| |
Power control: Yes |
| |
Max. output power: 28dBm |
| |
Airmax: Yes |
| |
Chipset: Atheros |
| Processor: MIPS 24KC, 400MHz | |
| RAM: 32 megabytes | |
| NAND: 8 megabytes | |
| Weight: 0.18 kg | |
| Operating System: AirOS | |
| Support for IPv6: Transparent (bridge mode) | |
| The default IP: 192.168.1.20 | |
| The default username / password: ubnt / ubnt | |
| Package Contents: Equipment, Rubber seal on UTP | |
| Outdoor use: Yes | |
| |
UBIQUITI NETWORKS |
| |
UBNT AirGrid M2 HP antenna 20dBi outdoor client MIMO 2,4GHz |
| |
AG-HP-2G20 |
| |
– |
 |
Description: |
| Frequency: 2.4 GHz | |
| Throughput: 100+ Mbps | |
| Range: 20+ km | |
| – | |
| Designed to be a highly directive CPE device. | |
| Ubiquiti’s InnerFeed™technology seamlessly combines the radio and reflector |
|
| feed for maximum RF performance. | |
| The airGrid®M requires no tools for assembly; only a single wrench is required |
|
| for pole-mounting. | |
| AirOS provides features such as wireless settings, bridge or routing |
|
| configuration and system management services. | |
| The TDMA airMAX protocol enables unprecedented scalability, high | |
| throughput and low latency in unlicensed, multipoint networks. | |
| – | |
| Using new technology, the new InnerFeed AirGrid Series M revolution in |
|
| the development of outdoor broadband wireless devices. Integrated antenna |
|
| and radio system delivers an affordable solution. Can be oriented to use either |
|
| vertical or horizontal polarization. Mechanical design provides resistance to |
|
| weathering. Enhanced RF and Ethernet ESD surge protection enables prolonged |
|
| operation in the harshest conditions. Additionally, AirControl application allows |
|
| operators to centrally manage hundreds of devices. | |
| – | |
| Technical specifications: | |
| • Frequency (MHz): 2412 – 2462 | |
| • Standards: 802.11b / g / n | |
| • The maximum transmission speed: 150 Mbps | |
| • LAN port: 1x RJ45 10/100 Mbps | |
| • Power: 12 – 24V (PoE only) | |
| • Wireless Operation Modes: AP, Client, WDS | |
| • Operating Modes: Bridge NAT | |
| • DHCP server / client: Yes / Yes | |
| • Output for external antenna: Not | |
| • Encryption: WEP, WPA, WPA2 | |
| • Minimum sensitivity:: -97 | |
| • Operating temperature: -30 to 75 ° C | |
| • Power regulation: Yes | |
| • Max. output power: 28dB | |
| • Number of antennas: 1 | |
| • Beam angle H / V: 30 ° / 30 ° | |
| • Antenna Gain: 20dBi | |
| • Airmax: Yes | |
| • Chipset: Atheros | |
| • Processor: 24KC MIPS 400 MHz | |
| • RAM: 32 megabytes | |
| • NAND: 8 megabytes | |
| • Weight: 2.8 kg | |
| • Operating System: AirOS | |
| • Support for IPv6: Transparent (bridge mode) | |
| • The default IP: 192.168.1.20 | |
| • The default username / password: ubnt / ubnt | |
| • Package Contents: equipment, PoE supply, power cable, manual, mounting |
|
| kit to attach the mast, sieve, plastic cover | |
| • Outdoor use: Yes | |
|
|
NanoBracket Universal Holder |
| 600034 | |
| – | |
| NanoBracket™ is ingenious mounting kit that enables simple, |
|
| safe and fast installation of all NanoStation from Ubiquiti |
|
| Networks, CPE TP-Link and other devices on |
|
| wall or pole and can be set to any direction in the range of 90° |
|
| with ball joint. | |
| – | |
| The holder mounts in the closest possible position to the center |
|
| of gravity of the mounted device, which makes the construction |
|
| more stable. NanoBracket is made of the highest quality UV |
|
| stabilized durable ABS plastic. | |
| – | |
| TP-Link | |
| TP-LINK 2.4GHz 300Mbps 9dBi Outdoor CPE | |
| CPE210 | |
 |
