TM-RFHD IR

HDMI input encoder – modulator to DVB-T (MPEG4) with IR Extender

Description

Description

Agile HD DVB-T TV modulator with IR Extender
The fastest modulator in the market !!! 

Description:
Crystal clear picture quality, 1080p Full HD at its best, giving you the same picture quality as an HDMI cable with minimal delay. Less than 0.8s delay from the HDMI device, making channel changes super fast. Furthermore, if using for video only devices such as a CCTV system, this can be reduced to less than 0.5s making mouse movement extremely quick.

9V Infra-Red extender over the coaxial cable controls your source from another TV. It also has an HDMI Loop-through to split the video to a local TV, saving on the cost and space of a 2-way HDMI Splitter.

It has built-in dB level adjustment and many advanced menu options to configure your set up. All settings are controlled via the onboard menu screen and buttons.

Any HDMI Source
Connect any HDMI device such as a Satellite Receiver, CCTV system, Blu-ray player, TV Box, etc and watch it in crystal clear Full HD 1080p over a coaxial RF system. You can also watch on many TVs using a passive splitter or an amplifier.

Can be used in existing RF systems
If you already have a Standard Definition RF distribution system but your source device is in High-Definition, just swap your existing RF modulator to this and watch in High-Definition 1080p Full HD on a DVB-T compatible TV. The cabling is exactly the same. *please note, TV must be 1080p Full HD or 4K UHD (HD Ready models are not compatible).

Control your source device from any room
The amazing RF Infra-Red technology allows you to control your source device from any TV using the same coaxial cable. It includes an IR Transmitter which has to be placed in front of your source device. It also includes an IR Receiver (“Magic Eye”) to allow remote control from the second TV. If you would like to control from more TVs, please refer to Watch on Multiple TVs below.

Watch on Mutliple TVs
To split the audio/video to multiple TVs and add extra Infra-Red Receivers it is required to add an active splitter or a passive bi-directional DC power pass splitter which can allow the 9V IR Infra-Red remote control signal to be passed through so that you can control the source device via remote control at every TV. Additional Infra-Red Receivers (“Magic Eyes”) are available.

Connect Multiple Sources 
Can also be cascaded with up to 35 TM-RF HD IRs in one system so you can watch different devices on different TVs! Such as Satellite on TV1, another Satellite channel on TV2, CCTV on TV3, etc.

To make cascading even easier and save time, you can upload the data to a USB device and configure the settings on your PC for each TM-RF HD IR and then download those settings back into the modulator.

Installation Tips:
Splitting: an active splitter or a passive bi-directional DC power pass splitter can be used. Furthermore, mains powered amplifiers/splitters can also be used which can send 9V IR Infra-Red remote control signals so that you can control the source device via remote control at every TV.
This modulator does not need an attenuator. dB can be adjusted in the menus.
Lip Sync: the TM-RF HD has been tested with many devices such as Sky, Virgin, BT, Blu-ray Players, Playstation, Xbox and there are no issues.
Compatibility: this only works on 1080p Full HD & 4K UHD TVs. If your TV is 720p HD Ready, it will not work directly however, you can use a Terrestrial HD receiver (DVB-T/T2 box) with the TM-RF HD to make it work on an HD Ready TV.
Connect Multiple Sources: can also be cascaded with up to 35 TM-RF HD in one system so you can watch different devices on different TVs! Such as Satellite on TV1, another Satellite channel on TV2, CCTV on TV3, etc.
Control your source device/s from any room: Extra IR Eyes are available for multiple TVs.

Features:
• HDMI DVB-T RF Modulator
• 1080p High-Definition over RF
• 9V Infra-Red over RF (via on/off switch)
• Converts an HDMI signal into an HD digital DVB-T compatible signal
• HDMI Input
• HDMI Loop-though
• Cascadable with Easy Config
• Requires a DVB-T or DVB-T2 compatible TV (must be 1080p or 4K UHD)
• Send 1080p High-Definition video quality with audio over an RF distribution system
• LCD screen for easy setup & configuration
• DVB-T COFDM Modulation
• Channel Name Edit
• Compatible with international standards
• Bandwidth – 6Mhz, 7Mhz, 8Mhz
• Configure: Bandwidth, Constellation, FEC, ONID, LCN
• USB – software and cascade updates only
• Includes IR Transmitter and 9V IR Receiver (Eye)
• Wall Mountable Metal Housing

Optional: Extra 9V IR extender Receivers for multiple TVs, TM-LINK

TECHNOMATE

Brand

Brand

Technomate

Title

Go to Top