– |
| Overview: | |
| Built-in 9dBi 2×2 dual-polarized directional MIMO antenna | |
| Beam Width: 65° (H-Plane) / 35° (E-Plane) | |
| Adjustable transmission power from 0 to 27dBm/500mw | |
| System-level optimizations for more than 5km long range wireless |
|
| transmission | |
| TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology | |
| improves product performance in throughput, capacity and latency performance, |
|
| ideal for PTMP applications | |
| Centralized Management System – Pharos Control | |
| – | |
| AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes | |
| Passive PoE Adapter supports up to 60 meter Power over Ethernet |
|
| deployment and allows the device to be reset remotely | |
| – | |
| Technical Specification: | |
| Processor | |
| CPU: Atheros MIPS 74KC | |
| Internal Clock Rate: 560 MHz | |
| Memory | |
| Installed Buffer Memory Storage Capacity: 64 MB | |
 |
Installed Flash Memory Storage Capacity: 8 MB |
| Networking Specifications | |
| Data Link Protocol Supports: IEEE 802.11b/g/n | |
| Local Area Network Architecture: 10Base-T/100Base-TX | |
| Data Bit Rate: 300 Mbps | |
| Network/Transport Protocol: HTTP, DDNS, HTTPS, SNMP, SSH | |
| Frequency: 2.4 GHz | |
| Encryption Algorithm: 128-bit WEP, 152-bit WEP, 64-bit WEP, TKIP, WPA-PSK, |
|
| WPA2-PSK, WPA, WPA2 | |
| Networking Compliant Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n | |
| Selectable Channel Width: 5/10/20/40MHz | |
| Automatic Channel Selection | |
| Transmission Power Control | |
| Dynamic Frequency Selection (DFS) | |
| WDS Enable/Disable | |
| SSID Broadcast Enable/Disable | |
| Multi-SSID with VLAN Tagging (AP mode only) | |
| Distance/ACK Timeout Setting | |
| Wireless MAC Address Filter | |
| Wireless Advanced: | |
| > Beacon Interval/RTS Threshold/Fragmentation | |
| > Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia | |
| Device Location: Outdoor | |
| Mounting Capability: Pole Mounting | |
 |
Certifications: CE, FCC, RoHS, IPX5 |
| System Tools | |
| Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/ | |
| Memory | |
| Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP | |
| Spectrum Analyzer | |
| Speed Test | |
| Ping | |
| Traceroute | |
| System-level Optimizations | |
| Optimized IGMP Snooping/Proxy for multicast applications | |
| Hardware watch dog | |
| Interface Provided | |
| WAN/LAN Ethernet 10Base-T/100Base-T Port Quantity: 2 | |
| WAN/LAN Ethernet 10Base-T/100Base-T Port Connector Type: RJ-45 | |
| Power | |
| Power Device Location: External | |
| Maximum Input Current: 0.8 A | |
| Maximum Input Frequency: 60 Hz | |
| Minimum Input Frequency: 50 Hz | |
| Maximum Input Voltage: 240 V | |
| Minimum Input Voltage: 100 V | |
| Environment | |
| Maximum Operating Ambient Temperature: 70 °C | |
| Maximum Operating Humidity: 90% | |
| Minimum Operating Ambient Temperature: -30 °C | |
| Minimum Operating Humidity: 10% | |
| Package Contents | |
| Outdoor Wireless CPE | |
| 24V 1A Passive PoE Adapter | |
| Pole Mounting Straps | |
| AC Power Cord | |
| Installation Guide | |
| POE ADAPTER FEATURES | |
| Button | |
| Remote Reset Button | |
| TP-Link | |
| TP-LINK 5GHz 300Mbps 13dBi Outdoor CPE | |
| CPE510 | |
 |
– |
| Overview: | |
| Built-in 13dBi 2×2 dual-polarized directional MIMO antenna | |
| Beam Width: 45° (H-Plane) / 30° (E-Plane) | |
| Adjustable transmission power from 0 to 27dBm/500mw | |
| System-level optimizations for more than 15km long range wireless |
|
| transmission | |
| TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology | |
| improves product performance in throughput, capacity and latency |
|
| performance, ideal for PTMP applications | |
| Centralized Management System – Pharos Control | |
| AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes | |
| Passive PoE Adapter supports up to 60 meter Power over Ethernet |
|
| deployment and allows the device to be reset remotely | |
| – | |
| Technical Specification: | |
| Processor | |
| CPU: Qualcomm Atheros AR9350B | |
| Internal Clock Rate: 560 MHz | |
| Memory | |
| Installed Buffer Memory Storage Capacity: 64 MB | |
 |
Installed Flash Memory Storage Capacity: 8 MB |
| Networking Specifications | |
| Data Link Protocol Supports: Fast Ethernet/Ethernet | |
| Local Area Network Architecture: 10Base-T/100Base-TX | |
| Switching Protocol: Ethernet | |
| Network/Transport Protocol: HTTP, DDNS, HTTPS, SNMP, SSH | |
| Data Bit Rate: 300 Mbps | |
| Frequency: 5 GHz | |
| Encryption Algorithm: 128-bit WEP, 152-bit WEP, 64-bit WEP, TKIP, WPA-PSK, |
|
| WPA2-PSK, WPA, WPA2 | |
| Networking Compliant Standards: IEEE 802.11a, IEEE 802.11n | |
| Selectable Channel Width: 5/10/20/40MHz | |
| Automatic Channel Selection | |
| Transmission Power Control | |
| Dynamic Frequency Selection (DFS) | |
| WDS Enable/Disable | |
| SSID Broadcast Enable/Disable | |
| Multi-SSID with VLAN Tagging (AP mode only) | |
| Distance/ACK Timeout Setting | |
| Wireless MAC Address Filter | |
| Wireless Advanced: | |
| > Beacon Interval/RTS Threshold/Fragmentation | |
| > Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia | |
| Device Location: Outdoor | |
 |
Mounting Capability: Pole Mounting |
| Certifications: CE, FCC, RoHS, IPX5 | |
| System Tools | |
| Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/ | |
| Memory | |
| Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP | |
| Spectrum Analyzer | |
| Speed Test | |
| Ping | |
| Traceroute | |
| System-level Optimizations | |
| Optimized IGMP Snooping/Proxy for multicast applications | |
| Hardware watch dog | |
| Interface Provided | |
| WAN/LAN Ethernet 10Base-T/100Base-T Port Quantity: 2 | |
| WAN/LAN Ethernet 10Base-T/100Base-T Port Connector Type: RJ-45 | |
| Power | |
| Power Device Location: External | |
| Maximum Input Current: 0.8 A | |
| Maximum Input Frequency: 60 Hz | |
| Minimum Input Frequency: 50 Hz | |
| Maximum Input Voltage: 240 V | |
| Minimum Input Voltage: 100 V | |
| Environment | |
| Maximum Operating Ambient Temperature: 70 °C | |
| Maximum Operating Humidity: 90% | |
| Minimum Operating Ambient Temperature: -30 °C | |
| Minimum Operating Humidity: 10% | |
| Package Contents | |
| Outdoor Wireless CPE | |
| 24V 1A Passive PoE Adapter | |
| Pole Mounting Straps | |
| AC Power Cord | |
| Installation Guide | |
| POE ADAPTER FEATURES | |
| Button | |
| Remote Reset Button | |
| TP-Link | |
| 2.4GHz 24dBi Outdoor Grid Parabolic Antenna | |
| TL-ANT2424B | |
 |
– |
| Main features: |
|
| 24 dBi directional performance is ideal for outdoor directional connection for | |
| very long distance | |
| Weather-resistant, suitable for all weather conditions | |
| Socket Connector N type, suitable for most outdoor solutions | |
| Easy installation with mounting kits | |
| – | |
| What is this product |
|
| Grid parabolic antenna TL-ANT2424B is designed for the spread spectrum |
|
| system, which operates in the 2.4-2.5 GHz and provides 24 dBi directional |
|
| performance. Surface construction with welded steel reflector ensures |
|
| excellent performance. This antenna is a high performance, long range, low |
|
| weight, compact design and high wind resistance. It is designed for outdoor |
|
| use and has a range of up to 56 km. | |
| – | |
| Easy to use |
|
| Installing the Antenna TL-ANT2424B is simple and straightforward. It is |
|
| compatible with most wireless devices (Access Points, Routers, Bridges and |
|
| Network Adapters) on the market equipped with a detachable external antenna. | |
| – | |
| Specifications |
|
| Complies with 802.11n/b/g (2.4 GHz) | |
| Signal Gain 24 dBi | |
| Socket Connector N Female | |
| PoE Power Injector | |
| – | |
| Tenda | |
| POE15F – Fast Power Injector PoE AF 15.4W | |
 |
– |
| 1-port 100Mbps PoE injector. Standard 802.3af, max. Output power 15.4W. |
|
| Transmission speed up to 10/100 Mbps FD. |
|
| – | |
| Description |
|
| The PoE injector PoE15F can realize synchronous delivery of device network |
|
| data and power via one Ethernet cable (Cat.5 or better). The max. output |
|
| power is 15.4W, which can serve as an outlet for a PoE device (powering via | |
 |
RJ45 port). You can connect PoE15F to an IEEE 802.3af compliant PD, such |
| as wireless AP, IP camera, IP phone, etc. It eliminates the need for the |
|
| availability of electrical outlets in the vicinity of the active device. In a sense, | |
| it is a good choice for you to reduce the installation cost and improve the |
|
| network performance. |
|
| – | |
| Main Features | |
| >> Delivers power and data through one Ethernet cable for easy network extension | |
| >> Compatible with IEEE 802.3af compliant powered devices | |
| >> PoE Port Delivers power up to 100 meters | |
| >> Plug and Play, no configuration required | |
| – | |
| Specifications |
|
| Standards: 802.3af 802.3, 802.3u | |
| Transmission speed: 10/100 Mbps full-duplex | |
 |
Method of control: without management |
| Interface: 1x Ethernet 100Mbps LAN (PoE IN), 1x Ethernet 100Mbps LAN |
|
| (PoE + Data OUT) | |
| Type: indoor | |
| Housing material: plastic | |
| Input power: 230 VAC | |
| Power output: 48V DC 350mA (16.8W) | |
| Consumption: 1.4W | |
| Cooling: passive | |
| Operating temperature: 0° to 40°C | |
| – | |
| Package |
|
| 1x Tenda POE15F | |
| 1x Quick Installation Guide | |
| 1x Power Cord | |
| Tenda | |
| POE30G-AT – Gigabit Power Injector PoE AF/AT 30W | |
| – | |
 |
1-port Gigabit PoE injector. Standard 802.3af, 802.3at, max. 30W power |
| supplied 48V. Transmission speed up to 10/100/1000 Mbps FD. |
|
| Automatic detection of PD. | |
| – | |
| Description |
|
| The Gigabit PoE injector PoE30G-AT can realize synchronous delivery of |
|
| device network data and power via one Ethernet cable (Cat.5e or better). |
|
| The max. output power is 30W, which can serve as an outlet for a PoE device |
|
| (powering via RJ45 port). You can connect PoE30G-AT to an IEEE802.3af/at |
|
 |
compliant PD, such as wireless AP, VoIP phone, IP camera, web cam, etc. |
| It eliminates the need for the availability of electrical outlets in the vicinity |
|
| of the active device. In a sense, it is a good choice for you to reduce the |
|
| installation cost and improve the network performance. |
|
| – | |
| Main Features | |
| >> PoE ports supports IEEE802.3at and IEEE802.3af standard | |
| >> Equipped with gigabit port, blazing-fast transfer rate, maximum transfer |
|
| rate of up to 30W for single port | |
| >> power distance extension of up to 100 meters for standard Cat5e and |
|
| Cat6 Ethernet cable | |
| >> Plug and play, no any configuration required | |
| – | |
| Specifications |
|
| Standards: 802.3af, 802.3at, 802.3, 802.3u, 802.3ab | |
| Baud Rate: 10/100/1000 Mbps full-duplex | |
| Method of control: without management | |
| Network functions: automatic detection of PD devices | |
| Interface: 1x GbE LAN (PoE IN), 1x GbE LAN (PoE + Data OUT) | |
| Type: indoor | |
| Housing material: plastic | |
| Power Input: 230 VAC | |
| Power Output: 48V DC, 30W | |
| Consumption: 2.2W | |
| Cooling: passive | |
| Operating temperature: 0° to 40°C | |
| – | |
| Package |
|
| 1x Tenda PoE30G-AT | |
| 1x Quick Installation Guide | |
| 1x Power Cord | |
| 10/100Mbps 802.3af/at PoE Switch | |
| – | |
| Planet | |
| FSD-504HP – Fast PoE Switch AF/AT 60W | |
| – | |
| 4-Port 10/100Mbps 802.3af/at PoE + 1-Port 10/100Mbps Desktop Switch (60 Watts) | |
 |
 |
| Key Features: | |
| RJ45 Interface | |
 |
Five 10/100Mbps Fast Ethernet ports |
| 4 ports support 51V DC power to PoE powered device | |
| – | |
| Power over Ethernet | |
| Complies with IEEE 802.3af/at Power over Ethernet end-span + mid-span PSE | |
| Up to 4 IEEE 802.3af/2 IEEE 802.3at devices powered | |
| Supports PoE power up to 30 watts for each PoE port | |
 |
60-watt PoE budget |
| Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” | |
| mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and | |
| VLAN isolation | |
| Auto detects powered device (PD) | |
| Circuit protection prevents power interference between ports | |
 |
Remote power feeding up to 100m in the standard mode |
| – | |
| Switching | |
| Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X | |
| Flow control for full duplex operation and back pressure for half duplex operation | |
| 1536bytes packet size support | |
| Integrates address look-up engine, supporting 1K absolute MAC addresses | |
| Automatic address learning and address aging | |
| Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing | |
| – | |
| Hardware | |
| Desktop palm size | |
| LED indicators for PoE ready/activity and LINK/ACT | |
| One 51V DC power jack | |
| 10/100/1000Mbps 802.3af/at PoE Switch | |
| – | |
| Planet | |
| GSD-604HP – Gigabit Switch AF/AT 55W | |
| – | |
| 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Desktop Switch | |
| (External 55 Watts) | |
 |
 |
| Key Features: | |
 |
RJ45 Interface |
| 6 10/100/1000Mbps Gigabit Ethernet ports | |
| 4 ports support 54V DC power to PoE powered device | |
| – | |
| Power over Ethernet | |
| Complies with IEEE 802.3af/at Power over Ethernet end-span PSE | |
 |
Up to 4 IEEE 802.3af/at devices powered |
| Supports PoE power up to 30 watts for each PoE port | |
| 55-watt PoE budget | |
| Auto detects powered device (PD) | |
| Circuit protection prevents power interference between ports | |
| Remote power feeding up to 100m | |
| – | |
| Switching | |
| Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X | |
| Flow control for full duplex operation and back pressure for half duplex operation | |
| 9216 bytes jumbo packet size support | |
| Integrates address look-up engine, supporting 8K absolute MAC addresses | |
| Automatic address learning and address agin | |
| Supports port-based VLAN and loop protection | |
| – | |
| Hardware | |
| LED indicators for PoE ready and LINK/ACT | |
| One 55V DC power jack | |
| Planet | |
| GSD-908HP – Gigabit Switch AF/AT 120W | |
| – | |
| 8-Port 10/100/1000T 802.3at PoE + 1-Port Gigabit Desktop Switch (120 Watts) | |
 |
 |
| Key Features: | |
| RJ-45 Interface | |
| Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab | |
| 1000Base-T | |
| 9-Port 10/100/1000Mbps Gigabit Ethernet Switch | |
| 8-Port supports 51V DC power to PoE Powered Device (Port 1 to port 8) | |
| – | |
| Power over Ethernet | |
| Complies with IEEE 802.3af / 802.3at Power over Ethernet End-Span PSE | |
| 120-watt PoE budget | |
| Up to 8 IEEE 802.3af devices powered | |
| Supports PoE Power up to 15.4 watts for each PoE port | |
| Up to 4 IEEE 802.3at devices powered | |
| Supports PoE Power up to 30 watts for each PoE port | |
| Auto detects powered device (PD) | |
| Circuit protection prevents power interference between ports | |
| Remote power feeding up to 100m | |
| – | |
| Switching | |
| Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, | |
| flow control and auto-negotiation and auto MDI/MDI-X | |
| Features Store-and-Forward mode with wire-speed filtering and forwarding rates | |
| IEEE 802.3x flow control for full duplex operation and back pressure for half duplex | |
| operation | |
| Integrates address look-up engine, supporting 4K absolute MAC addresses | |
| 192 KB packet buffer | |
| 9K Jumbo frame supports at 1000Mbps duplex mode | |
| Automatic address learning and address aging | |
| Supports CSMA/CD protocol | |
| – | |
| Hardware | |
| Made of metal, desktop size and wall-mount design | |
| LED indicators for system power, PoE usage 100%, per port PoE In-Use (Port 1 | |
| to port 8), per port Link / Act (10/100/1000Mbps, port 1 to port 9) | |
| 51V DC, 2.5A external power adapter | |
| FCC, CE Class A compliant | |
| RSMA & Pigtail N Cables | |
| RSMA male to RSMA female cable | |
| – | |
 |
Code: RSFM-2 |
| Cable attenuation at 2.4GHz: <2 dB | |
| Length: 2m | |
| – | |
| Code: RSFM-4 | |
| Cable attenuation at 2.4GHz: <2.5 dB | |
| Length: 4m | |
| – | |
| Code: RSFM-5 | |
| Cable attenuation at 2.4GHz: <3.5 dB | |
| Length: 5m | |
| Code: RSFM-7 | |
| Cable attenuation at 2.4GHz: <4.5 dB | |
| Length: 7m | |
 |
RSMA male to Pigtail N male cable |
| – | |
| Code: NMRM-0.3 | |
| Length: 0.3m | |
| – | |
| Code: NMRM-2 | |
| Cable attenuation at 2.4GHz: <2 dB | |
| Length: 2m | |
| – | |
| Code: NMRM-4 | |
| Cable attenuation at 2.4GHz: <2 dB | |
| Length: 4m | |
| Lan Cables | |
 |
TM-3055WP – Outdoor Cat5e UTP cable – TECHNOMATE |
| 100MHz CAT5e cable | |
| High-quality 24AWG | |
| 4-Pair UTP Copper Clad | |
| Ideal for high-speed applications including Gigabit Ethernet | |
| Can be used indoors or outdoors | |
| Suitable for clipping to the exterior of buildings | |
| Verified to TIA/EIA-568B | |
| Pull Box | |
| Color: black | |
| Length: 305m | |
 |
907025 – Cat5e FTP cable |
| FTP CAT5E 24AWG 1/0.51mm Bare Solid CCA | |
| Conductor: Bare Solid CCA | |
| Conductor Dia.:0.51mm±0.005mm (24AWG) | |
| Pair Insulation:Polyethylene | |
| Shielding:Aluminum-Polyester | |
| Foil;110% Coverage | |
| Outer Cable Diameter: 5.2± 0.2 mm | |
| Outer Jacket: PVC, Grey color | |
| Drain wire | |
| Length: 100m | |
| |
|
 |
907024 – Cat5e FTP cable |
| FTP CAT5E 24AWG 1/0.51mm Bare Solid CCA | |
| Conductor: Bare Solid CCA | |
| Conductor Dia.:0.51mm±0.005mm (24AWG) | |
| Pair Insulation:Polyethylene | |
| Shielding:Aluminum-Polyester | |
| Foil;110% Coverage | |
| Outer Cable Diameter: 5.2± 0.2 mm | |
| Outer Jacket: PVC, Grey color | |
| Drain wire | |
| Pull Box | |
| Length: 305m | |
 |
TM-3056 – Cat6 UTP cable – TECHNOMATE |
| 250MHz Cat6 cable | |
| High-quality 23AWG | |
| 4-Pair UTP Copper Clad | |
| Ideal for high-speed applications including Gigabit Ethernet | |
| Verified to TIA/EIA-568B | |
| Pull Box | |
| Color: Grey | |
| Length: 305m | |
| |
|
 |
TM-3056WP – Outdoor Cat6 UTP cable – TECHNOMATE |
| 250MHz CAT6 UTP Outdoor cable | |
| High-quality 23AWG | |
| 4-Pair UTP Copper Clad | |
| Ideal for high-speed applications including Gigabit Ethernet | |
| Can be used indoors or outdoors | |
| Suitable for clipping to the exterior of buildings | |
| Verified to TIA/EIA-568B | |
| Pull Box | |
| Color: Black | |
| Length: 305m | |
 |
907069 – Cat6 FTP cable |
| – | |
| Cat6 Shielded | |
| Conductor: 0.57mm±0.005mm (23AWG) CCA |
|
| Insulation material: Colored PE, OD 1.03mm | |
| 4 twisted pairs | |
| Shielding materials: PET, Al Foil, Drain wire 1/0.40 CCA | |
| Jacket material: PVC CM, OD 6.2 ± 0.2 mm | |
| Length: 305m | |
| Pull Box | |
 |
907118 – Cat7 FFTP cable |
| – | |
| Cat7 Shielded | |
| Conductor: 1/0.585x4P (23AWG) CU | |
| Insulation material: SKIN-FOAM-SKIN PE | |
| Insulation thickness: 0.43mm, OD 1.45mm | |
| 4 twisted pairs | |
| Shielding materials: AL/Polyester, Drain wire AL/Polyester | |
| Jacket material: PVC, Thickness: 0.65mm, OD 7.5 ± 0.2mm | |
| Length: 100m | |
| PATCH-CABLE UTP and FTP Cat 5e | |
 |
PP12-05 – 0.5m |
| PP12-1 – 1m | |
| PP12-2 or 907064 – 2m | |
| Ti8-3 or PP12-3 – 3m | |
| 907066 – 5m | |
| Ti9-6EBL- 6m | |
| PP12-10 – 10m | |
| PP12-15 or 907106 – 15m | |
| Ti8-20 or PP12-20 – 20m | |
| 907108 – 25m | |
| – |
|
| Descript.: Western 8/8-plug (RJ45) to Western 8/8-plug (RJ45) | |
| Details: 1:1 connected, twisted pair, category 5e |
|
| Network CAT line tester | |
 |
50946 |
| – |
|
| CAT line tester | |
| Network tester for RJ45 | |
| – |
|
| – |
|
| – | |
| – | |
| – | |
| USB Cable |
|
 |
USB-0.5E |
| – | |
| USB cable Type-A Male to Type-A Female | |
| Length: 0.5 meters | |
| Certified for USB2.0 (1.5 / 12 / 480Mbps) | |
| USB cable for extension | |
| Plugs, coupler & tools | |
 |
TS14-8L |
| – |
|
| Western 8/8-plug (RJ45) | |
| 8 contacts for Cat5 cable | |
| – |
|
 |
900034 |
| – | |
| Western 8/8-plug (RJ45) | |
| 8 contacts for Cat5 cable | |
| – | |
 |
900025 |
| – | |
| Shielded western 8/8-plug (RJ45) | |
| 8 contacts for Cat5 cable | |
| – | |
 —– |
900029 |
| – | |
| Shielded western 8/8-plug (RJ45) | |
| 8 contacts for Cat6 cable | |
| – | |
 |
900083 |
| – | |
| RJ11 6P4C | |
| Telephone Connector |
|
| – | |
 |
900084 |
| – | |
| 431A, BT plug, UK | |
| Telephone Connector |
|
| – | |
 |
490115 |
| – | |
| Professional Crimp Pliers for 6P & BT plug | |
| – | |
 |
04423 |
| – | |
| Crimp Pliers with cable stripper for Western-plugs |
|
| 8/8 (RJ45) | |
 |
T-WC-02 |
| – | |
| Professional Crimp Pliers for Western-plugs RJ45/RJ12/RJ11 | |
| 8P8C, 6P6C, 6P4C |
|
| Ratchet mechanism | |
 |
490160 |
| – | |
| Professional Crimp Pliers for Western-plugs |
|
| 8P8C/RJ45, 6P4C/RJ-11, 6P6C/RJ-12, 4P4C and 4P2C/RJ22 | |
| Ratchet mechanism | |
 |
FZ066 |
| Cat5, RG59, RG6, RG11 | |
| cable stripper and cutter | |
| – | |
| – | |
 |
4529 |
| – | |
| Cat5, Cat6, RG59, RG6 | |
| cable stripper and punch tool | |
| – | |
 |
TS15-8L |
| – | |
| Western 8/8-jack to Western 8/8-jack (RJ45) | |
| 1:1 connected | |
| color: white | |
| – | |
 |
TI5L |
| – | |
| Western 8/8-jack to Western 8/8-jack (RJ45) | |
| 1:1 connected | |
| full shielded | |
| – | |
 |
907008 |
| – |
|
| Cover plus CAT5e RJ45 and UK type Telephone plugins | |
| Interchangable plugins | |
| – | |
| 550419 | |
| Same as 907008 without Telephone plugin | |
| – |
|
| Dimensions (mm):81 x 81 | |
 |
550409 |
| Plugin UK type telephone jack | |
| Interchangable plugin | |
| for 907008 | |
 |
490138 |
| Inserter Wire No. 2a | |
| Punch down tool and also | |
| comes with a tool for | |
| removing wires from | |
| sockets | |
| Tool both inserts the wire | |
| into the connector and | |
| cuts off the excess wire | |
| in one action | |
Ceiling-mount Wireless Access Point
Leave A Comment
You must be logged in to post a comment.